Panasonic TX-29PS10D / TX-29PS10F / TX-29PS10P / TX-29PS10B Service Manual ▷ View online
Description
Cct Ref
Parts Number
Description
Cct Ref
Parts Number
DOOR LID
21
TKP0E10604
MODEL LABEL
22
TBM0E0063-1
POWER BUTTON
23
TBX0E80401
INSTRUCTION BOOKS
GERMAN
.
TQB8E3772A-S
ITALIAN
.
TQB8E3772C-S
FRENCH
.
TQB8E3772D-S
I.C.s
32K EAROM 24C3210PI2.7
IC1104
D00/2AD
DIFFERENCES FOR MODEL TX--29PS10D/B
EXPLODED VIEW
A P.C.B.
18
TNP8EA007AR
BACK COVER
19
TKU0E0117
CABINET
20
TKY0E0119
DOOR LID
21
TKP0E10608
MODEL LABEL
22
TBM0E0082
POWER BUTTON
23
TBX0E80402
INSTRUCTION BOOKS
GERMAN
.
TQB8E3772A-S
I.C.s
32K EAROM 24C3210PI2.7
IC1104
D00/2AD
DIFFERENCES FOR MODEL TX--29PS10F
EXPLODED VIEW
A P.C.B.
18
TNP8EA007AP
BACK COVER
19
TKU0E0111
CABINET
20
TKY0E0104
DOOR LID
21
TKP0E10604
MODEL LABEL
22
TBM0E0064
POWER BUTTON
23
TBX0E80401
INSTRUCTION BOOKS
GERMAN
.
TQB8E3637A-S
DUTCH
.
TQB8E3637B-S
FRENCH
.
TQB8E3637D-S
SPANISH
.
TQB8E3637E-S
SWEDISH
.
TQB8E3637F-S
NORWEGIAN
.
TQB8E3637G-S
FINNISH
.
TQB8E3637H-S
DANISH
.
TQB8E3637K-S
I.C.s
32K EAROM 24C3210PI2.7
IC1104
D00/2AF
DIFFERENCES FOR MODEL TX--29PS10P
EXPLODED VIEW
A P.C.B.
18
TNP8EA007AQ
BACK COVER
19
TKU0E0111
CABINET
20
TKY0E0104
DOOR LID
21
TKP0E10604
MODEL LABEL
22
TBM0E0065
POWER BUTTON
23
TBX0E80401
INSTRUCTION BOOKS
BULGARIAN
.
TQB8E3776M-S
ROMANIAN
.
TQB8E3776N-S
POLISH
.
TQB8E3776P-S
HUNGARIAN
.
TQB8E3776Q-S
CZECH
.
TQB8E3776R-S
ENGLISH
.
TQB8E3776U-S
SLOVAKIAN
.
TQB8E3776W-S
I.C.s
32K EAROM 24C3210PI2.7
IC1104
D00/2AP
25
SCHEMATIC DIAGRAMS FOR MODELS
TX-29PS10D, TX-29PS10F, TX-29PS10P, TX-29PS10D/B
(EURO-9L CHASSIS)
NOTE
1. RESISTOR
All resistors are carbon ¼W resistor, unless marked otherwise.
Unit of resistance is OHM (
Unit of resistance is OHM (
Ω) (k=1,000, M=1,000,000)
2. CAPACITORS
All capacitors are ceramic 50V unless marked otherwise.
Unit of capacitance is
Unit of capacitance is
µF unless otherwise stated.
3. COIL
Unit of inductance is
µH, unless otherwise stated.
4. TEST POINT
Test Point Position
5. EARTH SYMBOL
Chassis Earth (Cold)
Line Earth (Hot)
6. VOLTAGE MEASUREMENT
Voltage is measured by a d.c. voltmeter.
Measurement conditions are as follows:
Power source
Measurement conditions are as follows:
Power source
a.c. 220V-240V, 50Hz
Receiving Signal
Colour Bar signal (RF)
All customer controls
Maximum position
7.
Indicates the Video signal path
Indicates the Audio signal path
These schematic diagrams are the latest at time of printing and are subject to change without notice.
REMARKS
a. Do not touch the hot part, or the hot and cold parts at the same time, as you are liable to a shock hazard.
b. Do not short circuit the hot and cold circuits as electrical components may be damaged.
c. Do not connect an instrument, such as an oscilloscope, to the hot and cold circuits simultaneously as this may cause
c. Do not connect an instrument, such as an oscilloscope, to the hot and cold circuits simultaneously as this may cause
fuse failure. Connect the earth of the instruments to the earth connection of the circuit being measured.
d. Make sure to disconnect the power plug before removing the chassis.
NOTE
1. The Power Supply Circuit contains a circuit area, which uses a separate power supply to isolate the earth connection.
The circuit is defined by HOT and COLD indications in the schematic diagram. All circuits, except the Power Circuit, are
COLD.
COLD.
IMPORTANT SAFETY NOTICE
Components identified by
mark have special characteristics
important for safety. When replacing any of these components, use
only manufacturers' specified parts.
only manufacturers' specified parts.
26
Click on the first or last page to see other TX-29PS10D / TX-29PS10F / TX-29PS10P / TX-29PS10B service manuals if exist.