Sharp CD-C611H (serv.man6) Service Manual ▷ View online
CD-C607H/611H
– 13 –
No
ASPM,
summar
y operation
Hold do
wn the ASPM b
utton f
or 3 more second.
“ASPM”
b
links in the displa
y.
Preset CH memor
y full o
v
er?
No operate
. After displa
y
ed
“END”.
Retur
n to
pre
vious station.
SD (TUNE) DET out OK?
If count 1st OK?
If count 2nd OK?
RDS signal or not? PI—identify
Comparing PI cord same or not?
betw
een current receiving PI and
bef
ore PI which is already memor
iz
ed
b
y
ASPM on this time
.
Comparing freg.
same or not?
betw
een current receiving frequency
and (already) pre
viously memor
iz
ed
frequency
.
Memor
ized to the lo
west
v
acant preset channel.
Preset CH memor
y become full o
v
er?
Begin to ASPM SCAN from the ne
xt
CH-SP
AN again.
Repeat and contin
ue with same f
o
rmat
ASPM oper
ation untill 108 MHz.
After reached 108 MHz, displa
y
ed the
TTL quantity of memorized stations
.
And retur
n to the pre
vious receiving
freq.
automatically
.
Displa
y
ed the
TTL quantity of memo-
ri
zed stations b
y
ASPM oper
ation on
this time
. And retur
n to the pre
vious
receiving freq.
automatically
.
Ye
s
No
Ye
s
Ye
s
Ye
s
Ye
s
No
No
No
No
No
No
Eff
ect
P
ass
No eff
ect
P
ass
No eff
ect
P
ass
No eff
ect
P
ass
No eff
ect
Ye
s
No
Ye
s
Compare the field strength of current
receiving signal. Is receiving signal
stronger than signal which has same PI
cord and is already memoriz
ed to
preset memor
y ahead of this receiving
time?
Ye
s
No eff
ect
No
No eff
ect
Comparing freg.
same or not?
Betw
een current receiving frequency
and (already) pre
viously memor
iz
ed
frequency
.
Ye
s
Memor
ized to the lo
west
v
acant preset channel.
Ye
s
No eff
ect
Begin to scan star
t 87.50
→
108.00 MHz
CD-C607H/611H
– 14 –
4. No adjust type (None adjusting circuit.)
5. Added EON button.
6. Need to change RDS logo due to add EON feature.
7. Added EON—TI, EON—PTY function.
5. Added EON button.
6. Need to change RDS logo due to add EON feature.
7. Added EON—TI, EON—PTY function.
3. Summary of CD-C3H RDS—EON operation
EON—PTY:
Select and set the desired “PTY”
→
stand-by
→
switch to ON(other network) Station at the
start of desired PTY automatically
→
stay and listen to PTY of ON station
→
switch back to TN(This net)
station automatically at the end of PTY(ON) i.e. after changing to another PTY(except AF M FAIRS) or
cancelling to receive PTY of ON station midway.
cancelling to receive PTY of ON station midway.
EON—TI:
Select and set the “TI”
→
stand-by
→
switch to ON station at the start of traffic announcement automati
cally
→
stay and listen to TA of ON station
→
switch back to TN station autmatically at the end of TA(ON).
ie after TA(ON) is over or cancelled to receive TA of ON station midway.
When switching TN
→
ON station.
In case of exist 2 more stations having the desired(specified) “PTY” or “TI”, the receiver will select and switch to ON station
comparing field strength at the same time. But when the frequency of ON station exists in the preset-memory, then reciver
switches straight to that ON station(CH), without comparing field strength so can make a quick switching from TN—ON sta
tion. Preset memory takes priority of switching TN—ON station.
therefore ASPM is usefull not only for PTY search but also for rapid EON switching. Anyway CD-C607H/611H EON is basi-
comparing field strength at the same time. But when the frequency of ON station exists in the preset-memory, then reciver
switches straight to that ON station(CH), without comparing field strength so can make a quick switching from TN—ON sta
tion. Preset memory takes priority of switching TN—ON station.
therefore ASPM is usefull not only for PTY search but also for rapid EON switching. Anyway CD-C607H/611H EON is basi-
cally stand-by and receiving method, along with the Guidelines for EON implementation.
• ASPM SCAN: 87.50MHz
→
108.00 MHz.
• Only RDS signal is memorized by ASPM because RDS signal has PI code and is suitable and convenient for ASPM operation.
ASPM
Comparing field strength, only one strongest RDS station is memorized of all stations (repeater relay stations) that have same
ASPM
Comparing field strength, only one strongest RDS station is memorized of all stations (repeater relay stations) that have same
PI code.
Same PI code — freq: different
(AF’S)
PS: same
PTY: same
PTY: same
Each PI has AF’S list by individually.
Exa: P1 has f
Exa: P1 has f
1
, f
2
, f
3
(same PTY).
P2 has f
4
, f
5
(same PTY).
[For example]
Pickup and memorized to preset CH.
f 1
f 2
f 2
f 3
P 1 (PI cord)
PS 1 (Station Name)
PS 1 (Station Name)
f 5
f 4
P 2
PS 2
PS 2
f 6
f 7
f 7
f 8
P 3
PS 3
PS 3
f 9
f 10
f 11 f 12 f13
P 4
PS 4
PS 4
Select signals (f1, f5, f7, f10) are memorized in the preset memory by ASPM.
• If tentative - ASPM operation is repeated intententionally, never memorized (over write) at the same frequecy.
• If tentative - ASPM operation is repeated intententionally, never memorized (over write) at the same frequecy.
1st time ASPM
→
strongest stations of each pi are memorized.
ASPM is not only very usefull for PTY search, but also EON operation.
2nd time ASPM
2nd time ASPM
→
2nd strong stations of each pi are memorized and so on.
PTY search function is equal to FM band search function as a result.
1. Introduction of RDS for CD-C607H/611H
CD-C607H/611H RDS function is equal to adding EON feature to the current CD-C75H RDS.
EON feature is EON—PTY and EON—TI.
Although PTY and TI indicators are separated, PTY contains TI in the PTY items (software) like current PTY search items.
EON feature is EON—PTY and EON—TI.
Although PTY and TI indicators are separated, PTY contains TI in the PTY items (software) like current PTY search items.
NEWS,
AFFAIRS,
INFO,
ALARM,
TI
(TTL 17 kinds)
EON—PTY
EON—TI
Can select and stand-by
Can select and stand-by
EON—PTY and EON—TI are basically stand-by
→
receive the desired program of ON station.
2. The difference point from current CD-C75H RDS. (CD-C75H — CD-C607H/611H)
1. PTY item: added TA.TTL 18 kind.
2. Each “TP”, “TA” ind. light up or go out individually.
“TA” ind. doesn’t light up on current model, CD-C75H due to none EON—TI.
3. Added 3 indicators(in FL) due to adding EON feature.
EON: Lights up only during receiving EON data (14A).
TI:
2. Each “TP”, “TA” ind. light up or go out individually.
“TA” ind. doesn’t light up on current model, CD-C75H due to none EON—TI.
3. Added 3 indicators(in FL) due to adding EON feature.
EON: Lights up only during receiving EON data (14A).
TI:
During EON-TI stand-by
→
Light up
During receiving ON station.
→
blink.
PTY: During EON-PTY stanb-by
→
Light up
During receiving ON station.
→
blink.
---
---
↑
↑
CD-C607H/611H
– 15 –
EON summary notice for reference
1. EON-TI/PTY
EON stand-by can be set, only when EON ind. lights up.
While EON ind. goes out (NO EON STATION), EON stand-by can't be set.
If the EON button is pressed, then “NO EON” is indication the display.
While EON ind. goes out (NO EON STATION), EON stand-by can't be set.
If the EON button is pressed, then “NO EON” is indication the display.
2. EON-TI/PTY
Even if switch back ON
→
TN station continue to keep EON stand-by.
3. EON-TI
Don’t switch TN
→
ON during TN broadcast TA. (same item)
4. EON-TI/PTY
EON can be cancelled during receiving ON station by pressing EON button if necessary and
switch back ON
switch back ON
→
TN.
5. EON-TI/PTY
EON stand-by is perfectly cancelled (cleared) by pressing EON button 2 times during stand-by or
powerOFF or Tun Up/Down or change band or recall pre-set CH.
powerOFF or Tun Up/Down or change band or recall pre-set CH.
6. EON-TI/PTY
After setting EON stand-by, stand-by items can be confirmed by pressing EON button one time.
7. EON-TI/PTY
EON button function: • EON setting
• Confirm stand-by items
• Cancel (ON
• Cancel (ON
→
TN)
• EON clear cancel (2 times)
8. EON-TI/PTY
After setting EON-TI and EON-PTY stand-by, if when EON data is not transmitted, EON ind goes out
and EON stand-by is automatically cancelled display “NO EON”.
and EON stand-by is automatically cancelled display “NO EON”.
9. EON-TI
EON-TI stand-by can't be set. When TP=0,TA=0(TN) even if EON ind. lights up and the EON button is
pressed then “NO TI” is indication the display.
pressed then “NO TI” is indication the display.
10. EON-PTY
Don’t switch TN
→
ON during TN broadcast same specified PTY. (same item of PTY)
11. EON-TI/PTY
Switch TN
→
ON
→
TN station one cycle.
Never switch TN
→
ON1
→
ON2
→
Other net to other net station.
12. EON-TI/PTY
After switch TN
→
ON station. When ON station is NO RDS, NO signal, TA=OFF or different PTY items.
The receiver switch back ON
→
TN displaying “NO READY”.
13.
During receive ON station. when ON station become to be NO RDS, NO signal, TA=ON to OFF or
different PTY item, The receiver switch back ON
different PTY item, The receiver switch back ON
→
TN.
14. EON-TI/PTY
Switch TN
→
ON in case of 2 more stations exist, comparing field strength and switch to the strongest
station, if these signals are same strength, switch to the first previous station.
If same frequency as AF'Sexists in the preset memory, then switch TN
If same frequency as AF'Sexists in the preset memory, then switch TN
→
ON (preset memory station)
straight.
In case of exist 2 more preset memories of AF’S,then switch to the preset CH which taken in EON DATA
first, also in this case no concern to field strength.
In case of exist 2 more preset memories of AF’S,then switch to the preset CH which taken in EON DATA
first, also in this case no concern to field strength.
15.
Even if switch TN
→
ON preset memory straight, that ON station is very weak signal, then search another
AF'S (ON) station comparing field strength and switch to the strongest station as a result. Of all atations
of AF'S are very weak or no good condition, then, switch back ON
of AF'S are very weak or no good condition, then, switch back ON
→
TN automatically display "NO
READY".
16. EON-TI/PTY
No linkage volume, power ON/OFF, and switch function.
Traffic Programme code
(TP)
Traffic Announcement code
(TA)
Applications
OFF
OFF
This programme does not carry traffic announcements nor does
it refer, via EON, to a programme that does.
it refer, via EON, to a programme that does.
OFF
ON
This programmecarries EON information about another
programme which gives traffic information.
programme which gives traffic information.
ON
OFF
This programme carries traffic announcements but none are
being broadcast at present and may also carry EON information
about other traffic announcements.
being broadcast at present and may also carry EON information
about other traffic announcements.
ON
ON
A traffic announcement is being broadcast on this programme at
present.
present.
CD-C607H/611H
– 16 –
•
The indicated voltage in each section is the one measured
by Digital Multimeter between such a section and the chas-
sis with no signal given.
1. In the tuner section,
sis with no signal given.
1. In the tuner section,
( ) indicates AM
< > indicates FM stereo
< > indicates FM stereo
2. In the main section, a tape is being played back.
3. In the deck section, a tape is being played back.
3. In the deck section, a tape is being played back.
( ) indicates the record state.
4. In the power section, a tape is being played back.
5. In the CD section, the CD is stopped.
5. In the CD section, the CD is stopped.
•
Parts marked with “ ” ( ) are important for
maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and
performance of the set.
parts with specified ones for maintaining the safety and
performance of the set.
NOTES ON SCHEMATIC DIAGRAM
•
Resistor:
To differentiate the units of resistors, such symbol as K and
M are used: the symbol K means 1000 ohm and the symbol
M means 1000 kohm and the resistor without any symbol is
ohm-type resistor. Besides, the one with “Fusible” is a fuse
type.
M are used: the symbol K means 1000 ohm and the symbol
M means 1000 kohm and the resistor without any symbol is
ohm-type resistor. Besides, the one with “Fusible” is a fuse
type.
•
Capacitor:
To indicate the unit of capacitor, a symbol P is used: this
symbol P means micro-micro-farad and the unit of the
capacitor without such a symbol is microfarad. As to
electrolytic capacitor, the expression “capacitance/withstand
voltage” is used.
(CH), (TH), (RH), (UJ): Temperature compensation
(ML): Mylar type
(P.P.): Polypropylene type
symbol P means micro-micro-farad and the unit of the
capacitor without such a symbol is microfarad. As to
electrolytic capacitor, the expression “capacitance/withstand
voltage” is used.
(CH), (TH), (RH), (UJ): Temperature compensation
(ML): Mylar type
(P.P.): Polypropylene type
•
Schematic diagram and Wiring Side of P.W.Board for this
model are subject to change for improvement without prior
notice.
notice.
Figure 16 TYPES OF TRANSISTOR AND LED
SW1
OPEN/CLOSE
ON—OFF
SW2
MECHA UP
ON—OFF
SW3
DISC NUMBER
ON—OFF
SW4
PICKUP IN
ON—OFF
SW701
ON/STAND-BY
ON—OFF
SW702
DISPLAY MODE
ON—OFF
SW703
CLOCK
ON—OFF
SW704
TIMER/SLEEP
ON—OFF
SW706
DISK SKIP
ON—OFF
SW707
OPEN/CLOSE
ON—OFF
SW710
FAST FORWARD
ON—OFF
SW711
REC PAUSE
ON—OFF
SW712
MEMORY/SET
ON—OFF
SW713
STOP
ON—OFF
SW714
TUNER (BAND)
ON—OFF
SW715
TAPE
ON—OFF
REF. NO
DESCRIPTION
POSITION
POSITION
SW716
CD
ON—OFF
SW717
PTY.TI SEARCH
ON—OFF
SW718
EON
ON—OFF
SW719
ASPM
ON—OFF
SW720
STATION
ON—OFF
SW722
REWIND
ON—OFF
SW723
TUNING UP
ON—OFF
SW724
TUNING DOWN
ON—OFF
SW725
PLAY
ON—OFF
SW726
VOLUME DOWN
ON—OFF
SW727
VOLUME UP
ON—OFF
SW728
X-BASS/DEMO
ON—OFF
SWM3
FOOI PROOF
ON—OFF
SWM4
F.A.S.
ON—OFF
SWM5
CAM
ON—OFF
REF. NO
DESCRIPTION
SVC348S
2SC2389 SE
2SC380 O
KRC102 M
KRC104 M
KRC107 M
KTA1266 GR
KTA1271 Y
KTA1273 Y
KTC3199 GR
KTC3203 Y
2SC380 O
KRC102 M
KRC104 M
KRC107 M
KTA1266 GR
KTA1271 Y
KTA1273 Y
KTC3199 GR
KTC3203 Y
FRONT
VIEW
E C B
(S)(G)(D)
(1) (2) (3)
(1) (2) (3)
2SA1318
FRONT
VIEW
B C E
(D)(G)(S)
(3) (2) (1)
(3) (2) (1)
1 2 3
SLI342UCJ1
VIEW
FRONT
Click on the first or last page to see other CD-C611H (serv.man6) service manuals if exist.