DOWNLOAD Sharp CD-CH1000 (serv.man12) Service Manual ↓ Size: 224.48 KB | Pages: 2 in PDF or view online for FREE

Model
CD-CH1000 (serv.man12)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
224.48 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / Safety precautions
File
cd-ch1000-sm12.pdf
Date

Sharp CD-CH1000 (serv.man12) Service Manual ▷ View online

CD-CH1000H/CD-CH1000W
– 2 –
SAFETY PRECAUTION FOR
SERVICE MANUAL
(FOR CD-CH1000H)
Precaution to be taken when replacing and servicing the
Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output
for this model is specified to be lower than Class I Requirements.
However, the following precautions must be observed during
servicing to protect your eyes against exposure to the Laser
beam.
(1) When the cabinet has been removed, the power is turned
on without a compact disc, and the Pickup is on a position
outer than the lead-in position, the Laser will light for several
seconds to detect a disc. Do not look into the Pickup Lens.
(2) The Laser Power Output of the Pickup inside the unit and
replacement service parts have already been adjusted prior
to shipping.
(3) No adjustment to the Laser Power should be attempted
when replacing or servicing the Pickup.
(4) Under no circumstances look directly into the Pickup Lens
at any time.
(5) CAUTION - Use of controls or adjustments, or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
(For U.K.)
(Except for U.K.)
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
CAUTION-INVISIBLE  LASER  RADIATION  WHEN  OPEN.  DO  NOT  STARE  INTO 
BEAM  OR  VIEW  DIRECTLY  WITH  OPTICAL  INSTRUMENTS.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.  STIRRA
EJ  IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN   MED  OPTISKA  INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  VED  ABNING.  SE  IKKE  IND  I 
STRALEN-HELLER  IKKE  MED  OPTISKE  INSTRUMENTER.
VARO!  AVATTAESSA  OLET  ALTTIINA  NAKYMATON  LASERSATEILYLLE.
ALA  TUIJOTA  SATEESEEN  ALAKA  KATSO  SITA  OPTISEN  LAITTEEN  LAPI.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.
STIRRA  EJ IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN  GENOM  OPTISKT  
INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  NAR  DEKSEL  APNES.  STIRR IKKE  
INN  I  STRALEN  ELLER  SE  DIREKTE  MED  OPTISKE  INSTRUMENTER.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERAS. KAN ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR
LASERKLASS 1.
– 3 –
CD-CH1000H/CD-CH1000W
SAFETY PRECAUTION FOR SERVICE MANUAL (FOR CD-CH1000W)
WARNINGS
THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER
COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR CLASS 1. THEREFORE IT IS
IMPORTANT THAT THE FOLLOWING PRECAUTIONS ARE OBSERVED DURING SERVICING TO PROTECT YOUR EYES
AGAINST EXPOSURE TO THE LASER BEAM.
1-WHEN THE CABINET IS REMOVED, THE POWER IS TURNED ON WITHOUT A COMPACT DISC IN POSITION AND THE
PICKUP IS ON THE OUTER EDGE THE LASER WILL LIGHT FOR SEVERAL SECONDS TO DETECT A DISC. DO NOT
LOOK INTO THE PICKUP LENS.
2-THE LASER POWER OUTPUT OF THE PICKUP UNIT AND REPLACEMENT SERVICE PARTS ARE ALL FACTORY
PRESET BEFORE SHIPMENT.
DO NOT ATTEMPT TO READJUST THE LASER PICKUP UNIT DURING REPLACEMENT OR SERVICING.
3-UNDER NO CIRCUMSTANCES STARE INTO THE PICKUP LENS AT ANY TIME.
4-CAUTION-USE OF CONTROLS OR ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VOLTAGE SELECTION (FOR CD-CH1000W ONLY)
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows.
Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110V, 127V, 220V or 230-240V
AC).
CAUTION
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
This Audio Tower System is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is located on the rear cover.
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful to the eyes, do not 
attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
CAUTION-INVISIBLE  LASER  RADIATION  WHEN  OPEN.  DO  NOT  STARE  INTO 
BEAM  OR  VIEW  DIRECTLY  WITH  OPTICAL  INSTRUMENTS.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.  STIRRA
EJ  IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN   MED  OPTISKA  INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  VED  ABNING.  SE  IKKE  IND  I 
STRALEN-HELLER  IKKE  MED  OPTISKE  INSTRUMENTER.
VARO!  AVATTAESSA  OLET  ALTTIINA  NAKYMATON  LASERSATEILYLLE.
ALA  TUIJOTA  SATEESEEN  ALAKA  KATSO  SITA  OPTISEN  LAITTEEN  LAPI.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.
STIRRA  EJ IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN  GENOM  OPTISKT  
INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  NAR  DEKSEL  APNES.  STIRR IKKE  
INN  I  STRALEN  ELLER  SE  DIREKTE  MED  OPTISKE  INSTRUMENTER.
QACCA0003AW00
QACCE0008AW00
QACCL0005AW00
QACCB0006AW00
Figure 3 AC POWER SUPPLY CORD AND AC PLUG ADAPTOR
QPLGA0003AWZZ
QPLGA0004AWZZ
QACCZ0007AW00
Display

Sharp CD-CH1000 (serv.man12) Service Manual ▷ Download

  • DOWNLOAD Sharp CD-CH1000 (serv.man12) Service Manual ↓ Size: 224.48 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp CD-CH1000 (serv.man12) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-CH1000 (serv.man12) System. Information contained in Sharp CD-CH1000 (serv.man12) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.