Panasonic TH-49AF1U / TH-49AF1W (serv.man2) Service Manual ▷ View online
6
PREFACE
<49AF1>
6
TH-50LFC70U/TH-50LFC70W
2.2. About lead free solder (PbF)
Note: Lead is listed as (Pb) in the periodic table of elements.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair work, we’d
suggest the use of Pb free solder as well, although Pb solder may be used.
suggest the use of Pb free solder as well, although Pb solder may be used.
Caution
• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30~40 °C) higher. Please
use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).
• Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb sol-
der. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
der. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
• After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the
opposite side. (see figure below)
Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. How-
ever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
ever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
2.2. About lead free solder (PbF)
7
PREFACE
<49AF1>
3. Specifications
113
English
Specifications
Model No.
55-inch model
: TH-55AF1U
49-inch model
: TH-49AF1U
42-inch model
: TH-42AF1U
55-inch model
: TH-55AF1W
49-inch model
: TH-49AF1W
42-inch model
: TH-42AF1W
Power Consumption
55-inch model
190 W
49-inch model
175 W
42-inch model
155 W
Power off condition
0.3 W
Stand-by condition
(when [OpenPort PLATFORM standby] is set to [Off])
(when [OpenPort PLATFORM standby] is set to [Off])
0.5 W
Stand-by condition
(when [OpenPort PLATFORM standby] is set to [On]
(when [OpenPort PLATFORM standby] is set to [On]
(Factory default))
approx. 20 W
LCD Display panel
55-inch model
55-inch IPS panel (Edge LED backlight), 16:9 aspect
ratio
49-inch model
49-inch IPS panel (Edge LED backlight), 16:9 aspect
ratio
42-inch model
42-inch IPS panel (Edge LED backlight), 16:9 aspect
ratio
Screen size
55-inch model
1 209 mm (W) × 680 mm (H) × 1 387 mm (diagonal) /
47.6” (W) × 26.7” (H) × 54.6” (diagonal)
49-inch model
1 073 mm (W) × 604 mm (H) × 1 232 mm (diagonal) /
42.2” (W) × 23.7” (H) × 48.5” (diagonal)
42-inch model
927 mm (W) × 521 mm (H) × 1 064 mm (diagonal) /
36.5” (W) × 20.5” (H) × 41.9” (diagonal)
Number of pixels
2 073 600 (1 920 (W) × 1 080 (H))
Dimensions (W × H × D)
55-inch model
1 229 mm × 699 mm × 72 mm (57 mm: without
handles) /
48.4” × 27.6” × 2.8” (2.3”: without handles)
49-inch model
1 093 mm × 623 mm × 72 mm (57 mm: without
handles) /
43.1” × 24.6” × 2.8” (2.3”: without handles)
42-inch model
947 mm × 541 mm × 72 mm (57 mm: without
handles) /
37.3” × 21.3” × 2.8” (2.3”: without handles)
Mass
55-inch model
approx. 25.0 / 55.2 lbs net
49-inch model
approx. 19.3 / 42.6 lbs net
42-inch model
approx. 15.6 / 34.4 lbs net
Power source
TH-55AF1U, TH-49AF1U, TH-42AF1U:
110 - 127V (110-127V alternating current), 50/60Hz
TH-55AF1W, TH-49AF1W, TH-42AF1W:
220 - 240V (220-240V alternating current),
50/60Hz
Operating condition
Temperature
0 °C to 40 °C (32 °F to 104 °F)*
1
Humidity
20 % to 80 % (no condensation)
Storing condition
Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Humidity
20 % to 80 % (no condensation)
OpenPort PLATFORM system
OS
Android 4.4.3
CPU
Cortex-A9, 1.0 GHz (quad)
Memory
RAM 1 GB / ROM 8 GB
8
PREFACE
<49AF1>
English
114
Supported codec
Video: MPEG4, H.264/AVC, H.263, MotionJPEG,
MPEG2, WMV, VP8
Audio: MP3, AAC, WMA, AMR, Ogg Vorbis
OpenPort PLATFORM part
USB (OpenPort PLATFORM)
USB connector × 3, TYPE A
USB2.0
USB2.0
Micro-USB
Micro-USB connector, Micro-B
USB2.0
USB2.0
microSD card slot
microSD, microSDHC
LAN
For RJ45 network connections, compatible with
PJLink
Communication method:
Communication method:
RJ45 10BASE-T/100BASE-TX/1000BASE-T
Wireless LAN module
IEEE 802.11a/b/g/n
Connection terminals
HDMI 1
HDMI 2
HDMI 2
TYPE A Connector*
2
× 2
Audio signal:
Linear PCM (sampling frequencies - 48 kHz,
44.1 kHz, 32 kHz)
DVI-D IN
DVI-D 24 Pin:
Compliance with DVI Revision 1.0
Content Protection:
Compatible with HDCP 1.1
DVI-D OUT
DVI-D 24 Pin:
Compliance with DVI Revision 1.0
Content Protection:
Compatible with HDCP 1.1
COMPONENT/RGB IN
Y/G
BNC terminal 1.0 Vp-p (75 ) (with sync signal)
P
B
/C
B
/B
BNC terminal 0.7 Vp-p (75 ) (without sync
signal)
P
R
/C
R
/R
BNC terminal 0.7 Vp-p (75 ) (without sync
signal)
VIDEO IN
VIDEO
BNC terminal 1.0 Vp-p (75 )
Also used as Y/G terminal
Also used as Y/G terminal
PC IN
Mini D-sub 15 Pin (Compatible with DDC2B)
Y/G:
Y/G:
1.0 Vp-p (75 ) (with sync signal)
0.7 Vp-p (75 ) (without sync signal)
0.7 Vp-p (75 ) (without sync signal)
P
B
/C
B
/B:
0.7 Vp-p (75 ) (without sync signal)
P
R
/C
R
/R:
0.7 Vp-p (75 ) (without sync signal)
HD/VD:
1.0 - 5.0 Vp-p (high impedance)
AUDIO1 IN
Stereo mini jack (M3) 0.5 Vrms
Shared with DVI-D IN and PC IN
Shared with DVI-D IN and PC IN
AUDIO2 IN
Stereo mini jack (M3) 0.5 Vrms
Shared with COMPONENT/RGB IN and VIDEO IN
Shared with COMPONENT/RGB IN and VIDEO IN
AUDIO OUT
Stereo mini jack (M3) 0.5 Vrms
Output: Variable (-∞ to 0 dB)
Output: Variable (-∞ to 0 dB)
(1 kHz 0 dB input, 10 k load)
USB
USB connector, TYPE A
DC 5V / 1A (USB 3.0 is not supported.)
DC 5V / 1A (USB 3.0 is not supported.)
Control terminals
SERIAL IN
External Control Terminal
D-sub 9 Pin:
D-sub 9 Pin:
RS-232C compatible
SERIAL OUT
External Control Terminal
D-sub 9 Pin:
D-sub 9 Pin:
RS-232C compatible
IR IN
Stereo mini jack (M3)
IR OUT
Stereo mini jack (M3)
9
PREFACE
<49AF1>
115
English
Sound
Built-in speakers
80 mm × 30 mm × 2 pcs
Audio Output
20 W [10 W + 10 W] (10 % THD)
Remote Control Transmitter
Power source
DC 3 V (battery (AAA/R03/UM4 type) × 2)
Operating range
Approx. 7 m (22.9 ft)
(when operated directly in front of remote control
(when operated directly in front of remote control
sensor)
Mass
Approx. 63 / 2.22 oz (including batteries)
Dimensions (W × H × D)
44 mm × 105 mm × 20.5 mm /
1.74” × 4.14” × 0.81”
*
1: Environmental temperature to use this unit at high
altitudes (1 400 m (4 593 ft) and higher and below
2 800 m (9 186 ft) above sea level): 0 °C to 35 °C
(32 °F to 95 °F)
*
2: VIERA LINK is not supported.
Note
●
Design and specifications are subject to change
without notice. Mass and dimensions shown are
approximate.
Click on the first or last page to see other TH-49AF1U / TH-49AF1W (serv.man2) service manuals if exist.