DOWNLOAD Panasonic TH-80BF1U / TH-80BF1W / TH-80BF1E Service Manual ↓ Size: 13.16 MB | Pages: 90 in PDF or view online for FREE

Model
TH-80BF1U TH-80BF1W TH-80BF1E
Pages
90
Size
13.16 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / TOUCH SCREEN LCD DISPLAY
File
th-80bf1u-th-80bf1w-th-80bf1e.pdf
Date

Panasonic TH-80BF1U / TH-80BF1W / TH-80BF1E Service Manual ▷ View online

DIS-30
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
2.18. Replacement of Front Glass
 1.  Remove the LCD Panel from the Cabinet. (Refer to steps 1 to 9 in "2.17. Replacement of LCD Panel")
 2. Remove the screws and remove the Touch Panel Fixing Metal and then remove the Front Glass from the Cabinet.
Attention when replacing Front Glass
•  Please wipe with the soft dry cloth (cotton, flannel) lightly, and do work after checking that neither dust nor a fingerprint is 
attached to glass.
• Please set Front Glass in the installation datum at the lower right of a Cabinet so that a label becomes the lower right.
41
TH-80LFB70U/TH-80LFB70W
7.18. Replacement of Front Glass
1. Remove the LCD Panel from the Cabinet.
(Refer to steps 1 to 9 in “7.16. Replacement of LCD Panel”)
2. Remove the screws and remove the Touch Panel Fixing Metal and then remove the Front Glass from the Cabinet.
Attention when replacing Front Glass
• Please wipe with the soft dry cloth (cotton, flannel) lightly, and do work after checking that neither dust nor a fingerprint is
attached to glass.
• Please set Front Glass in the installation datum at the lower right of a Cabinet so that a label becomes the lower right.
41
TH-80LFB70U/TH-80LFB70W
7.18. Replacement of Front Glass
1. Remove the LCD Panel from the Cabinet.
(Refer to steps 1 to 9 in “7.16. Replacement of LCD Panel”)
2. Remove the screws and remove the Touch Panel Fixing Metal and then remove the Front Glass from the Cabinet.
Attention when replacing Front Glass
• Please wipe with the soft dry cloth (cotton, flannel) lightly, and do work after checking that neither dust nor a fingerprint is
attached to glass.
• Please set Front Glass in the installation datum at the lower right of a Cabinet so that a label becomes the lower right.
41
TH-80LFB70U/TH-80LFB70W
7.18. Replacement of Front Glass
1. Remove the LCD Panel from the Cabinet.
(Refer to steps 1 to 9 in “7.16. Replacement of LCD Panel”)
2. Remove the screws and remove the Touch Panel Fixing Metal and then remove the Front Glass from the Cabinet.
Attention when replacing Front Glass
• Please wipe with the soft dry cloth (cotton, flannel) lightly, and do work after checking that neither dust nor a fingerprint is
attached to glass.
• Please set Front Glass in the installation datum at the lower right of a Cabinet so that a label becomes the lower right.
DIS-31
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
Quality Criterion of sticking felt
• When sticking felt, please do not stick on a TP PCB Cover Metal by any means.
•  When you stick felt, please stick not to overflow into the inner side of TP PCB Cover Metal under Front Glass. If it does not 
stick correctly, felt may be seen from the front.
42
TH-80LFB70U/TH-80LFB70W
Quality Criterion of sticking felt
• When sticking felt, please do not stick on a Touch Panel Fixing Metal by any means.
• When you stick felt, please stick not to overflow into the inner side of TP PCB Cover Metal under Front Glass. 
If it does not stick correctly, felt may be seen from the front.
TP PCB Cover Metal
There is a gap between the
TP PCB Cover Metal.
Do not stick a felt on the 
TP PCB Cover Metal.
DIS-32
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
Sticking position of felt
•  Stick the felt included with Front Glass along with a TP PCB Cover Metal with the center of a Touch Panel Fixing Metal as 
the starting point.
•  The felt width are two types. (TMKB316 / TMKB317 - Width 28mm, DPHS1004ZA / DPHS1005ZA - Width 10mm)
•  Paste a DPHS1004ZA/DPHS1005ZA on the TMKB316/TMKB317 as shown in the picture below.
1. Sticking position of TMKB316/TMKB317.
2. Sticking position of DPHS1004ZA/DPHS1005ZA.
0
0
0
0
0
0
0
0
DPHS1004ZA/X1(10x900x0.9)
DPHS1004ZA/X1(10x900x0.9)
DPHS1004ZA/X1(10x900x0.9)
DPHS1004ZA/X1(10x900x0.9)
DPHS1005ZA/X1(10x480x0.9)
DPHS1005ZA/X1(10x480x0.9)
DPHS1005ZA/X1(10x480x0.9)
DPHS1005ZA/X1(10x480x0.9)
Fit to the TP PCB COVER METAL.
6/6 
Fit to the TP PCB COVER METAL.
Fit to the TP PCB COVER METAL.
Fit to the 
TP PCB COVER METAL
.
0
0
0
0
TMKB316(28x915x0.9) 
0
0
0
0
02.5 
(02.5) 
(02.5) 
TMKB316(28x915x0.9) 
TMKB317(28x500x0.9) 
TMKB317(28x500x0.9) 
(02.5) 
Fit to the TP PCB COVER METAL.
Fit to the TP PCB COVER METAL.
Fit to the TP PCB COVER METAL.
Fit to the TP PCB COVER METAL.
Felt (TMKB316 / TMKB317)
Felt (DPHS1004ZA / DPHS1005ZA)
DIS-33
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
2.19. Replacement of IR Module, IR PCB Fixing Metal, and DEC LED Panel
 1.   Remove the LCD Panel from the Cabinet. (Refer to steps 1 to 9 in "2.17. Replacement of LCD Panel")
 2. Remove the Front Glass from the Cabinet. (Refer to step 2 in “2.18. Replacement of Front Glass”)
 3. Remove the screws and then remove the IR PCB Fixing Metal, IR-Borad and DEC LED Panel.
 4. Disconnect the FFC from the IR-Board.
Caution when attaching IR-Board
• As shown in the following figure, please let the FFC pass.
44
TH-80LFB70U/TH-80LFB70W
7.19. Replacement of V1-Board, V PCB Fixing Metal, and DEC LED Panel
1. Remove the LCD Panel from the Cabinet.
(Refer to steps 1 to 9 in “7.17. Replacement of LCD Panel”)
2. Remove the Front Glass from the Cabinet.
(Refer to step 2 in “7.18. Replacement of Front Glass”)
3. Remove the screws and then remove the V PCB Fixing Metal, V1-Borad and DEC LED Panel.
4. Disconnect the FFC from the V1-Board.
Caution when attaching V1-Board
• As shown in the following figure, please let the FFC pass.
44
TH-80LFB70U/TH-80LFB70W
7.19. Replacement of V1-Board, V PCB Fixing Metal, and DEC LED Panel
1. Remove the LCD Panel from the Cabinet.
(Refer to steps 1 to 9 in “7.17. Replacement of LCD Panel”)
2. Remove the Front Glass from the Cabinet.
(Refer to step 2 in “7.18. Replacement of Front Glass”)
3. Remove the screws and then remove the V PCB Fixing Metal, V1-Borad and DEC LED Panel.
4. Disconnect the FFC from the V1-Board.
Caution when attaching V1-Board
• As shown in the following figure, please let the FFC pass.
Page of 90
Display

Click on the first or last page to see other TH-80BF1U / TH-80BF1W / TH-80BF1E service manuals if exist.