Sharp AY-AP24 (serv.man11) Service Manual ▷ View online
AY-AP18CS
AY-AP24CS
AE-A18CS
AE-A24CS
AY-AP24CS
AE-A18CS
AE-A24CS
32
The LOUVER FRAME UNIT and related
1.
1.
Remove the screw fixing the FRAME GUIDE on
both side and take off the LOUVER UNIT.
2.
Remove 2 screws fixing Cover-L and Cover-R
and take off them.
33
AY-AP18CS
AY-AP24CS
AE-A18CS
AE-A24CS
AY-AP24CS
AE-A18CS
AE-A24CS
1
2
3.
Remove the connector of Louver motor and take
off the Wire and Holder.
off the Wire and Holder.
4.
Push the one of the Vertical louver.
How to remove the DISPLY COVER.
1
Push the center of the Front panel under
the Display cover.
the Display cover.
2
Slide it to one side.
How to remove the Hi Voltage UNIT.
1.
Remove 2 screws fixing Holder.
2.
Take off the HIGH VOLTAGE UNIT ASS’Y from
the HOLDER
the HOLDER
3.
Remove the connector of HIGH VOLTAGE UNIT
ASS’Y
ASS’Y
AY-AP18CS
AY-AP24CS
AE-A18CS
AE-A24CS
AY-AP24CS
AE-A18CS
AE-A24CS
34
FOR OUTDOOR UNIT MODEL AE-A18CS / AE-A24CS
DISASSEMBLING PROCEDURE OF THE CONTROL BOX
1.
Loose 3 screws fixing the control cover.
2.
Loose 1 screw fixing the side cover.
3.
Loose 8 screws fixing the side cover R.
4.
Loose 2 screws fixing the cabinet (left side).
5.
Loose 1 screw fixing the cabinet (rear side).
6.
Loose 3 screw fixing the cabinet (right side).
7.
Loose 1 screw fixing the cabinet (front side).
8.
Loose 7 screws fixing the rear cabinet.
35
AY-AP18CS
AY-AP24CS
AE-A18CS
AE-A24CS
AY-AP24CS
AE-A18CS
AE-A24CS
9.
Loose 1 screw fixing the rear cabinet (left side).
10.
Cut nylon band.
11.
Loose 1 screw fixing the control box.
12.
Remove the terminal cover.
13.
Remove 3 terminals.
14.
Loose 3 screws fixing the bulkhead.
Click on the first or last page to see other AY-AP24 (serv.man11) service manuals if exist.