Panasonic TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P Service Manual ▷ View online
7.1. Removing the stand ass´y
1. Lay down the main unit so that the rear cover faces upward.
2. Remove the cable cover.
2. Remove the cable cover.
3. Remove the fixing screws (4pcs).
4. Remove the stand ass´y.
4. Remove the stand ass´y.
7.2. Removing the rear cover
1. Remove the stand ass´y. (See 7.1.)
2. Remove the fixing screws (11pcs).
3. Remove the rear cover.
2. Remove the fixing screws (11pcs).
3. Remove the rear cover.
7.3. Removing the speaker box L
and R
1. Remove the rear cover. (See 7.2.)
2. Disconnect the speaker relay couplers (SPL and SPR).
3. Remove the fixing screws (6pcs).
4. Remove the speaker box L and R.
2. Disconnect the speaker relay couplers (SPL and SPR).
3. Remove the fixing screws (6pcs).
4. Remove the speaker box L and R.
7 Servicing method
13
TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P
7.4. Removing the rear AV bracket
1. Remove the rear cover (See 7.2.) and the speaker box L
and R. (See 7.3.)
2. Release the AC cord from the rear AV bracket and clamper
on the rear metal frame, and remove the AC cord. (the
coupler AP10)
coupler AP10)
3. Remove the fixing screws (3pcs).
4. Remove the rear AV bracket ass´y.
4. Remove the rear AV bracket ass´y.
7.5. Removing the rear metal frame
1. Remove the rear AV bracket. (See 7.4.)
2. Release the cables from the clampers on the rear metal
2. Release the cables from the clampers on the rear metal
frames.
3. Remove the fixing screws (4pcs).
4. Remove the rear metal frames (right and left).
4. Remove the rear metal frames (right and left).
7.6. Removing the P-Board
1. Remove the rear cover. (See 7.2.)
2. Disconnect the couplers P2 (CN101), P3 (CN201) and P1
2. Disconnect the couplers P2 (CN101), P3 (CN201) and P1
(CN203).
3. Remove the fixing screw (4pcs).
4. Remove the P-Board.
4. Remove the P-Board.
7.7. Removing the XV-Board (For
LXD50 model only)
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers carefully (XV22 and DG22).
3. Remove the fixing screws (5pcs).
4. Remove the XV-Board unit.
5. Remove the screws (×5
3. Remove the fixing screws (5pcs).
4. Remove the XV-Board unit.
5. Remove the screws (×5
)
6. Remove the XV-Board.
14
TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P
7.8. Removing the DG-Board
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers (DG6 and DG7), the flexible cable
(DG3) and the bridge cables (DG4 and DG5).
3. Remove the fixing screws (6pcs).
4. Remove the DG-Board.
4. Remove the DG-Board.
7.9. Removing the AP-Board
1. Remove the rear AV bracket ass´y (See 6.4.) and the rear
metal frame. (See 6.5.)
2. Disconnect the couplers (AP2, AP6 and AP10 (AC Cord))
and the bridge cables (H1 (AP1) on the H-Board, P3/CN201
(AP3) on the P-Board and DG4 (AP4) and DG5 (AP5) on
the DG-Board.
(AP3) on the P-Board and DG4 (AP4) and DG5 (AP5) on
the DG-Board.
3. Remove the fixing screws (7pcs).
4. Remove the AP-Board.
4. Remove the AP-Board.
7.10. Removing the H-Board
1. Remove the rear AV bracket (See 7.4.) (and the rear metal
frame). (See 7.5.)
2. Disconnect the flexible cable (H3), the bridge cable (H1)
and the couplers (H4 and H5).
3. Remove the fixing screws (4pcs).
4. Remove the H-Board.
4. Remove the H-Board.
7.11. Removing G-Board bracket
1. Remove the rear AV bracket (See 7.4.).
2. Disconnect the couplers (G1, G4, G5, G10 and G11).
3. Remove a screw on the DG-Board and release the earth
2. Disconnect the couplers (G1, G4, G5, G10 and G11).
3. Remove a screw on the DG-Board and release the earth
lug from the G-Board.
4. Release the cables from the cable holders of the G-Board
bracket.
5. Remove the fixing screws (2pcs).
6. Remove the G-Board bracket (with the G-Board).
6. Remove the G-Board bracket (with the G-Board).
15
TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P
7.12. Removing the G-Board
1. Remove the G-Board bracket. (See 7.10.)
2. Push the hooks (7 points) to release the G-Board from the
2. Push the hooks (7 points) to release the G-Board from the
G-Board brackets.
3. Remove the G-Board.
7.13. Removing the K-Board
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame (right). (See 7.5.)
2. Remove a coupler (K6) and release the cables from holder
on the K-Board bracket.
3. Remove the screws (2pcs).
4. Remove the K-Board bracket with the K-board.
4. Remove the K-Board bracket with the K-board.
5. Remove a screw.
6. Remove the K-Board.
6. Remove the K-Board.
7.14. Removing the V-Board
1. Remove the rear cover. (See 7.2.)
2. Remove the screws (2pcs).
3. Remove the V-Board.
4. Disconnect the coupler (V1).
2. Remove the screws (2pcs).
3. Remove the V-Board.
4. Disconnect the coupler (V1).
7.15. Removing the main chassis
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers (CN203, DG6, DG7, H4, H5, AP6,
AP10) and the earth lug (on the H-Board) from G-Board.
3. Release the cables from the clampers on the main chassis.
4. Remove the fixing screws (3pcs).
5. Remove the main chassis with the P-Board, the AP-Board,
4. Remove the fixing screws (3pcs).
5. Remove the main chassis with the P-Board, the AP-Board,
the DG-Board and the H-Board.
16
TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P
Click on the first or last page to see other TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P service manuals if exist.