DOWNLOAD Panasonic TX-40CX670E / TX-40CX680E / TX-40CXR700 (serv.man2) Service Manual ↓ Size: 7.81 MB | Pages: 49 in PDF or view online for FREE

Model
TX-40CX670E TX-40CX680E TX-40CXR700 (serv.man2)
Pages
49
Size
7.81 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LA59 CHASSIS
File
tx-40cx670e-tx-40cx680e-tx-40cxr700-sm2.pdf
Date
PREV: Panasonic TX-40CX670E / TX-40CX680E / TX-40CXR700 Service Manual

Panasonic TX-40CX670E / TX-40CX680E / TX-40CXR700 (serv.man2) Service Manual ▷ View online

13
6.5.
System Information
6.5.1.
How to access
1. While pressing [MENU] button on the remote control.
2. To select  [? Help] and then to select [System Information].
6.5.2.
How to exit
Press the [RETURN] button on the remote control.
System Information
SW version
3001-10000-abcde
3001
10000
abcde
Peaks SW
GenX Main
GenX Sub (optional)
Status1
0c 8801-0003 0080-0000
0c
8801-0003
0080-0000
Outer model ID
Inner model ID
Panel inch size
Status2
0008-008-000fac
0008
008
000fac
LSI Package
LSI Release
Model data version
Status3
00-000000-F000
00
00
00
00
F000
Number of bad block in NAND Flash (dec)
Peaks reboot counter
System crash counter
Emergency (SOS) counter
Peaks NAND Maker ID
Status4
A00000-0000003-00000
A
00000
0000003
00000
Power-On period (A <= 100hrs, B <= 200hrs, C > 200hrs)
Total Power-On time (dec, max is 65535)
Power-On timer (dec, max is 1048575)
Fixed (always)
Status5
00000-10000 15e010ff
0
0
0
0
0
1
0000
15e010ff
SOS history (latest)
SOS history (last time)
SOS history (last but one)
SOS history (2
nd
 time after shipping)
SOS history (1
st
 time after shipping)
Self-check _0-never selfcheck
                    1-production selfcheck by "FF" or USCM 
                    2-user selfcheck by pressing "OK" 
Fixed (always)
Panel ID
Status6
01010010-1000009
01010010
1000009
Peaks EEPROM version
STM EEPROM version
Status7
00000-0741
00000
0741
STM ROMCOR version
AJAX_CE version
14
6.6.
Hotel mode
6.6.1.
Purpose
Restrict a function for hotels.
6.6.2.
Access command to the Hotel 
mode setup menu
In order to display the Hotel mode setup menu, 
please enter the following command (within 2 seconds).
[TV]: Vol.[Down] + [REMOTE] : AV (3 times)
Then, the Hotel mode setup menu is displayed.
6.6.3.
To exit the Hotel mode setup menu
Switch off the power with the [POWER] button on the main unit 
or the [POWER] button on the remote control.
6.6.4.
Explain the Hotel mode setup menu
Item
Function
Hotel Mode
Select hotel mode On/Off
Initial INPUT
Select input signal modes.
Set the input, when each time power is switched 
on.
Selection :
Off, Analogue, DVB-C, DVB-T, AV1, AV2, HDMI1, 
HDMI2, HDMI3
• Off: give priority to a last memory. 
Initial POS
Select programme number.
Selection :
 Off/0 to 99
• Off: give priority to a last memory
Initial VOL Level
Adjust the volume when each time power is 
switched on.
Selection/Range :
Off/0 to 100
• Off: give priority to a last memory
Maximum VOL 
Level
Adjust maximum volume.
Range : 
 0 to 100
Button Lock
Select local key conditions.
Selection : 
 Off/SETUP/MENU
• Off: altogether valid
• SETUP: only F-key is invalid
(Tuning guide (menu) can not be selected.)
• MENU: only F-key is invalid
(only Volume/Mute can be selected.)
Remote Lock
Select remote control key conditions.
Selection :
 Off/SETUP/MENU
• Off: altogether valid
• SETUP: only Setup menu is invalid
• MENU: Picture/Sound/Setup menu are invalid
• VOD: NETFLIX service is invalid
Private Information Select private information for VIERA Cast is Keep 
or Reset if Hotel mode is set to [On] when TV 
power on.
Selection :
Keep/Reset
• Keep: private information for VIERA Cast is 
keep
• Reset: private information for VIERA Cast is 
reset
15
6.7.
Data Copy by USB Memory
Note:
SD card can not be used for Data Copy.
6.7.1.
Purpose
(a) Board replacement (Copy the data when exchanging A-board):
When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
(b) Hotel (Copy the data when installing a number of units in hotel or any facility):
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to 
other TVs.
6.7.2.
Preparation
Make pwd file as startup file for (a) or (b) in a empty USB Memory.
1. Insert a empty USB Memory to your PC.
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by default 
(New Text Document.txt).
3. Right-click the new text document that you just created and select rename, and then change the name and extension of the 
file to the following file name for (a) or (b) and press ENTER.
File name:
(a) For Board replacement : boardreplace.pwd
(b) For Hotel : hotel.pwd 
Note:
Please make only one file to prevent the operation error.
No any other file should not be in USB Memory.
16
6.7.3.
Data copy from TV set to USB Memory
1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB terminal.
On-screen Display will be appeared according to the startup file automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement : 2770
(b) For Hotel : 4850
Data will be copied from TV set to USB Memory.
It takes around 2 to 6 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set. 
5. Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement : user_setup
(b) For Hotel : hotel 
Page of 49
Display

Click on the first or last page to see other TX-40CX670E / TX-40CX680E / TX-40CXR700 (serv.man2) service manuals if exist.

RANDOM: