DOWNLOAD Sharp CD-BA250 (serv.man11) Service Manual ↓ Size: 42.8 KB | Pages: 1 in PDF or view online for FREE

Model
CD-BA250 (serv.man11)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
42.8 KB
Type
PDF
Document
Service Manual / Specification
Brand
Device
Audio / System / CDBA250H and CDBA2600H
File
cd-ba250-sm11.pdf
Date

Sharp CD-BA250 (serv.man11) Service Manual / Specification ▷ View online

– 3 –
CD-BA250H/CD-BA2600H
General
 
Amplifier (Except for U.K.)
 
CD player
Tuner
 
Cassette deck (Except for U.K.)
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 124 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 270 mm (10-5/8") 
Height: 330 mm (13") 
Depth: 340 mm (13-3/8")
Weight
6.7 kg (14.7 lbs.)
 ( * )
This power consumption value is obtained when the demonstration mode is 
cancelled in the power stand-by mode. cancel the demonstration mode.
Output power
PMPO: 480 W
MPO: 240 W (120 W + 120 W) (DIN 45 324)
RMS: 150 W (75 W + 75 W) (DIN 45 324)
RMS: 104 W (52 W + 52 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
Type
3-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Frequency response
50 - 14,000 Hz (Normal tape)
Signal/noise ratio
Wow and flutter
0.35 % (DIN 45 511)
Type
 
5 cm (2") Tweeter
13 cm (5-1/4") Woofer
Maximum input power
150 W
Rated input power
75 W
Impedance
6 ohms
Dimensions
Width: 220 mm (8-11/16") 
Height: 330 mm (13") 
Depth: 217 mm (8-9/16")
Weight
3.0 kg (6.6 lbs.)/each
Amplifier (CD-BA250H for U.K.)
Cassette deck (CD-BA250H for U.K.)
Output power
RMS: 150 W (75 W + 75 W) (10 % T.H.D.)
RMS: 104 W (52 W + 52 W) (0.9 % T.H.D.)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
Frequency response
50 - 14,000 Hz (Normal tape)
Signal/noise ratio
Wow and flutter
0.3 % (WRMS)
SPECIFICATIONS
CD-BA250H/CD-BA2600H
IMPORTANT SERVICE NOTES (CD-BA250H FOR U.K. ONLY)
Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
SHORT-CIRCUIT
AC POWER 
SUPPLY CORD
CONNECT THE PROBE
TO GND 
OF CHASSIS
SCREW
 PROBE
AC
UNIT
WITHSTANDING
VOLTAGE TESTER
+
-
OUT
CHASSIS SCREW
CP-BA250H/CP-BA2600H
Display

Sharp CD-BA250 (serv.man11) Service Manual / Specification ▷ Download

  • DOWNLOAD Sharp CD-BA250 (serv.man11) Service Manual ↓ Size: 42.8 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Specification for the Sharp CD-BA250 (serv.man11) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-BA250 (serv.man11) System. Information contained in Sharp CD-BA250 (serv.man11) Service Manual / Specification (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.