Panasonic TX-LR26X10 Service Manual ▷ View online
TX-LR26X10
9
4 Power LED Blinking Timing
1. Subject
Information of LED Flashing timing.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
Blinking times
Contents
1
Inverter_SOS
3
SOS_3.3V over voltage protection
4
DTV_ 9V decreased / short circuit, main convertor stop detection.
5
Main_ 9V decreased
6
Sub_ 5V decreased
7
Sub_ 3.3V decreased
8
MAIN_ 3.3V decreased
9
Sound_ SOS
13
Emergency SOS
14
Audio PWM SOS
TX-LR26X10
10
5 Location of Controls and Components
5.1.
Wire Dressing
TX-LR26X10
11
1. Wiring No.1 ~ No.6
2. Remove dust of terminal of LVDS and PB connector. (by ion blow)
2. Remove dust of terminal of LVDS and PB connector. (by ion blow)
Pos. A11
3. Insert LVDS into A11.
4. Stick felt.
4. Stick felt.
Wire
Clamper
1
2
3
4
5
6
7
8
9
10
11
12
13
No.1 A10 ~ V10
No.2 A01 ~ K01
No.3 A12 ~ SP(L)
No.4 A12 ~ SP(R)
No.5 INV ~ A20
No.6 INV ~ P2
TX-LR26X10
12
6 Disassembly and Assembly Instructions
6.1.
AC Cord Dressing
1. Clamp plug with clamper.
2. Insert beads 3pcs. And slide down to lower hole.
2. Insert beads 3pcs. And slide down to lower hole.
Click on the first or last page to see other TX-LR26X10 service manuals if exist.