Panasonic TX-LR32E6 Service Manual ▷ View online
TX-LR32E6
6
3 Service Navigation
3.1.
Service Hint
Board Name
Main Device
Remarks
A BOARD
TUN, OFDM, ADV, LD4, STBY EEP
Repairable
P BOARD
Power Supply
Repairable
K BOARD
LED/RM/CATS
Repairable
TX-LR32E6
7
4 Specifications
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
• For the information of the open source software, refer to [eHELP] (Support > Licence).
• For the information of the open source software, refer to [eHELP] (Support > Licence).
Rated power consumption
80 W
Standby power consumption
*1
0.20 W
Visible screen size (diagonal)
80 cm / 32 inches
Dimensions (W
H D)
724 mm
489 mm 207 mm (With Pedestal)
724 mm
434 mm 53 mm (TV only)
Mass
9.5 kg Net (With Pedestal)
8.5 kg Net (TV only)
8.5 kg Net (TV only)
Power source
AC 220-240 V, 50 / 60 Hz
Display Resolution
1,920 (W)
1,080 (H)
Panel
LED LCD panel
Connection Terminals
AV1 input / output
SCART (Audio/Video in, Audio/Video out, RGB in)
AV2 input
VIDEO
RCA PIN Type
1
1.0 V[p-p] (75
)
(COMPONENT / VIDEO)
AUDIO L - R
RCA PIN Type
2
0.5 V[rms]
Y
1.0 V[p-p] (including synchronisation)
P
B
, P
R
±0.35 V[p-p]
HDMI 1 / 2 / 3 input
TYPE A Connectors
HDMI 1 / 3: Content Type, Deep Colour
HDMI 2: Content Type, Audio Return Channel, Deep Colour
HDMI 1 / 3: Content Type, Deep Colour
HDMI 2: Content Type, Audio Return Channel, Deep Colour
• This TV supports “HDAVI Control 5” function.
Card slot
Common Interface slot (complies with CI Plus)
1
ETHERNET
RJ45, IEEE802.3 10BASE-T / 100BASE-TX
USB 1 / 2
USB2.0 DC 5 V, Max. 500 mA
DIGITAL AUDIO Output
PCM / Dolby Digital / DTS, Fibre optic
Receiving systems / Band name
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
Check the latest information
DVB-T / T2
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
on the available services at
PAL D, K,
VHF R1 - R2
VHF R3 - R5
the following website.
SECAM D, K
VHF R6 - R12
UHF E21 - E69
(English only)
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
http://panasonic.net/viera/support
M.NTSC
Playback from M.NTSC Video recorders (VCR)
NTSC (AV input only)
Playback from NTSC Video recorders (VCR)
Aerial input
VHF / UHF
Sound
Speaker
(90 mm
22 mm) 2 8
Audio output
20 W (10 W + 10 W)
Headphones
M3 (3.5 mm) stereo mini Jack
1
Operating Conditions
Temperature : 0
C - 35C
Humidity : 20% - 80% RH (non-condensing)
Built-in wireless LAN
Standard compliance and Frequency range*
2
:
IEEE802.11a/n
5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz
IEEE802.11b/g/n
2.412 GHz - 2.472 GHz
Security: WPA2-PSK (TKIP/AES)
5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz
IEEE802.11b/g/n
2.412 GHz - 2.472 GHz
Security: WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit/128 bit)
*1: when the TV is turned off with the remote control and no function is active
*2: The frequency and channel differ depending on the country. Follow the regulations of your country for the frequency range.
*2: The frequency and channel differ depending on the country. Follow the regulations of your country for the frequency range.
TX-LR32E6
8
5 Service Mode
5.1.
How to enter into Service Mode
5.1.1.
Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
5.1.2.
Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
5.1.3.
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
5.1.4.
Contents of adjustment mode
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
Main item
Sub item
Sample Data
Remark
ADJUST
CONTRAST
default value
COLOR
default value
TINT
default value
SUB-BRT
default value
BACKLGT
default value
B-Y-G
default value
R-Y-A
default value
V COM
default value
WB-ADJ
R-GAIN
default value
G-GAIN
default value
B-GAIN
default value
R-CENT
default value
G-CENT
default value
B-CENT
default value
OPTION
Boot
default value
Factory Preset.
STBY-SET
default value
EMERGENCY
default value
CLK MODE
default value
CLOCK
default value
EDID-CLK
default value
SRV-TOOL
default value
See next.
TX-LR32E6
9
5.2.
SRV-TOOL
5.2.1.
How to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
2. Press [OK] button on the remote control.
5.2.2.
Display of SOS History
SOS History (Number of LED blinking ) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory
shipment setting].
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory
shipment setting].
5.2.3.
POWER ON TIME/COUNT
Note : To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
5.2.4.
Exit
1. Disconnect the AC cord from wall outlet.
5.3.
Technical Descriptions
5.3.1.
Specification of KEY for DTCP-IP, WMDRM and Widevine
5.3.2.
General information:
1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for
CinemaNow.
2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC
(IC8000) and NAND Flash (IC8900).
5.3.3.
Replacement of ICs:
When Main IC is replaced, NAND Flash should be also replaced with new one the same time.
When NAND Flash is replaced, Main IC is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for
more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
When NAND Flash is replaced, Main IC is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for
more than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
Click on the first or last page to see other TX-LR32E6 service manuals if exist.