Panasonic TH-84LQ70U / TH-84LQ70W / TH-84LQ70C Service Manual ▷ View online
INF - 11
SECTION 1 SERVICE INFORMATION
<TH-84LQ70U/W/C>
3-2. Power LED Blinking timing chart
1. Subject
Information of LED Blinking timing chart.
2. Contents
When an abnormality has occurred to the unit, the protection circuit operates and resets to the stand by mode.
At this time,the defective block can be identified by the number of blinks of the Power LED on the front panel
of the unit.
of the unit.
* The failure code is the PTCT information displayed on the CD mode in the service mode. Refer to the item
[2-4. CD Mode] for further details.
INF - 12
SECTION 1 SERVICE INFORMATION
<TH-84LQ70U/W/C>
3-3. Diagnosis of the image
3-3-1. LCD Panel test mode
■
The failure-diagnosis by LCD Panel test mode
●
To find the possible failure point in LCD Panel or print Circuit Board when the abnormal picture is displayed.
[How to display the test pattern]
1) Main unit + remote control
1. While pressing [Volume(-)] button of the main unit,press RETURN button of the remote control three times.
2. Test pattern is displayed and Power LED lights red and orange alternately.
How to exit: Turn off the unit.
2) Remote control operation only
1. Press RECALL button of remote control
2. Press RETURN button of remote control
3. Press DEFAULT button of remote control for 3 seconds.
4. Test pattern is displayed and Power LED lights red and orange alternately.
How to exit: The unit automatically turn off after around 10 seconds.
[Display pattern]
* it is unfixed from which color it starts.
[Test pattern out put image]
White
Red
Green
Blue
Black
INF - 13
SECTION 1 SERVICE INFORMATION
<TH-84LQ70U/W/C>
INF - 14
SECTION 1 SERVICE INFORMATION
<TH-84LQ70U/W/C>
【
Reference:FRAME CREATION】
■
FRAME CREATION is the function to double the number of display segments of image and to show
a fast moving scene more finely.
・
・
The mode is memorised per input terminal.
During 4 Input multi display, all the 4 screens are switched to On/Off. The mode is also memorised separately from
that of 1-screen display.
・
・
Even when DEFAULTis selected, the Normal setting will not be restored.
・
The picture and the menu will disappear for a moment after you change setting.
■
Setting procedure and Diagnosis when the failure-diagnosis
1. Press PICTURE button of the remote control, and display PICTURE menu screen.
2. Change the item of "FRAME CREATION" into "Off".
Please check the symtoms when it is changed to "OFF".
3-3-2. Image does not appear correctly in DIGITAL LINK
• Check whether all of (A), (B), (C), and (D) are “OK” in NW mode.
• Check whether "H67DLK" is "OK" in ID mode.
• Check whether "H67DLK" is "OK" in ID mode.
Click on the first or last page to see other TH-84LQ70U / TH-84LQ70W / TH-84LQ70C service manuals if exist.