DOWNLOAD Sharp CD-BA2010 (serv.man13) Service Manual ↓ Size: 2.02 MB | Pages: 4 in PDF or view online for FREE

Model
CD-BA2010 (serv.man13)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
2.02 MB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Audio / System / 3 CD changer servicing guidelines
File
cd-ba2010-sm13.pdf
Date
PREV: Sharp CD-BA2010 (serv.man12) Service Manual / Technical Bulletin

Sharp CD-BA2010 (serv.man13) Service Manual / Technical Bulletin ▷ View online

AUD2001 11 04
Month of Issue:   November 2001
        
Classification: 
White
AUDIO TECHNICAL BULLETIN 
Page 1 of 4
Sharp Electronics (UK) Limited
Reference AVW16112001-1
Revision  1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
MODELS
CDBA1600H
CDBA1700H
CDBA2000H
CDBA2010H
REASON
When servicing the three-CD changer on any of the above models, please follow the
guidelines given on the following pages.
Removing Slide Holder from Chassis
1.  Lift-up Lock Lever to unlock the Slide 
holder.
2.  At the same time, pull the Cam Gear 
as shown while pushing  forward the 
slide holder.
3.   Remove the lock lever from the chassis.
4.  Pull back the slide holder to the 
previous position
5.   Slowly lift-up the slide holder to 
separate it from the chassis.
Reassemble Slide Holder to Chassis
1.   Lift the stop lever to outside of slide 
holder and hold to the position.
2.   Slowly place the slide holder to the 
chassis.
3.   Ensure that slide holder slots ( 4 
positions) is aligned to the chassis 
mounting.
4.   Slowly push down the slide holder to 
the chassis mountings.
5.  Firmly push the turn-table with two 
finger while other hand pressing down 
the slide holder.
6.  Hold the cam gear as shown position 
while push forward the slide holder.
7.   Push the slide holder forward until 
lock lever assembly location expose.
8.    Fixed back the lock lever with spring 
and screw.  Finally the 3 CD Changer is 
ready to be fixed to the unit.
Display

Sharp CD-BA2010 (serv.man13) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp CD-BA2010 (serv.man13) Service Manual ↓ Size: 2.02 MB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp CD-BA2010 (serv.man13) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-BA2010 (serv.man13) System. Information contained in Sharp CD-BA2010 (serv.man13) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

CD-BA2010 (serv.man13) Service Manuals

Preview DownloadPagesSize
CD-BA2010 (serv.man3) Video clip detailing how to re-install the 3 CD changer mechanism Service Manual 4.04 MB
CD-BA2010 (serv.man4) Part 1 - text Service Manual 18 1 MB
CD-BA2010 (serv.man5) Part 2 - Notes on diagrams, Block diagrams Service Manual 5 440.13 KB
CD-BA2010 (serv.man6) Part 3 - Printed wiring board assemblies Service Manual 8 982.22 KB
CD-BA2010 (serv.man7) Part 4 - Schematic diagrams Service Manual 11 1000.45 KB
CD-BA2010 (serv.man8) Part 5 - Voltage table, Troubleshooting tables, IC tables Service Manual 12 433.74 KB
CD-BA2010 (serv.man9) Including circuit diagrams Service Manual 68 4.18 MB
CD-BA2010 part (from the ) User Manual / Operation Manual 1 63.09 KB
CD-BA2010 (serv.man2) Service Manual / Parts Guide 14 415.31 KB
CD-BA2010 (serv.man10) Service Manual / Specification 1 27.54 KB
CD-BA2010 (serv.man23) Correction to printing error in (Belt). Service Manual / Technical Bulletin 1 66.4 KB
CD-BA2010 (serv.man22) Popping noise heard through headphones when power turned off. Service Manual / Technical Bulletin 2 107.71 KB
CD-BA2010 (serv.man21) Part setting for separate items in cassette mechansim. Service Manual / Technical Bulletin 1 69.32 KB
CD-BA2010 (serv.man20) Fly wheels assigned as service parts. Service Manual / Technical Bulletin 1 66.95 KB
CD-BA2010 (serv.man19) Failure of output IC902 Service Manual / Technical Bulletin 1 11.66 KB
CD-BA2010 (serv.man18) TAPE ERRappears on the display Service Manual / Technical Bulletin 1 49.74 KB
CD-BA2010 (serv.man17) Correction to (connection of R215 and R216 in diagrams) Service Manual / Technical Bulletin 2 96.28 KB
CD-BA2010 (serv.man16) Addition of screws to CD player to prevent seizure Service Manual / Technical Bulletin 2 88.18 KB
CD-BA2010 (serv.man15) Parts assigned as service parts Service Manual / Technical Bulletin 1 41.4 KB
CD-BA2010 (serv.man14) Tape errors appear on the display due to various reasons Service Manual / Technical Bulletin 3 179.63 KB
CD-BA2010 (serv.man12) PROTECTappears on the display when operating at high output power conditions Service Manual / Technical Bulletin 1 9.47 KB
CD-BA2010 (serv.man11) Tape deck Service Manual / Technical Bulletin 2 25.51 KB

RANDOM: