Panasonic TX-21JT1P / TC-21JR1P / TX-14JT1P / TC-14JR1P Service Manual ▷ View online
WAVEFORM PATTERN TABLE
5
CONDITIONS:
Contrast:
MAX
Brightness: MID
Colour:
Colour:
MID
CATS: OFF
Sharpness: MID
ALIGNMENT SETTINGS
1. Select program position 60 and set the sharpness to minimum.
2. Press
2. Press
the
Off Timer button on the remote control and at the same time press the
∨∨∨∨====
(down) button on the customer
controls at the front of the TV, this will place the TV into Service Mode.
3. Press
the
∧∧∧∧
/
∨∨∨∨
buttons to step up / down through the functions.
4. Press
the
+
/
-
buttons to after the function values.
5. Press
the
STORE button after each adjustment has been made to store the required values.
6. To exit Service Mode press the Normalization button.
NOTE : The figures used below are nominal and used for representative purposes only.
Alignment Function
Setting indication
Note: All setting values are approximate
Settings / Special features
1. Vertical amplitude
V-Amp
31
Optimum setting
2. Vertical position
V-Pos
22
Optimum setting
3. Horizontal centre
H-Ctr
07
Optimum setting.
4. Red cutoff
R-Cut
148
Optimum setting.
5. Green cutoff
G-Cut
146
Optimum setting.
6. Blue cutoff
B-Cut
163
Optimum setting.
7. Red drive
R-Drv
37
Optimum setting.
8. Blue drive
B-Drv
25
Optimum setting.
9. AGC
AGC
29
Optimum setting.
10. Sub contrast
S-Con
26
Optimum setting.
11. Sub colour
S-Col
49
Optimum setting.
12. Sub bright
S-Bri
43
Optimum setting.
6
Click on the first or last page to see other TX-21JT1P / TC-21JR1P / TX-14JT1P / TC-14JR1P service manuals if exist.