Sharp CD-BA250 (serv.man2) User Manual / Operation Manual ▷ View online
– 1 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
This Quick Guide will help you to correctly
install and operate your system.
install and operate your system.
CD-BA250H
MINI COMPONENT SYSTEM
If you require any advice or assistance re-
garding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone 08705 274277 during office
hours (or (01) 676 0648 if telephoning from
Ireland).
garding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone 08705 274277 during office
hours (or (01) 676 0648 if telephoning from
Ireland).
Accessories
1
2
3
Battery installation of remote control
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Remove the
Insert the batteries
Replace the cover.
battery cover.
as shown.
1
1
2
2
TINSE0373AWZZ
A0102.HK
FM aerial
×
1
Remote control
×
1
AM loop aerial
×
1
*CDBA250E_QG
01.2.8, 6:19 PM
1
– 2 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
System connections
3
3
AM loop aerial
FM aerial
Red
Black
Right speaker
Left speaker
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
Right speaker
Left speaker
RCA lead
(not supplied)
(not supplied)
To the line
output sockets
output sockets
VCR, DVD, etc.
TV
*CDBA250E_QG
01.2.8, 6:19 PM
2
– 3 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Turn on your system
4
4
1
2
The first time the unit is plugged,
the unit will enter the demonstra-
tion mode. You will see words
scroll.
the unit will enter the demonstra-
tion mode. You will see words
scroll.
Press the
X-BASS/DEMO button
to cancel the demon-
stration mode.
X-BASS/DEMO button
to cancel the demon-
stration mode.
Press the ON/
STAND-BY button to
turn the power on.
STAND-BY button to
turn the power on.
1
Press the CD button.
2
Press the
7
7
7
7
7
OPEN/CLOSE button to
open the disc tray.
3
Place the CD(s) on the disc tray, label
side up.
When loading a third disc, press the
DISC SKIP button to turn the disc tray,
then place the CD in the open position.
side up.
When loading a third disc, press the
DISC SKIP button to turn the disc tray,
then place the CD in the open position.
4
Press the
7
7
7
7
7
OPEN/CLOSE button to
close the disc tray.
5
To select the CD you want to listen to
first, press one of
first, press one of
s
s
s
s
s
1 -
s
s
s
s
s
3 buttons on
the remote control.
6
Press the
0 / R
0 / R
0 / R
0 / R
0 / R
button to start playback.
12 cm (5”)
8 cm (3”)
Listening to a CD (CDs)
FM stereo mode indicator
FM stereo receiving indicator
1
Press the TUNER (BAND) button repeat-
edly to select the desired frequency
band (FM or AM).
edly to select the desired frequency
band (FM or AM).
2
Press the TUNING/TIME (
X
X
X
X
X
or
W
W
W
W
W
) but-
ton to tune in to the desired station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner
will stop at the first receivable broadcast
station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner
will stop at the first receivable broadcast
station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST” indicator.
Press the TUNER (BAND) button to display the
“ST” indicator.
●
“
j
j
j
j
j
” will appear when an FM broadcast is in ste-
reo.
Listening to the radio
*CDBA250E_QG
01.2.8, 6:20 PM
3
– 4 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
■
If trouble occurs
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the follow-
ing:
¡
Press the ON/STAND-BY button to enter the power
stand-by mode.
stand-by mode.
™
Whilst pressing down the
0 /
R
button and the X-BASS/
DEMO button, press the ON/STAND-BY button until
“CLEAR AL” appears.
“CLEAR AL” appears.
■
Maintenance
●
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
unit which contains high voltages.
●
●
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
mercial cleaning disc (brush type).
1
Open the cassette door by pushing the
area marked “
area marked “
7
7
7
7
7
PUSH EJECT”.
2
Load a cassette into the TAPE 1 or TAPE
2 cassette compartment with the side to
be played facing toward you.
2 cassette compartment with the side to
be played facing toward you.
3
Press the TAPE (1
V
V
V
V
V
2) button to select
the cassette you want to listen to.
4
Press the
0 / R
0 / R
0 / R
0 / R
0 / R
button to start playback.
TAPE 1
TAPE 2
Listening to a cassette tape (TAPE 1 or TAPE 2)
TAPE 1
TAPE 2
A
C
C
D
E
B
B
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
*CDBA250E_QG
01.2.8, 6:20 PM
4
Display