Panasonic TX-24C300 / TX-24CW304 / TX-32C300 / TX-32CW304 / TX-40C300 / TX-40CW304 / TX-48C300 / TX-48CW304 / TX-24CR300 / TX-40CR300 / TX-48CR300 Service Manual ▷ View online
8
How to remove the pedestal and backcover (32, 40, 48 inch)
Lay the main unit face down. (see Fig.7)
Remove the 4 fixing screws and the pedestal assembly. (see Fig.8)
Remove the fixing screws and the back cover. (see Fig.9)
Fig.9
Fig.8
(1)
(1)
Fig.7
(1)
(1)
(1)
(1)
(2)
(2)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
9
Service Menu
You can see the service menu main screen below. You can check SW releases by using this menu. Some
Video settings can be done.
Video settings can be done.
How to enter into Service Menu
First press [MENU] button on the remote control, then type “4725” and the Service Main Menu will appear.
How to exit
To return from Service Menu simply press [EXIT] on remote control.
10
SOFTWARE UPDATE
MAIN SW UPDATE
In MB97 project please follow the update procedure below:
1. The
files
mb97_en.bin
RomBoot.bin
PM51.bin
usb_auto_update_D7L.txt
should be copied directly into root path of an empty flash memory (not in a folder).
RomBoot.bin
PM51.bin
usb_auto_update_D7L.txt
should be copied directly into root path of an empty flash memory (not in a folder).
2. Insert flash memory into the TV while TV is disconnected from AC mains.
3. Reconnect TV to main power and keep pressing the OK button on remote until LED starts blinking.
4. Now SW update is in progress and LED flashes until update is completed.
11
Hotel Mode
HOTEL TV FEATURES
The HOTEL TV is a special mode which restricts some operations of TV. This allows the customer to use the TV in
hotels,in prisons or in hospitals. The restrictions of a hotel TV are basically given below.
1. The user cannot increase the volume above a specified limit / Volume can be fixed to a certain level
2. The user could enable headphone direct volume control.
3. The user cannot reach some menus.
4. There is panel lock feauture which does not allow the user to use the keypad touch on the TV set when it is
active.
5. Start up source position can be limited for the user.
6. Last status could be used or not
7. Teletext could be disabled or enabled.
8. NVRAM data (like service list and user preferences, etc.) could be copied or set via USB device
9. Pin8 could be used or not
hotels,in prisons or in hospitals. The restrictions of a hotel TV are basically given below.
1. The user cannot increase the volume above a specified limit / Volume can be fixed to a certain level
2. The user could enable headphone direct volume control.
3. The user cannot reach some menus.
4. There is panel lock feauture which does not allow the user to use the keypad touch on the TV set when it is
active.
5. Start up source position can be limited for the user.
6. Last status could be used or not
7. Teletext could be disabled or enabled.
8. NVRAM data (like service list and user preferences, etc.) could be copied or set via USB device
9. Pin8 could be used or not
HOTEL TV MENU
To enter hotel menu, please press MENU(M) button on remote control, then key in “7935” and the hidden
Hotel TV Menu will appear on the screen
Hotel TV Menu will appear on the screen
HOTEL MODE
Setting “Hotel Mode” item 'On' activates hotel mode. In other words user can do only what he/she is allowed to do.
Restriction level can be determined by using other items on menu namely Volume Limit, Panel Button, OSD
Disable. In hotel mode, users can not reach channel table and install menu so they could not change any program
information.
Last Status
Restriction level can be determined by using other items on menu namely Volume Limit, Panel Button, OSD
Disable. In hotel mode, users can not reach channel table and install menu so they could not change any program
information.
Last Status
Setting “Last Status” item to 'On' enable TV open with the closing status. Otherwise, if “Last
Status” item is set 'Off' TV opens with standby status.
Panel Lock
Status” item is set 'Off' TV opens with standby status.
Panel Lock
Enables (Panel Lock = On) or prohibits (Panel Lock = Off) the use of front panel buttons.
RCU Inhibit
If OFF is selected TV will go on normal operation. If It is ON RCU will not function in any menu(including no menu)
except this menu. To turn this option OFF later, “hotel TV menu shortcut” (MENU(M)-7-9-3-5) can be used to pop
up this menu,
Startup Position
RCU Inhibit
If OFF is selected TV will go on normal operation. If It is ON RCU will not function in any menu(including no menu)
except this menu. To turn this option OFF later, “hotel TV menu shortcut” (MENU(M)-7-9-3-5) can be used to pop
up this menu,
Startup Position
Specifies the starting channel when TV is switched ON. May take one of following values:
AUTO
TV is opened using standby key or digit keys: Last channel or last external source when TV is turned off
TV
TV is opened using standby key: TV channel number that is specified on field Startup Channel
TV is opened using digit keys: Corresponding channel
Other external sources (EXT1, HDMI2, PC, FAV, SVHS etc.)
TV is opened using standby key or digit keys: Specified external source
Startup Channel
Specifies the starting TV channel’s ID which will be tuned when startup position is TV.
Volume Limit
Sets the maximum value the volume can have. “Volume Limit” can take values between 0-63.
Click on the first or last page to see other TX-24C300 / TX-24CW304 / TX-32C300 / TX-32CW304 / TX-40C300 / TX-40CW304 / TX-48C300 / TX-48CW304 / TX-24CR300 / TX-40CR300 / TX-48CR300 service manuals if exist.