DOWNLOAD Sharp AY-X10 (serv.man9) Service Manual ↓ Size: 17.3 KB | Pages: 2 in PDF or view online for FREE

Model
AY-X10 (serv.man9)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
17.3 KB
Type
PDF
Document
Service Manual
Brand
Device
Air Conditioner / Function and operation of protective procedures
File
ay-x10-sm9.pdf
Date

Sharp AY-X10 (serv.man9) Service Manual ▷ View online

26
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
Function
NO
Description
Detection 
time
Restart 
condition
Restart 
times
Indoor Outdoor
Operation
Self diagnostic
display
8
9
10
11
12
13
14
15
16
Outdoor heat 
exchanger
overheating 
control
Outdoor 
thermistor 
short
Outdoor 
thermistor 
open
AC abnormal 
current error
Serial signal 
error
Power factor 
module
(Active filter) 
error
Rotation error
of the 
compressor
Open circuit 
of the power 
module (IPM) 
heat-sink 
thermistor
Overheat of 
the power 
module (IPM) 
or short 
circuit of the 
power 
module (IPM) 
heat-sink 
thermistor
Lowers the operating frequency if the 
temperature of the outdoor heat exchanger 
rises above 55
°
C during cooling. Stops the 
compressor if the temperature stays above 
55
°
C for 1 minute at minumum frequency.
Stops the compressor if an outdoor 
thermistor (excluding TH1) shorts.
Stops the compressor if the circuit of an 
outdoor thermistor breaks.
Stops the compressor if if the operating 
frequency is above 50 Hz and the 
compressor current is below 1.0 A.
Turns the compressor relay off if the indoor 
unit does not receive a serial signal from 
the outdoor unit for 8 minutes.
Stops the compressor if the outdoor unit 
does not receive a serial signal from the 
indoor unit for 30 seconds.
When an power factor module error input 
is detected.
When abnormalities occur to a position 
detected signal.
Stops the compressor if the circuit of the 
heat-sink thermistor.
Stops the compressor if the temperature of 
the power module is (IPM) is exceeds 
90˚C. Also stops the compressor if the 
heat-sink thermistor shorts.
During 
compressor 
operation
When 
compressor is 
activated
When 
compressor is 
activated
During 
compressor 
operation
During 
operation
During 
operation
During 
compressor 
operation
Under feedback 
operation of 
compressor 
operation
When 
compressor is 
activated
During 
compressor 
operation
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts after safety 
time  (170  seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts less than 8 
minutes after 
operation stops
Restarts after 
reception of serial 
signal
Automatically 
restarts after safety 
time  (170 seconds)
Automatically restart 
after safety time 
(170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
No limit
4 times
4 times
4 times
No limit
No limit
4 times
8 times
4 times
4 times
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
26
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
Function
NO
Description
Detection 
time
Restart 
condition
Restart 
times
Indoor Outdoor
Operation
Self diagnostic
display
8
9
10
11
12
13
14
15
16
Outdoor heat 
exchanger
overheating 
control
Outdoor 
thermistor 
short
Outdoor 
thermistor 
open
AC abnormal 
current error
Serial signal 
error
Power factor 
module
(Active filter) 
error
Rotation error
of the 
compressor
Open circuit 
of the power 
module (IPM) 
heat-sink 
thermistor
Overheat of 
the power 
module (IPM) 
or short 
circuit of the 
power 
module (IPM) 
heat-sink 
thermistor
Lowers the operating frequency if the 
temperature of the outdoor heat exchanger 
rises above 55
°
C during cooling. Stops the 
compressor if the temperature stays above 
55
°
C for 1 minute at minumum frequency.
Stops the compressor if an outdoor 
thermistor (excluding TH1) shorts.
Stops the compressor if the circuit of an 
outdoor thermistor breaks.
Stops the compressor if if the operating 
frequency is above 50 Hz and the 
compressor current is below 1.0 A.
Turns the compressor relay off if the indoor 
unit does not receive a serial signal from 
the outdoor unit for 8 minutes.
Stops the compressor if the outdoor unit 
does not receive a serial signal from the 
indoor unit for 30 seconds.
When an power factor module error input 
is detected.
When abnormalities occur to a position 
detected signal.
Stops the compressor if the circuit of the 
heat-sink thermistor.
Stops the compressor if the temperature of 
the power module is (IPM) is exceeds 
90˚C. Also stops the compressor if the 
heat-sink thermistor shorts.
During 
compressor 
operation
When 
compressor is 
activated
When 
compressor is 
activated
During 
compressor 
operation
During 
operation
During 
operation
During 
compressor 
operation
Under feedback 
operation of 
compressor 
operation
When 
compressor is 
activated
During 
compressor 
operation
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts after safety 
time  (170  seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts less than 8 
minutes after 
operation stops
Restarts after 
reception of serial 
signal
Automatically 
restarts after safety 
time  (170 seconds)
Automatically restart 
after safety time 
(170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
No limit
4 times
4 times
4 times
No limit
No limit
4 times
8 times
4 times
4 times
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
26
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
Function
NO
Description
Detection 
time
Restart 
condition
Restart 
times
Indoor Outdoor
Operation
Self diagnostic
display
8
9
10
11
12
13
14
15
16
Outdoor heat 
exchanger
overheating 
control
Outdoor 
thermistor 
short
Outdoor 
thermistor 
open
AC abnormal 
current error
Serial signal 
error
Power factor 
module
(Active filter) 
error
Rotation error
of the 
compressor
Open circuit 
of the power 
module (IPM) 
heat-sink 
thermistor
Overheat of 
the power 
module (IPM) 
or short 
circuit of the 
power 
module (IPM) 
heat-sink 
thermistor
Lowers the operating frequency if the 
temperature of the outdoor heat exchanger 
rises above 55
°
C during cooling. Stops the 
compressor if the temperature stays above 
55
°
C for 1 minute at minumum frequency.
Stops the compressor if an outdoor 
thermistor (excluding TH1) shorts.
Stops the compressor if the circuit of an 
outdoor thermistor breaks.
Stops the compressor if if the operating 
frequency is above 50 Hz and the 
compressor current is below 1.0 A.
Turns the compressor relay off if the indoor 
unit does not receive a serial signal from 
the outdoor unit for 8 minutes.
Stops the compressor if the outdoor unit 
does not receive a serial signal from the 
indoor unit for 30 seconds.
When an power factor module error input 
is detected.
When abnormalities occur to a position 
detected signal.
Stops the compressor if the circuit of the 
heat-sink thermistor.
Stops the compressor if the temperature of 
the power module is (IPM) is exceeds 
90˚C. Also stops the compressor if the 
heat-sink thermistor shorts.
During 
compressor 
operation
When 
compressor is 
activated
When 
compressor is 
activated
During 
compressor 
operation
During 
operation
During 
operation
During 
compressor 
operation
Under feedback 
operation of 
compressor 
operation
When 
compressor is 
activated
During 
compressor 
operation
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts after safety 
time  (170  seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts less than 8 
minutes after 
operation stops
Restarts after 
reception of serial 
signal
Automatically 
restarts after safety 
time  (170 seconds)
Automatically restart 
after safety time 
(170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
No limit
4 times
4 times
4 times
No limit
No limit
4 times
8 times
4 times
4 times
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
26
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
Function
NO
Description
Detection 
time
Restart 
condition
Restart 
times
Indoor Outdoor
Operation
Self diagnostic
display
8
9
10
11
12
13
14
15
16
Outdoor heat 
exchanger
overheating 
control
Outdoor 
thermistor 
short
Outdoor 
thermistor 
open
AC abnormal 
current error
Serial signal 
error
Power factor 
module
(Active filter) 
error
Rotation error
of the 
compressor
Open circuit 
of the power 
module (IPM) 
heat-sink 
thermistor
Overheat of 
the power 
module (IPM) 
or short 
circuit of the 
power 
module (IPM) 
heat-sink 
thermistor
Lowers the operating frequency if the 
temperature of the outdoor heat exchanger 
rises above 55
°
C during cooling. Stops the 
compressor if the temperature stays above 
55
°
C for 1 minute at minumum frequency.
Stops the compressor if an outdoor 
thermistor (excluding TH1) shorts.
Stops the compressor if the circuit of an 
outdoor thermistor breaks.
Stops the compressor if if the operating 
frequency is above 50 Hz and the 
compressor current is below 1.0 A.
Turns the compressor relay off if the indoor 
unit does not receive a serial signal from 
the outdoor unit for 8 minutes.
Stops the compressor if the outdoor unit 
does not receive a serial signal from the 
indoor unit for 30 seconds.
When an power factor module error input 
is detected.
When abnormalities occur to a position 
detected signal.
Stops the compressor if the circuit of the 
heat-sink thermistor.
Stops the compressor if the temperature of 
the power module is (IPM) is exceeds 
90˚C. Also stops the compressor if the 
heat-sink thermistor shorts.
During 
compressor 
operation
When 
compressor is 
activated
When 
compressor is 
activated
During 
compressor 
operation
During 
operation
During 
operation
During 
compressor 
operation
Under feedback 
operation of 
compressor 
operation
When 
compressor is 
activated
During 
compressor 
operation
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts after safety 
time  (170  seconds)
Automatically 
restarts after safety 
time  (170 seconds)
Automatically 
restarts less than 8 
minutes after 
operation stops
Restarts after 
reception of serial 
signal
Automatically 
restarts after safety 
time  (170 seconds)
Automatically restart 
after safety time 
(170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
Automatically 
restarts after safety 
time (170 seconds)
No limit
4 times
4 times
4 times
No limit
No limit
4 times
8 times
4 times
4 times
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Display

Sharp AY-X10 (serv.man9) Service Manual ▷ Download

  • DOWNLOAD Sharp AY-X10 (serv.man9) Service Manual ↓ Size: 17.3 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AY-X10 (serv.man9) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AY-X10 (serv.man9) Air Conditioner. Information contained in Sharp AY-X10 (serv.man9) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.