Panasonic TX-LR37S25 Service Manual ▷ View online
TX-LR37S25
13
6.2.
Power LED Blinking timing chart
1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
6.3.
No Power
First check point
There are following 2 states of No Power indication by power LED.
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
Blinking times
Contents
1
Inverter_SOS
2
FAN_SOS
3
SOS
4
SUB 12V_SENSE_SOS
7
Sub_ 3.3V_SENSE_SOS
9
SOUND_SOS
12
BE)Sld)_SOS
13
Emergency SOS
TX-LR37S25
14
7 Disassembly and Assembly Instructions
7.1.
AC Cord Dressing
TREATMENT AC CORD.
TX-LR37S25
15
7.2.
AC Cord Installation
1. Put on the AC CORD BRACKET on the CABINET.
2. Fix the AC CORD BRACKET with SCREW.
3. Insert AC CORD connector into P-PCB connector.
4. Clamp the AC CORD.
5. Insert AC CORD bushing into the AC CORD BRACKET.
6. AC CORD is pushed into the bottom of the bracket.
2. Fix the AC CORD BRACKET with SCREW.
3. Insert AC CORD connector into P-PCB connector.
4. Clamp the AC CORD.
5. Insert AC CORD bushing into the AC CORD BRACKET.
6. AC CORD is pushed into the bottom of the bracket.
TX-LR37S25
16
7.3.
VESA Rail Installation
1. Stick the FELT.
2. Metal Support on the LCD PANEL.
2. Metal Support on the LCD PANEL.
(insert positioning.
→
)
3. Fix them with SCREW.
Click on the first or last page to see other TX-LR37S25 service manuals if exist.