DOWNLOAD Panasonic TX-LR32E6 Service Manual ↓ Size: 4.65 MB | Pages: 68 in PDF or view online for FREE

TX-LR32E6

7

• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
• For the information of the open source software, refer to [eHELP] (Support > Licence).

80 W

0.20 W

80 cm / 32 inches

 H  D)

724 mm 

 489 mm  207 mm (With Pedestal)

724 mm 

 434 mm  53 mm (TV only)

9.5 kg Net (With Pedestal)
8.5 kg Net (TV only)

AC 220-240 V, 50 / 60 Hz

1,920 (W) 

 1,080 (H) 

LED LCD panel

SCART (Audio/Video in, Audio/Video out, RGB in)

RCA PIN Type 

 1

1.0 V[p-p] (75 

)

RCA PIN Type 

 2

0.5 V[rms]

1.0 V[p-p] (including synchronisation)

±0.35 V[p-p]

TYPE A Connectors
HDMI 1 / 3: Content Type, Deep Colour
HDMI 2: Content Type, Audio Return Channel, Deep Colour

• This TV supports “HDAVI Control 5” function.

Common Interface slot (complies with CI Plus) 

 1

RJ45, IEEE802.3 10BASE-T / 100BASE-TX

USB2.0 DC 5 V, Max. 500 mA

PCM / Dolby Digital / DTS, Fibre optic

Digital cable services (MPEG2 and MPEG4-AVC(H.264))

Check the latest information

Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))

on the available services at 

PAL D, K, 

VHF R1 - R2

VHF R3 - R5

the following website.

VHF R6 - R12

UHF E21 - E69

(English only)

Playback of NTSC tape from some PAL Video recorders (VCR)

http://panasonic.net/viera/support

Playback from M.NTSC Video recorders (VCR)

Playback from NTSC Video recorders (VCR)

VHF / UHF

(90 mm 

 22 mm)  2    8

20 W (10 W + 10 W)

M3 (3.5 mm) stereo mini Jack 

 1

Temperature : 0

C - 35C  

Humidity : 20% - 80% RH (non-condensing)

IEEE802.11a/n
5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz
IEEE802.11b/g/n
2.412 GHz - 2.472 GHz
Security: WPA2-PSK (TKIP/AES)

WPA-PSK (TKIP/AES)

WEP (64 bit/128 bit)

*1: when the TV is turned off with the remote control and no function is active
*2: The frequency and channel differ depending on the country. Follow the regulations of your country for the frequency range.

TX-LR32E6

8

After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.

[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )

Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.

• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.

Main item

Sub item

Sample Data

Remark

ADJUST

CONTRAST

default value

COLOR

default value

TINT

default value

SUB-BRT

default value

BACKLGT

default value

B-Y-G

default value

R-Y-A

default value

V COM

default value

WB-ADJ

R-GAIN

default value

G-GAIN

default value

B-GAIN

default value

R-CENT

default value

G-CENT

default value

B-CENT

default value

OPTION

Boot

default value

Factory Preset.

STBY-SET

default value

EMERGENCY

default value

CLK MODE

default value

CLOCK

default value

EDID-CLK

default value

SRV-TOOL

default value

See next.

TX-LR32E6

9

1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.

SOS History (Number of LED blinking ) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory
shipment setting].

Note : To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.

1. Disconnect the AC cord from wall outlet.

1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for

CinemaNow.

2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC

(IC8000) and NAND Flash (IC8900).

When Main IC is replaced, NAND Flash should be also replaced with new one the same time.
When NAND Flash is replaced, Main IC is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for
more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.

TX-LR32E6

10

1. Select [DRV Check - USBHDD Check] in Service Mode.
2. Press [OK] button on the remote control for more than 3 seconds.

1. Purpose

Restrict a function for hotels.

2. Access command to the Hotel mode setup menu.

In order to display the Hotel mode setup menu: 
While pressing [VOLUME (-)] button of the main unit,
press [AV] button of the remote control three times within
2 seconds.

Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode setup menu

Disconnect AC power cord from wall outlet.

4. Explain the Hotel mode setup menu

Item

Function

Hotel Mode

Select hotel mode On/Off

Initial INPUT

Select input signal modes.
Set the input, when each time power is switched 
on.
Selection :
Off,Analogue,DVB-C,DVB-T,AV1,AV2,HDMI1,
HDMI2

• Off: give priority to a last memory. However, 

Euro model is compulsorily set to TV.

Initial POS

Select programme number.
Selection :
Off/0 to 99

• Off: give priority to a last memory.

Initial VOL LEVEL Adjust the volume when each time power is 

switched on.
Selection Range :
Off/0 to 100

• Off: give priority to a last memory.

Maximum Vol Level Adjust maximum volume.

Range :
0 to 100

Button Lock

Select local key conditions.
Selection :
Off/SETUP/MENU/ALL

• OFF: altogether valid
• SETUP: only F-key is invalid

      (Tuning guide (menu) can not be selected.) 

• MENU: only F-key is invalid

(only Volume/Mute can be selected.)

• ALL: altogether invalid.

Remote Lock

Select remote control key conditions.
Selection :
Off/SETUP/MENU

• OFF: altogether valid.
• SETUP: only Setup menu is invalid.
• MENU: Picture/Sound/Setup menu are invalid.

Private Information Select private information for VIERA Cast is Keep

or Reset if Hotel mode is set to [On] when TV
power on.
Selection :
Keep/Reset

• Keep: private information for VIERA Cast is 

keep

• Reset: private information for VIERA Cast is 

reset