Panasonic CT-34WDM60 Service Manual ▷ View online
- 8 -
Inspection procedure using the self-check function for the power supply system
Caution items at the time of inspection
•
Always pull the plug of the AC code before performing a continuity check.
•
When solder has been removed or a connector has been pulled, please restore the original condition after each inspection.
•
When the tester has been set to
Ω
a voltage with the opposite polarity of the voltage impressed when the tester is used as a
voltmeter is put out from the tester, and for inspection of a load short-circuit, connect the tester rod on the plus side (red) to
earth and the tester rod on the minus side (black) to the power supply line.
earth and the tester rod on the minus side (black) to the power supply line.
•
Generally, a value of 10
Ω
or less can be considered as a load short-circuit.
The main power/video reception LED does not light.
W
Load
BLACK
RED
The main power/video reception
LED does not light even when
the main power switch is set to ON.
LED does not light even when
the main power switch is set to ON.
Is the fuse F801 blown?
Perform short-circuit inspection
for the AC 120 V line
(T801, D841 to D844, C842, etc.).
Exchange the fuse F801.
for the AC 120 V line
(T801, D841 to D844, C842, etc.).
Exchange the fuse F801.
Is a voltage of 10 V
supplied to pin 1 of the
connector E15?
supplied to pin 1 of the
connector E15?
Is a voltage of 5 V
supplied to pin 4
of IC3111?
supplied to pin 4
of IC3111?
Exchange U-Module
Unsolder pin 1
of the connector E15
and check if a voltage of
10 V is supplied to pin 1
of the connector
D15.
D841 to D844, C842
short-circuit inspection,
exchange
short-circuit inspection,
exchange
IC3111, C3124 short-circuit
inspection, exchange
inspection, exchange
IC3111 open inspection, C3071,
C3098 short-circuit inspection,
exchange
C3098 short-circuit inspection,
exchange
Yes
Yes
Yes
No
No
No
No
Yes
& !"#$
- 9 -
Main power/video reception LED flashes once
Main power/video reception LED flashes twice
Main power/video reception LED flashes five times
When the main power switch is
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes once.
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes once.
Q509, Q510 short-circuit inspection,
simultaneous exchange
Q612, Q502 short-circuit and open inspection
D506, D404, Q401 short-circuit inspection
IC608, IC607, IC402 inspection
T551 inspection
Exchange
simultaneous exchange
Q612, Q502 short-circuit and open inspection
D506, D404, Q401 short-circuit inspection
IC608, IC607, IC402 inspection
T551 inspection
Exchange
When the main power switch is
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes twice.
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes twice.
IC881 open inspection
Q890 short-circuit inspection
Exchange
Q890 short-circuit inspection
Exchange
When the main power switch is
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes five times.
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes five times.
Perform a
continuity check
between pins 1 and 2 of
the connector E13 and earth
and check for a
short-circuit.
Perform a
continuity check
between pin 2 of IC3109
and earth and check for
a short-circuit.
IC3109 open inspection
IC3110 open inspection
Q3023 short-circuit inspection
D3039, D3050, D3022, D3035, D3011
short-circuit inspection
Exchange
IC3110 open inspection
Q3023 short-circuit inspection
D3039, D3050, D3022, D3035, D3011
short-circuit inspection
Exchange
IC3109, C3117 short-circuit inspection
IC3110, C3069 short-circuit inspection
Exchange
IC3110, C3069 short-circuit inspection
Exchange
IC3109, D3017 short-circuit inspection
IC3061, D3047, C3061 short-circuit inspection
J-Module and HM-Module short-circuit
inspection Exchange
IC3061, D3047, C3061 short-circuit inspection
J-Module and HM-Module short-circuit
inspection Exchange
Short-circuit
Short-circuit
No short-circuit
No short-circuit
* Flashing is done six times in case of
a short-circuit on the rectification side.
a short-circuit on the rectification side.
' !"#$
- 10 -
Main power/video reception LED flashes three times
When the main power switch is
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes three times.
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes three times.
Pull the
connector D1, perform
a continuity check between
pins 1 and 2 of the connector
E11 and earth, and
check for
a short-circuit.
Unsolder
pins 2 and 3 of the
connector E11,
perform a continuity check between
pins 2 and 3 of the connector
D11 and earth, and check
for a short-circuit.
Perform
a continuity check
between pin 3 of IC3107
and earth, and check
for a short-circuit.
Is a voltage of about 4 V
supplied to pin 66
of U-Module?
supplied to pin 66
of U-Module?
Q879 open inspection
Q881, C870 short-circuit inspection
RL879 inspection
IC3107 open inspection
Exchange
Q881, C870 short-circuit inspection
RL879 inspection
IC3107 open inspection
Exchange
IC881, D881, C882
short-circuit inspection
Exchange
short-circuit inspection
Exchange
IC3107, C3051 short-circuit inspection
DP-Module, and GY-Module short-circuit inspection
C3021, C3032 short-circuit inspection
Exchange
DP-Module, and GY-Module short-circuit inspection
C3021, C3032 short-circuit inspection
Exchange
IC3107, C3048, C3088 short-circuit inspection
X, U, DP and GY-Module short-circuit inspection
C3095, C3058, C3037 short-circuit inspection
Exchange
X, U, DP and GY-Module short-circuit inspection
C3095, C3058, C3037 short-circuit inspection
Exchange
Exchange the U-Module.
Short-circuit
Short-circuit
Short-
circuit
circuit
No short-circuit
No short-circuit
No short-circuit
Yes
No
(
!"#$
- 11 -
Main power/video reception LED flashes four times
When the main power switch is
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes four times.
set to ON, the main power/video
reception LED lights in the order of
red -> green -> red
and flashes four times.
Perform
a continuity check
between pins 7 and 8 of the connector
E12 and earth, and check
for a short-circuit.
Unsolder
pins7 and 8 of the
connector E12, perform
a continuity check between pins
7 and 8 of the connector D12
and earth, and check for
a short-circuit.
Perform
a continuity check
between collectorand emitter
of Q551, and check
for a short-circuit.
D861, C861 short-circuit inspection
IC881 open inspection
C958 short-circuit inspection
Exchange
IC881 open inspection
C958 short-circuit inspection
Exchange
Q500 short-circuit inspection
Exchange
Exchange
Q551 short-circuit inspection
D509 short-circuit inspection
Exchange
D509 short-circuit inspection
Exchange
Perform
a continuity check
between pins 3 and 4 of the connector
E14 and earth, and check for
a short-circuit.
Perform
a continuity check
between pin 8 of the connector
E13 and earth, and check for
a short-circuit.
Unsolder
pins 3 and 4 of the
connector E14, perform
a continuity check between pins
3 and 4 of the connector D14
and earth, and check for
a short-circuit.
IC2301, D3016, C3009
short-circuit inspection
Exchange
short-circuit inspection
Exchange
D867 short-circuit inspection
Exchange
Exchange
D866 short-circuit inspection
Exchange
Exchange
Unsolder
pin 8 of the connector
E13, perform a continuity check
between pin 8 of the connector D13
and earth, and check for
a short-circuit.
IC451, C654, C626 short-circuit inspection
Q623 short-circuit inspection
Simultaneous exchange
Q623 short-circuit inspection
Simultaneous exchange
Short-circuit
Short-circuit
Short-circuit
Short-circuit
Short-circuit
Short-circuit
Short-
circuit
circuit
No short-circuit
No short-circuit
No short-circuit
No short-circuit
No short-circuit
No short-circuit
No short-circuit
Continued on the next page
(( !"#$
Click on the first or last page to see other CT-34WDM60 service manuals if exist.