DOWNLOAD Panasonic TH-55LF80U / TH-55LF80W (serv.man2) Service Manual ↓ Size: 6.54 MB | Pages: 56 in PDF or view online for FREE

Model
TH-55LF80U TH-55LF80W (serv.man2)
Pages
56
Size
6.54 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / FULL HD LCD DISPLAY
File
th-55lf80u-th-55lf80w-sm2.pdf
Date

Panasonic TH-55LF80U / TH-55LF80W (serv.man2) Service Manual ▷ View online

Model No.
 
TH-55LF80U
 TH-55LF80W
FULL HD LCD Display
ORDER NO. VED1511578CE
  
 WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It dose not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. 
vice or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
There are special components used in this equipment which are important for safety. These parts are marked by 7 in the schematic 
diagram, circuit board diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced 
with manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of 
manufacturer.
IMPORTANT SAFETY NOTICE
 このたびは、パナソニック製品をお買い上げいただき、
まことにありがとうございます。
 
● 
 取扱説明書をよくお読みのうえ、正しく安全にお使いください。
● 
 ご使用前に「安全上のご注意」(3 ~ 7 ページ)を必ずお読みください。
● 
 保証書は、「お買い上げ日・販売店名」などの記入を必ず確かめ、
取扱説明書とともに大切に保管してください。
● 
 この取扱説明書は、TH-43LFE8J(43V 型)、TH-48LFE8J(48V 型)、
TH-55LFE8J(55V 型)、TH-65LFE8J(65V 型)共用です。
● 
 製造番号は安全確保上重要なものです。
お買い上げの際は、製品本体と保証書の製造番号をお確かめください。
 
   保証書別添付
 
取扱説明書
 フルハイビジョン液晶ディスプレイ  業務用
 
 品番
 TH-65LFE8J
 (65V 型 )
 
 TH-55LFE8J
 (55V 型 )
 
 TH-48LFE8J
 (48V 型 )
 
 TH-43LFE8J
 (43V 型 )
 Q41G42M103713B
For replacemant parts and exploded view, refer to the separated manual "PARTS LIST". 
Rev.-1(2015-12)
2
PREFACE
<55LF80>
Table of Contents
1. Safety Precautions
2. Warning
3. Specifications
SECTION 1 SERVICE INFORMATION
1. Name of each part
2. Notes on Service
3. Service Mode
4. Troubleshooting Guide
SECTION 2 DISASSEMBLY PROCEDURES
1. Parts Locations
2. Parts Disassembly
3. Replacement of LCD Panel Module
SECTION 3 ADJUSTMENTS
1. Software Update Procedures
2. USB Cloning
3. Serial no. writing
SECTION 4 DIAGRAMS
1. Block Diagrams
3
PREFACE
<55LF80>
1. Safety Precautions
3
TH-50LFC70U/TH-50LFC70W
1 Safety Precautions
1.1. General Guidelines
1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials.
2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the
wires have been broken or disconnected, do not attempt to repair or re-wire the units. Replace the entire wiring unit instead.
3. When conducting repairs and servicing, do not twist the Fasten connectors but plug them straight in or unplug them straight
out.
4. When servicing, observe the original lead dress. If a short circuit is found, replace all parts have been overheated or damaged
by the short circuit.
5. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
6. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.2. Touch-Current Check (for TH-50LFC70U)
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground
such as a water pipe, as shown in Figure 1.
3. Use Leakage Current Tester (Simpson 228 or equivalent) to measure the potential across the measuring network.
4. Check each exposed metallic part, and measure the voltage at each point.
5. Reserve the AC plug in the AC outlet and repeat each of the above measure.
6. The potential at any point (TOUCH CURRENT) shall not exceed 0.5 MIU.
7. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be
repaired and rechecked before it is returned to the customer.
Figure 1
1.1. General Guidelines
1.2. Touch current check (for TH-55LF80U)
4
PREFACE
<55LF80>
4
TH-50LFC70U/TH-50LFC70W
1.3. Touch-Current Check (for TH-50LFC70W)
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground
such as a water pipe, as shown in Figure 1.
3. Use Leakage Current Tester (Simpson 228 or equivalent) to measure the potential across the measuring network.
4. Check each exposed metallic part, and measure the voltage at each point.
5. Reserve the AC plug in the AC outlet and repeat each of the above measure.
6. The potential at any point (TOUCH CURRENT) expressed as voltage U
1
 and U
2
, does not exceed the following values:
For a. c.: U
1
 = 35 V (peak) and U
2
 = 0.35 V (peak);
For d. c.: U
1
 = 1.0 V,
Note:
The limit value of U
2
 = 0.35 V (peak) for a. c. and U
1
 = 1.0 V for d. c. correspond to the values 0.7 mA (peak) a. c. and 2.0
mA d. c.
The limit value U
1
 = 35 V (peak) for a. c. correspond to the value 70 mA (peak) a. c. for frequencies greater than 100 kHz.
7. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be
repaired and rechecked before it is returned to the customer.
Figure 1
1.2. Touch current check (for TH-55LF80W)
Page of 56
Display

Panasonic TH-55LF80U / TH-55LF80W (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Panasonic TH-55LF80U / TH-55LF80W (serv.man2) Service Manual ↓ Size: 6.54 MB | Pages: 56 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic TH-55LF80U / TH-55LF80W (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic TH-55LF80U / TH-55LF80W (serv.man2) TV. Information contained in Panasonic TH-55LF80U / TH-55LF80W (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.