Sharp AE-A18 (serv.man11) Service Manual ▷ View online
43
AH/AY-AP18DR
AH/AY-AP24DR
AH/AY-AP24DR
3.
Remove the connector of Louver motor and take
off the Wire and Holder.
off the Wire and Holder.
4.
Push the one of the Vertical louver.
How to remove the DISPLY COVER.
1
Push the center of the Front panel under
the Display cover.
the Display cover.
2
Slide it to one side.
How to remove the Hi Voltage UNIT.
1.
Remove 2 screws fixing Holder.
2.
Take off the HIGH VOLTAGE UNIT ASS’Y from
the HOLDER
the HOLDER
3.
Remove the connector of HIGH VOLTAGE UNIT
ASS’Y
ASS’Y
1
2
AH/AY-AP18DR
AH/AY-AP24DR
AH/AY-AP24DR
44
FOR OUTDOOR UNIT MODEL AE-A18DR/AE-A24DR
DISASSEMBLING PROCEDURE OF THE CONTROL BOX
1.
Loose 3 screws fixing the control cover.
2.
Loose 1 screw fixing the side cover.
3.
Loose 8 screws fixing the side cover R.
4.
Loose 2 screws fixing the cabinet (left side).
5.
Loose 1 screw fixing the cabinet (rear side).
6.
Loose 3 screw fixing the cabinet (right side).
7.
Loose 1 screw fixing the cabinet (front side).
8.
Loose 7 screws fixing the rear cabinet.
45
AH/AY-AP18DR
AH/AY-AP24DR
AH/AY-AP24DR
9.
Loose 1 screw fixing the rear cabinet (left side).
10.
Cut nylon band.
11.
Loose 1 screw fixing the control box.
12.
Remove the terminal cover.
13.
Remove 3 terminals.
14.
Loose 3 screws fixing the bulkhead.
DISASSEMBLING PROCEDURE OF THE FAN
1.
Loose the fan nut and fan can take out.
2.
Loose 2 screw fixing the fan motor angle
3.
Cut the nylon band and loose 4 screws fixing the
fan motor.
fan motor.
45
AH/AY-AP18DR
AH/AY-AP24DR
AH/AY-AP24DR
9.
Loose 1 screw fixing the rear cabinet (left side).
10.
Cut nylon band.
11.
Loose 1 screw fixing the control box.
12.
Remove the terminal cover.
13.
Remove 3 terminals.
14.
Loose 3 screws fixing the bulkhead.
DISASSEMBLING PROCEDURE OF THE FAN
1.
Loose the fan nut and fan can take out.
2.
Loose 2 screw fixing the fan motor angle
3.
Cut the nylon band and loose 4 screws fixing the
fan motor.
fan motor.