DOWNLOAD Panasonic TX-47PT1F (serv.man2) Service Manual ↓ Size: 17.3 MB | Pages: 96 in PDF or view online for FREE

− 

−

Decorative Panel(Center)

Decorative Panel(Bottom)

Rear Cover(Bottom)

Screen Frame Ass'y

Top Cabinet

CRT Ass'y

DY, VM coil

Screen

Rear Cover

Projection
Miller

Remove CRT Board
from CRT, Connectors

M/RM/K2-Board

Main Chassis

P-Board

CP, DC-Board

A/E/D/F/H/G/
F2/K/W

Right Rear Cover
(Bottom)

Left Rear Cover
(Bottom)

CRT Lens

Speaker Ass'y

This flowchart indicates disassembly items of the cabinet parts and circuit boards in order to find the items
necessary for servicing, when reassembling, perform the procedures in the reverse order.

  $ !"

− 

−

Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be

reconnected using jumper leads if necessary before power is applied to Receiver for service.

1. The front decorative panel is secured by (2)

screws.

1. Remove (5) screws around rear cover’s perimeter.

2. The Center Decorative Panel is secured by (4)

striker pins. Grip the Center Decorative Panel at
the side corner pull to remove.

3. Remove (4) screws which secured the Screen

Frame Ass’y.

4. Grasp the Screen Frame Ass’y on the sides at the

bottom. Pull out on bottom, push up the Screen
Frame Ass’y then pull out top edge.

1. Place frame face down on soft surface.
2. Remove (10) screws.
3. Remove (5) screen fixing Metals.

  % !"

− 

−

1. Remove the Screen Frame Ass’y.
2. Remove (2) screws on the Top Rear Cover.

3. Remove the Top Cabinet by removing (8) screws

which secured with the Bottom Cabinet Ass’y.

4. Hold the Top Cabinet Ass’y and pull out at the bot-

tom.

1. Remove bottom decorative panel located under

control panel.

2. Each Left and Right speaker is secured to the cab-

inet with (3) screws for each bracket.

3. Disconnect the R & L speaker lead connectors

from the speaker units.

1. Remove the Screen Frame.
2. Remove (2) screws.

  !"

− 

−

3. Remove (10) screws around its perimeter.
4. Slide Bottom Cover up and pull out at the bottom.

1. Remove (11) screws around its perimeter.

1. The Left Bottom Cover is secured with (7) screws

around its perimeter.

2. The Right Bottom Cover is secured with (7) screws

around its perimeter.

  & !"