Panasonic CT-34WDM60 Service Manual ▷ View online
- 45 -
•
"MOIRE" adjustment
→
When the "V-SIZE" is adjusted, moire may occur on the
screen. In such a case, press the "
,
" buttons on the
remote control to reduce the moire.
→
There is no offset for the moire adjustment. When there is
visible moire for the image, perform individual adjustment.
(Adjustment is possible only in NTSC "FULL", "ZOOM"
mode)
visible moire for the image, perform individual adjustment.
(Adjustment is possible only in NTSC "FULL", "ZOOM"
mode)
NTSC FULL WARM
DEF
MOIRE
DEF
MOIRE
IIC
Focus adjustment
(1) Receive a 1080i.
(2) Enter into service adjustment mode and select "DEF ADJ"
in IIC mode.
(3) Press the button "
" on the remote control and receive
the built-in cross-hatch pattern of this unit.
Note: Use 10 key Remocon
(4) Adjust the F1 control of the flyback transformer so that the
focus is balanced for the center line (vertical) of the cross-
hatch pattern and the vertical lines two lines from the
edge.
hatch pattern and the vertical lines two lines from the
edge.
(5) Adjust the F2 control of the flyback transformer so that the
center lines (horizontal) of the cross-hatch pattern are bal-
anced well.
anced well.
(6) Repeat the adjustments (4) and (5) until an optimum is
obtained.
(7) Receive an NTSC signal in "FULL" mode and confirm the
image.
NTSC FULL WARM
DEF ADJ
H-POSITION
DEF ADJ
H-POSITION
IIC
F2
F1
F1
F2
FOCUS
VOLUME 2
VOLUME 2
FOCUS
VOLUME 1
VOLUME 1
SCREEN
VOLUME
VOLUME
F1
S1
8
!"#$
- 46 -
Memo
!"#$
- 46 -
Memo
!"#$
- 46 -
Memo
!"#$