DOWNLOAD Panasonic TX-LR32D25 Service Manual ↓ Size: 15.45 MB | Pages: 85 in PDF or view online for FREE

TX-LR32D25

9

While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.

• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.

Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.

Main item

Sub item

Sample Data

Remark

ADJUST

CONTRAST

000

COLOR

4C

TINT

00

SUB-BRT

808

BACKLGT

22E

B-Y-G

34

R-Y-A

00

WB-ADJ

R-GAIN

F7

G-GAIN

FB

B-GAIN

DB

R-CENT

82

G-CENT

80

B-CENT

86

OPTION

Boot

ROM

Factory Preset.

STBY-SET

00

EMERGENCY

ON

CLK MODE

00

CLOCK

0E4

RM-SET

00

Fixed.

SRV-TOOL

00

See next.

TX-LR32D25

10

1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.

SOS History (Number of LED blinking ) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory
shipment setting].

Note : To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.

1. Disconnect the AC cord from wall outlet.

TX-LR32D25

11

1. Press the ‘RECALL’ button on the remote control and press ‘-’ vol button on the LCD panel.
2. Press button number 1 on the remote control to select for Adjustment.
3. Self Check to Exit.

1. Press the ‘MENU’ button (on the remote control) and the ‘DOWN’ button on the LCD panel.
2. Press ON/OFF button on the panel to Exit.

1. Press the ‘VOLUME DOWN’ button on the TV panel and simultaneously press the AV button on the remote control 3 times to

enter Hotel Mode.

2. Set Hotel mode ‘on’, then press ‘EXIT’ to come out.

Item

Function

Hotel Mode

Select hotel mode ON/OFF

Initial INPUT

Select input signal modes.
Set the input, when each time power is switched 
on.
Selection :
OFF/Analogue TV/Digital TV/AV1/AV2/AV3/PC/
HDMI1/HDMI2/HDMI3

• Off: give priority to a last memory.
• Selectable input is depend on the model.

Initial POS

Select programme number.
Selection :
Off/0 to 100

• Off: give priority to a last memory.

Initial VOL level

Adjust the volume when each time power is
switched on.
Selection/Range :
Off/0 to 100

• Off: give priority to a last memory.

Maximum VOL
level

Adjust maximum volume.
Range :
0 to 100

Button lock

Select local key conditions.
Selection :
Off/SETUP/MENU/All

• Off: altogether valid.
• SETUP: only F-key is invalid.

(Tuning guide (menu) can not be selected.)

• MENU: only F-key is invalid.

(only Volume/Mute can be selected.)

• ALL: altogether invalid.

Remote lock

Select remote control key conditions.
Selection :
Off/SETUP/MENU

• Off: altogether valid.
• SETUP: only Setup menu is invalid.
• MENU: Picture/Sound/Setup menu are invalid.

TX-LR32D25

12

Use the self-check function to test the unit.

1. Checking the IIC bus lines
2. Power LED Blinking timing

Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.

Disconnect the AC cord from wall outlet.

Confirm the following parts if NG was displayed.