Panasonic TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS Service Manual ▷ View online
6 Service Hint
9
TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS
7 Disassembly / Exchange
7.1. Before exchanging the board
· When exchanging the board, there are two kinds of the board, the board which can be exchange in condition the
pedestal(Option) is installed in the LCD set and the board which cannot be exchange if the pedestal(Option) is not removed
from the LCD set.
from the LCD set.
(Refer to the following list of the the board removal category.)
7.1.1. Board removal category
the board which can be exchange in
condition the pedestal(Option) is installed
in the LCD set.
condition the pedestal(Option) is installed
in the LCD set.
the board which cannot be exchange if
the pedestal(Option) is not removed
from the LCD set.
the pedestal(Option) is not removed
from the LCD set.
[ Z ] Audio out, DC-DC converter Board
—
[ H3 ] Speaker terminal Board
—
FAN
—
[ P ] Power supply Board
—
[ V ] Operation SW Board
—
[ S ] Power switch Board
—
[ R ] Power indicator & Remote receiver Board
—
[ HB ] BNC Composite/Component Video Board
—
[ HA ] BNC Component Video Board
—
[ J ] Slot Interface & SYNC processor Board
—
[ HX ] PC_type_Input terminal Board
—
[ D ] Digital Signal Processor Board
—
[ PF ] Line filter Board
×
LCD module(finished)
×
· [
]: Enable to exchange
· [ × ]: Disable to exchange
10
TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS
7.2. How to exchange the Board in condition the Pedestal (Option) is
installed in the LCD set.
The following write explains how to exchange in condition the Speaker (Option) is installed in the LCD set.
7.2.1. Removal of the Speaker (L, R) (Option)
(1) Remove the Speaker cable (L, R).
(2) Remove the each of 2 Speaker fixed screws.
(3) Remove the Speaker (L, R)
(3) Remove the Speaker (L, R)
7.2.2. Removal of the Rear Cover
(1) Remove the 17 screws (A) of the Rear Cover .
Caution:
Remove the Handles at that time.
(2) Remove the 10 screws (B) of the Rear Cover.
(3) Remove the 4 screws (C) of the Pedestal (Option).
(4) Remove the Rear Cover .
(3) Remove the 4 screws (C) of the Pedestal (Option).
(4) Remove the Rear Cover .
11
TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS
7.2.3. Exchange of the Z-Board
(1) Disconnect the couplers (Z5, Z6, Z7, Z8, Z10, Z30, Z32).
(2) Remove the 4 screws of the Z-Board and then
remove the Z-Board.
7.2.4. Exchange of the H3-Board (R)
(1) Remove the 2 screws of the H3-Board (R) fixed angle.
(2) Disconnect the coupler (H37).
(3) Remove the 3 screws (D) and then remove the H3-Board (R).
(4) Exchange the new H3-Board.
(3) Remove the 3 screws (D) and then remove the H3-Board (R).
(4) Exchange the new H3-Board.
12
TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS
Click on the first or last page to see other TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS service manuals if exist.