Panasonic KX-TG8288UAT / KX-TG8287UAT / KX-TGA828UAT / KX-TGA828RUT Service Manual ▷ View online
17
KX-TG8288UAT/KX-TG8287UAT/KX-TGA828UAT/KX-TGA828RUT
5 Location of Controls and
Components
5.1.
Controls
5.1.1.
Base Unit
5.1.2.
Handset
18
KX-TG8288UAT/KX-TG8287UAT/KX-TGA828UAT/KX-TGA828RUT
6 Installation Instructions
6.1.
Connections
6.1.1.
Connecting the AC Adaptor
Note:
• Never install telephone wiring during a lightning storm.
• The AC adaptor must remain connected at all times. (It is
• The AC adaptor must remain connected at all times. (It is
normal for the adaptor to feel warm during use.)
• The AC adaptor should be connected to a vertically oriented
or floor-mounted AC outlet. Do not connect the AC adaptor
to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
Location
• For maximum distance and noise-free operation, place your
base unit:
- away from electrical appliances such as TVs, radios, per-
sonal computers, or other phones.
- in a convenient, high, and central location.
6.1.2.
Connecting the Telephone Line
Cord
Cord
Refer to one of the following methods depending on your situa-
tion:
tion:
- To connect to a 2-line telephone jack
- To connect to 2 single-line telephone jacks
- If you use the unit as a single-line telephone only
- To connect to 2 single-line telephone jacks
- If you use the unit as a single-line telephone only
Connect the telephone line cord until it clicks into the base unit
and telephone line jack.
Important:
and telephone line jack.
Important:
If you use a telephone line cord which is not supplied, the
unit may not work properly.
unit may not work properly.
To connect to a 2-line telephone jack
To connect to 2 single-line telephone jacks
If you use the unit as a single-line telephone only
19
KX-TG8288UAT/KX-TG8287UAT/KX-TGA828UAT/KX-TGA828RUT
6.1.3.
Connecting a Communication
Device
Device
You can connect a communication device (computer, modem,
fax, answering machine, etc.) through this unit using the DATA
jack.
Example:
fax, answering machine, etc.) through this unit using the DATA
jack.
Example:
• If the communication device is in use, use line 2 to make or
answer other calls. Otherwise the communication device
may not operate properly.
may not operate properly.
• If you connect the unit to 2 single-line telephone jacks, pre-
pare an extra telephone line cord for the DATA jack.
6.2.
Battery
6.2.1.
Battery Installation and Replace-
ment
ment
Important:
• Use only the supplied rechargeable batteries HHR-4EPT.
• USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
• Ensure correct polarities ( ,
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
• Ensure correct polarities ( ,
) when installing the batter-
ies.
• Wipe the battery ends ( ,
) with a dry cloth.
• When installing the batteries, avoid touching the battery
ends ( ,
) or the unit contacts.
• When replacing batteries, we recommend using the Pana-
sonic rechargeable batteries P03P.
See For Service Hint (P.30).
20
KX-TG8288UAT/KX-TG8287UAT/KX-TGA828UAT/KX-TGA828RUT
6.2.2.
Battery Charge
Place the handset on the base unit or charger for about 7
hours before initial use.
When charging, “
hours before initial use.
When charging, “
” will be displayed.
When the batteries are fully charged, “
” will
be displayed.
• The charge indicator lights up when the handset is placed on
the base unit or charger.
Note:
• It is normal for the handset to feel warm during charging.
• If you want to use the unit immediately, charge the batteries
• If you want to use the unit immediately, charge the batteries
for at least 15 minutes.
• Clean the charge contacts of the handset, base unit, and
charger with a soft, dry cloth. Clean if the unit is subject to
the exposure of grease, dust, or high humidity.
the exposure of grease, dust, or high humidity.
6.2.3.
Battery Level
6.2.4.
Panasonic Ni-MH Battery Perfor-
mance (supplied batteries)
mance (supplied batteries)
Note:
• It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a
few complete cycles of charge/discharge (use).
few complete cycles of charge/discharge (use).
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
(standby).
• Even after the handset is fully charged, the handset can be
left on the base unit or charger without any ill effect on the
batteries.
batteries.
• The battery level may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
base unit or charger and let it charge for at least 7 hours.
base unit or charger and let it charge for at least 7 hours.
Click on the first or last page to see other KX-TG8288UAT / KX-TG8287UAT / KX-TGA828UAT / KX-TGA828RUT service manuals if exist.