Panasonic TX-21FS10AU Service Manual ▷ View online
Adjustment of CRT VRS
1. Preparation
a. Set DY to CRT not to tilt up and down left and right deflection.
b. Set CY to CRT and set CY magnet primarily (Fig. 1)
Purity magnet : Set purity magnet that 2 magnets are (TOP POSITION)
VRS magnet : Set purity magnet 2 magnets are (HORIZONTAL POSITION)
2. Adjustment
a. Receive that Cross Hatch pattern.
b. Adjust V-SHIFT -50Hz.
c.
Set 2 magnets of horizontal position to up and down equally so that it will be the center part of CRT. (Fig. 2)
10
TX-21FS10AU
Fig. 10
Fig. 11
Notes:
1. Wedge A, B and C should be inserted following the sequence of 1, 2 and 3 shown in Fig. 11.
2. The wedges should be set 120° apart from each other.
3. Be certain that three wedges are firmly fixed and the Deflection Yoke is tightly clamped in place.
Otherwise the Deflection Yoke may shift its position and cause a loss of convergence and purity.
11
TX-21FS10AU
3 Conductor Views
12
TX-21FS10AU
4 Schematic Diagram
13
TX-21FS10AU
Click on the first or last page to see other TX-21FS10AU service manuals if exist.