Sharp CD-C611H User Manual / Operation Manual ▷ View online
<P=003>
HOW TO USE THE BUILT-IN TIMER
■
Timer playback
●
Before setting the timer, make sure that the clock setting is
correct. (Page 8)
correct. (Page 8)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND), TAPE (1
V
2) or VIDEO/AUX
button to select the desired function.
3
Press the TIMER/SLEEP button repeatedly until a green "
f
"
is displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour
start time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, and the timer set
indicator will light up.
indicator will light up.
6
When the preset time is reached, the volume will increase
gradually until it reaches the volume you were listening to
before turning off the unit.
gradually until it reaches the volume you were listening to
before turning off the unit.
7
If you select CD or TAPE during timer playback, the power
will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.
will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.
■
Timer recording
1
Press the ON/STAND-BY button to turn the power on.
●
Load a cassette for recording into the TAPE 2 cassette com-
partment.
partment.
2
Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function.
desired function.
3
Press the TIMER/SLEEP button repeatedly until a red "
f
" is
displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour start
time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, and the timer set
indicator will light up.
indicator will light up.
6
When the recording tape reaches its end, the timer recording
will end, and the power will be turned off.
will end, and the power will be turned off.
●
When timer recording starts, the volume will increase gradually
until it reaches the volume you were listening to before turning
off the unit.
until it reaches the volume you were listening to before turning
off the unit.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
●
Once the time is set, the setting will be retained until a new
time is entered.
time is entered.
■
Sleep operation
The radio, compact disc and cassette deck can all be
turned off automatically.
turned off automatically.
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until
"SLEEP" is displayed.
"SLEEP" is displayed.
To change the sleep time:
Wh i l s t t h e s l e e p ti m e i s d i s pl a ye d , p re ss th e
TUNING/TIME (
TUNING/TIME (
X
or
W
) button to adjust the time.
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during
the sleep operation.
The amount of sleep time can also be changed during
the sleep operation.
●
3 hours - 5 minutes
→
5-minute intervals
●
5 minutes - 1 minute
→
1-minute intervals
3
Press the MEMORY/SET button.
4
The unit will turn off automatically after the preset
sleep time has elapsed.
sleep time has elapsed.
Note:
●
Once the sleep time is set, it will remain the same
duration until the setting is changed.
duration until the setting is changed.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-by
mode.
mode.
(Main unit operation)
ON/
STAND-BY
CD
TUNER
(BAND)
(BAND)
TAPE
(1 2)
(1 2)
MEMORY/SET
TIMER/
SLEEP
SLEEP
TUNING/
TIME
( )
TIME
( )
3
4
5
CD-C611H(SUK) TINSE0251AWZZ
24
<P=004>
HEADPHONES
1,5
3,4
2
●
Before plugging in or unplugging the headphones, make sure
the volume level is reduced.
the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The
recommended impedance is 32 ohms.
and are between 16 ohms and 50 ohms impedance. The
recommended impedance is 32 ohms.
●
When headphones are connected, the speakers are discon-
nected automatically. Adjust the VOLUME control for the
desired volume.
nected automatically. Adjust the VOLUME control for the
desired volume.
TRANSPORTING THE UNIT
Before you move this product to a new location, proceed
as follows:
as follows:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
●
Remove all CDs inserted in the unit.
4
Press the OPEN/CLOSE button to close the disc tray.
●
Make sure that "NO DISC" is displayed.
5
Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the AC socket.
and then unplug the AC power lead from the AC socket.
TAPE 1
TAPE 2
2
1,2
RESETTING THE MICROCOMPUTER
Reset the microcomputer under the following conditions:
●
To erase all of the stored memory contents (clock and timer
settings, and tuner and CD presets).
settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the
5 / 3
button and the
2 / 4
button, hold down the ON/STAND-BY button for at least 1
second.
second.
Caution:
●
The operation explained above will erase all data stored in
memory including clock and timer settings, and tuner and CD
presets.
memory including clock and timer settings, and tuner and CD
presets.
MAINTENANCE
■
Internal care
●
Dirty heads, capstans or pinch rollers can cause poor sound
and tape jams. Clean these parts with a cotton swab mois-
tened with commercial head/pinch roller cleaner or isopropyl
alcohol.
and tape jams. Clean these parts with a cotton swab mois-
tened with commercial head/pinch roller cleaner or isopropyl
alcohol.
●
After long use, the deck’s heads and capstans may become
magnetised, causing poor sound. Demagnetise these parts
once every 30 hours of playing/recording time by using a com-
mercial tape head demagnetiser. Read the demagnetiser’s in-
structions carefully before use.
magnetised, causing poor sound. Demagnetise these parts
once every 30 hours of playing/recording time by using a com-
mercial tape head demagnetiser. Read the demagnetiser’s in-
structions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or other chemi-
cals.
cals.
CD-C611H(SUK) TINSE0251AWZZ
25
<P=005>
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
●
General
Power source:
AC 230 V, 50 Hz
Power consumption:
Stand-by; 0.6 W
Power on; 47 W
Power on; 47 W
Dimensions:
Width; 270 mm (10-5/8")
Height; 300 mm (11-13/16")
Depth; 353 mm (13-7/8")
Height; 300 mm (11-13/16")
Depth; 353 mm (13-7/8")
Weight:
5.5 kg (12.1 lbs.)
●
Amplifier section
Output power:
RMS; 40 W (20 W + 20 W)
(10 % T.H.D.)
RMS; 28 W (14 W + 14 W)
(0.9 % T.H.D.)
(10 % T.H.D.)
RMS; 28 W (14 W + 14 W)
(0.9 % T.H.D.)
Output terminals:
Front speakers; 5.4 ohms
Surround speakers; 16 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Surround speakers; 16 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
●
Compact disc player section
Type:
3-disc multi-play compact
disc player
disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
D/A converter:
1-bit D/A converter
Frequency
response:
response:
20 - 20,000 Hz
Dynamic range:
90 dB (1 kHz)
●
Tuner section
Frequency range:
FM; 87.5-108 MHz
AM; 522 - 1,620 kHz
AM; 522 - 1,620 kHz
●
Cassette deck section
Type:
Compact cassette tape
Frequency response:
50-14,000 Hz (Normal tape)
Motor:
DC motor with electronic governor
×
1
Signal/noise ratio:
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
50 dB (TAPE 2, recording/playback)
Bias and erasure system:
AC
Tape speed:
4.76 cm/sec. (1-7/8 ips.)
Wow and flutter:
0.2 % (DIN 45 511, playback)
Heads:
TAPE-1: Playback
×
1
TAPE-2: Record/playback
×
1
Erase
×
1
●
Front speaker section
Type:
2-way type [130 mm (5-1/4") woofer
and super tweeter]
and super tweeter]
Maximum input power: 30 W
Rated input power:
Rated input power:
15 W
Impedance:
5.4 ohms
Dimensions:
Width; 180 mm (7-1/8")
Height; 300 mm (11-13/16")
Depth; 215 mm (8-7/16")
Height; 300 mm (11-13/16")
Depth; 215 mm (8-7/16")
Weight:
2.0 kg (4.4 lbs.)/each
●
Surround speaker section
Type:
80 mm (3-1/4") full-range speaker
Maximum input power: 10 W
Rated input power:
Rated input power:
5 W
Impedance:
16 ohms
Dimensions:
Width; 170 mm (6-3/4")
Height; 170 mm (6-3/4")
Depth; 88 mm (3-1/2")
Height; 170 mm (6-3/4")
Depth; 88 mm (3-1/2")
Weight:
0.6 kg (1.2 lbs.)/each
CD-C611H(SUK) TINSE0251AWZZ
26
CD-C611H(SUK) TINSE0251AWZZ
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
?????.??
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of this
product subject to the conditions listed below:-
product subject to the conditions listed below:-
1.
This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults
or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than
by a Service Facility appointed by Sharp.
or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than
by a Service Facility appointed by Sharp.
2.
As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the
course of a business, trade or profession.
course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility
within one year from the date this product was purchased. Proof of purchase must be provided.
within one year from the date this product was purchased. Proof of purchase must be provided.
4.
The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batteries.
5.
In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased.
Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number given
below.
Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number given
below.
6.
No person has any authority to vary the terms or conditions of this guarantee.
7.
This guarantee is offered as an additional benefit to your statutory rights, and does not affect these rights in any
way.
way.
If you have any difficulty operating this product, or would like information on other Sharp products, please telephone the
Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
TINSE0251AWZZ
A9902.HK
