DOWNLOAD Panasonic KX-TG8011CAC / KX-TG8011CAS / KX-TG8011CAT / KX-TG8012CAS / KX-TG8012CAT / KX-TGA800RUC / KX-TGA800RUS / KX-TGA800RUT Service Manual ↓ Size: 2.68 MB | Pages: 96 in PDF or view online for FREE

Model
KX-TG8011CAC KX-TG8011CAS KX-TG8011CAT KX-TG8012CAS KX-TG8012CAT KX-TGA800RUC KX-TGA800RUS KX-TGA800RUT
Pages
96
Size
2.68 MB
Type
PDF
Document
Service Manual
Brand
Device
Telephone / TELEPHONE EQUIPMENT
File
kx-tg8011cac-kx-tg8011cas-kx-tg8011cat-kx-tg8012ca.pdf
Date
PREV: Panasonic KX-TG7851UAB / KX-TG7851UAH / KX-TG7861UAB / KX-TGA785RUB / KX-TGA785RUH (serv.man2) Service Manual / Supplement

Panasonic KX-TG8011CAC / KX-TG8011CAS / KX-TG8011CAT / KX-TG8012CAS / KX-TG8012CAT / KX-TGA800RUC / KX-TGA800RUS / KX-TGA800RUT Service Manual ▷ View online

53
KX-TG8011CAC/KX-TG8011CAS/KX-TG8011CAT/KX-TG8012CAS/KX-TG8012CAT/KX-TGA800RUC/KX-TGA800RUS/KX-TGA800RUT
10.1.2. Handset
54
KX-TG8011CAC/KX-TG8011CAS/KX-TG8011CAT/KX-TG8012CAS/KX-TG8012CAT/KX-TGA800RUC/KX-TGA800RUS/KX-TGA800RUT
10.1.3. Charger Unit
55
KX-TG8011CAC/KX-TG8011CAS/KX-TG8011CAT/KX-TG8012CAS/KX-TG8012CAT/KX-TGA800RUC/KX-TGA800RUS/KX-TGA800RUT
10.2. How to Replace the Handset LCD
56
KX-TG8011CAC/KX-TG8011CAS/KX-TG8011CAT/KX-TG8012CAS/KX-TG8012CAT/KX-TGA800RUC/KX-TGA800RUS/KX-TGA800RUT
11 Measurements and Adjustments
11.1. The Setting Method of JIG (Base Unit)
11.1.1. Preparation
11.1.1.1. Equipment Required
• DECT tester: Rohde & Schwarz, CMD 60 is recommended.
• Frequency counter: It must be precise enough to measure intervals of 1 Hz (precision; ±4 ppm).
Hewlett Packard, 53131A is recommended.
• Digital multi-meter (DMM): it must be able to measure voltage and current.
• Oscilloscope
11.1.1.2. JIG and PC
• Serial JIG
JIG Cable: PQZZ1CD300E*
• PC which runs in DOS mode
• Batch file CD-ROM for setting: PNZZTG8011CA
Note:
*: If you have the JIG Cable for TCD500 series
(PQZZ1CD505E), change the following values of resis-
tance. Then you can use it as a JIG Cable for both TCD300
and TCD500 series. (It is an upper compatible JIG Cable.)
11.1.2. PC Setting
11.1.2.1. Connections
 Connect the AC adaptor to DC-JACK (base unit).
 Connect the JIG Cable GND (black) to GND.
 Connect the JIG Cable RX (red) to URX and TX (yellow) to UTX.
Note:
*: COM port names may vary depending on what your PC calls it.
Resistor
Old value (k
Ω) New value (kΩ)
R2
22
3.3
R3
22
3.3
R4
22
4.7
R7
4.7
10
Page of 96
Display

Click on the first or last page to see other KX-TG8011CAC / KX-TG8011CAS / KX-TG8011CAT / KX-TG8012CAS / KX-TG8012CAT / KX-TGA800RUC / KX-TGA800RUS / KX-TGA800RUT service manuals if exist.

RANDOM: