Sharp CD-BA160 (serv.man12) Service Manual / Technical Bulletin ▷ View online
Reassemble Slide Holder to Chassis
1. Lift the stop lever to outside of slide
holder and hold to the position.
holder and hold to the position.
2. Slowly place the slide holder to the
chassis.
chassis.
3. Ensure that slide holder slots ( 4
positions) is aligned to the chassis
mounting.
positions) is aligned to the chassis
mounting.
4. Slowly push down the slide holder to
the chassis mountings.
the chassis mountings.
5. Firmly push the turn-table with two
finger while other hand pressing down
the slide holder.
finger while other hand pressing down
the slide holder.
6. Hold the cam gear as shown position
while push forward the slide holder.
while push forward the slide holder.
7. Push the slide holder forward until
lock lever assembly location expose.
lock lever assembly location expose.
8. Fixed back the lock lever with spring
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
7. Push the slide holder forward until
lock lever assembly location expose.
lock lever assembly location expose.
8. Fixed back the lock lever with spring
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
7. Push the slide holder forward until
lock lever assembly location expose.
lock lever assembly location expose.
8. Fixed back the lock lever with spring
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
and screw. Finally the 3 CD Changer is
ready to be fixed to the unit.
Display