Panasonic TX-51P100X / TX-51P100H / TX-51P100HL / TX-51P100HQ / TX-51P100HZ Service Manual ▷ View online
- 5 -
Disassembly for Service
Disassembly Flowchart
This flowchart indicates disassembly items of the cabinet parts and circuit boards in order to find the items
necessary for servicing, when reassembling, perform the procedures in the reverse order.
necessary for servicing, when reassembling, perform the procedures in the reverse order.
Top Cabinet
Screen
Rear Cover (Bottom)
Rear Cover (Top)
Speaker Grille
Speaker Ass'y
Ornament Panel
CRT Ass'y
DY, VM coil
Remove CRT Board
(LR, LG, LB) from
CRT,Connector
(LR, LG, LB) from
CRT,Connector
Main Chassis
A/B2/D/E/F/H/P/T
W/CP/DC/DG
W/CP/DC/DG
+
Mirror
G-Board
CRT Lens
!"#
- 6 -
Ornament Panel
1. The Ornament Panel is secured by (3) striker pins.
Grip the Ornament Panel at the side corner pull to
remove.
remove.
Cabinet ( Top )
1. Remove (11) Screws
Speaker Grille
1. Remove (2) screws.
Speaker Ass’s
1. Remove (10) screws.
Ornament Panel
(11) Screws
Top Cabinet
(11) Screws
(2) Screws
Speaker Grille
(10) Screws
Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be
reconnected using jumper leads if necessary before power is applied to Receiver for service.
$ !"#
- 7 -
Screen
1. Remove (14) screws.
Mirror
1. Remove (4) screws.
2. Remove (8) screws.
Rear Cover (Top)
1. Remove (4) screws.
2. Remove (2) screws.
Rear Cover (Bottom)
1. Remove (18) screws.
2. Remove (1) screws.
2. Remove (1) screws.
Screen Frame (R)
Screen Frame (L)
Top Cabinet
Screen Frame (Top)
Screen Frame (Bottom)
(14) Screws
Screen Lenticular Lens
Screen Fresnel Lens
Screen Fresnel Lens
Front Side
Part No. Lavel
Mirror (Rear View)
(4) Screws
Rear Cover (Top)
Mirror (Rear View)
(8) Screws
(4) Screws
Top Cabinet
Screw
(18) Screws
AC Cord Cover
(1) Screw
plate
Rear Cover
(Bottom)
(Bottom)
% !"#
- 8 -
Service Hints
Service position for Main chassis
1. Remove the Rear Cover (Bottom) by removing
(19) screws around its perimeter.
2. Remove lead wires and bundles from holders as
necessary.
3. Pull out main chassis and stand it.
Service Position for D/F/W/T/CF/DC
B2-Board
B2-Board
1. Remove the each circuit board from A or E-Board.
2. Connect extension cables between individual cir-
2. Connect extension cables between individual cir-
cuit board and A or E-Board.
Note: Extension cable kit is supplied as service fix-
tures and tools. ( Part No. TZS709010 )
Service Position for CP, DC-Board
1. Remove the Rear Cover (Bottom) by removing
(19) screws around its perimeter.
2. Remove (1) screws secured the CP and DC
Board.
3. Pull out the CP and DC Board.
Service Position for P-Board
1. Remove the Rear Cover (Bottom) by removing
(19) screws around its perimeter.
2. Remove (1) screws secured the P Board.
3. Pull out the P Board.
3. Pull out the P Board.
Service Position for G-Board
1. Remove the Top Cabinet Ass’y.
2. Remove G-Board by removing (3) screws.
2. Remove G-Board by removing (3) screws.
A
E
Main chasisis
A
E
D
CF
W
F
T
DC
B2
CP-Board
DC-Board
P-Board
G-Board
(3) Screws
(3) Screws
& !"#
Click on the first or last page to see other TX-51P100X / TX-51P100H / TX-51P100HL / TX-51P100HQ / TX-51P100HZ service manuals if exist.