Panasonic KX-TG5512RUB / KX-TG5513RUB / KX-TGA550RUB / KX-TGA551RUB Service Manual / Supplement ▷ View online
3
KX-TG5512RUB/KX-TG5513RUB/KX-TGA550RUB/KX-TGA551RUB
1.2.
Cabinet and Electrical Parts (Handset)
Note:
(*1) This cable is fixed by welding.
(*2) The rechargeable Ni-MH battery P03P or HHR-4NGE is available through sales route of Panasonic.
(*3) Attach the spacer (No. 116) to the exact location described <fig.1>.
(*4) Attach the DOUBLE-SIDED TAPE to the exact parts refer to <fig.2>.
(*5) This SPACER is cut from the excess parts of SPACER (No.108). Attach this SPACER to the exact location described
<fig.3>.
(*2) The rechargeable Ni-MH battery P03P or HHR-4NGE is available through sales route of Panasonic.
(*3) Attach the spacer (No. 116) to the exact location described <fig.1>.
(*4) Attach the DOUBLE-SIDED TAPE to the exact parts refer to <fig.2>.
(*5) This SPACER is cut from the excess parts of SPACER (No.108). Attach this SPACER to the exact location described
<fig.3>.
103 (*4)
101
104
105
E104
E102
E105
E111
E101(*1)
109
E106
E108
102
E103
E107
E109
E110
MIC100
107
103 (*4)
103 (*4)
106
110
B
PCB100
108
112
113
117
(*2)
115
116 (*3)
B
114
111
Ref.No.
Ǿ
2
8 mm
B
Figure
Spacer (No.116)
Battery cover
Put it in the center.
Stick it between
ribs.
ribs.
Double-sided tape (No.103)
< Fig.1 >
< Fig.1 >
< Fig.2 >
108 (*5)
Stick it as shown figure.
< Fig.3 >
Stick to it on
the Rib center
of the above
figure.
Cover the Rib
completely.
the Rib center
of the above
figure.
Cover the Rib
completely.
RIB
Put it along this line.
Stick it as shown figure.
4
KX-TG5512RUB/KX-TG5513RUB/KX-TGA550RUB/KX-TGA551RUB
1.3.
Cabinet and Electrical Parts (Charger Unit)
B
200
200-1
200-3
200-4
200-2
PCB200
Ref.No.
Ǿ
2
8 mm
B
Figure
B
5
KX-TG5512RUB/KX-TG5513RUB/KX-TGA550RUB/KX-TGA551RUB
1.4.
Accessories
A2
A1
6
KX-TG5512RUB/KX-TG5513RUB/KX-TGA550RUB/KX-TGA551RUB
1.5.
Replacement Part List
1. RTL (Retention Time Limited)
Note:
The “RTL” marking indicates that its Retention Time is
Limited.
When production is discontinued, this item will
continue to be available only for a specific period of
time. This period of time depends on the type of item,
and the local laws governing parts and product
retention.
At the end of this period, the item will no longer be
available.
Limited.
When production is discontinued, this item will
continue to be available only for a specific period of
time. This period of time depends on the type of item,
and the local laws governing parts and product
retention.
At the end of this period, the item will no longer be
available.
2. Important safety notice
Components identified by the
mark indicates special
characteristics important for safety. When replacing any
of these components, only use specified manufacture’s
parts.
of these components, only use specified manufacture’s
parts.
3. The S mark means the part is one of some identical parts.
For that reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column
shows quality of the material and a flame resisting grade
about plastics.
about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms ( ) k=1000 , M=1000 k
All capacitors are in MICRO FARADS ( F)p=
All resistors are in ohms ( ) k=1000 , M=1000 k
All capacitors are in MICRO FARADS ( F)p=
F
*Type & Wattage of Resistor
1.5.1.
Base Unit
1.5.1.1.
Cabinet and Electrical Parts
1.5.1.2.
Main P.C.Board Parts
Note:
(*1) When replacing IC7, IC401 or X1, make the adjustment
using PNZZTG5511RU.
(*2) When removing E1, use special tools (ex. Hot air
disordering tool).
(*3) Backside of this IC has a ground plate.
(*4) Supplied IC is Flat Package Type.
using PNZZTG5511RU.
(*2) When removing E1, use special tools (ex. Hot air
disordering tool).
(*3) Backside of this IC has a ground plate.
(*4) Supplied IC is Flat Package Type.
Safety
Ref.
No.
Part No.
Part Name & Description Remarks
1
PNGP1107Z1
PANEL, UPPER
ABS-HB
2
K2ECYZ000001
JACK, DC
3
PQJJ1T039M
JACK, MODULAR
4
PNKM1156Z1
CABINET BODY
ABS-HB
5
PNKE1073Z1
CASE, CHARGE TERMINAL
PS-HB
6
PNJT1050X
CHARGE TERMINAL
7
PNLA1030Z
ANTENNA
8
PNYE1034Y
SPACER, ANTENNA
9
PNKF1112Z1
CABINET COVER
PS-HB
10
PNHA1013Z
RUBBER PARTS,FOOT CUSH-
ION
Safety
Ref.
No.
Part No.
Part Name & Description Remarks
PCB1
PNWPG5511RUH
MAIN P.C.BOARD ASS'Y
(RTL)
(ICs)
IC3
C0DBAGZ00026
IC
IC7
C1CB00002906 IC
(BBIC(FLASH))
(*1)(*3)(*4)
IC401 PNWITG6511EH
IC (EEPROM) (*1)
IC801 C1CB00001842
IC (*3)
(TRANSISTORS)
IC2
B1ZBZ0000065
TRANSISTOR(SI)
Q2
B1ABCE000009
TRANSISTOR(SI)
Q3
B1ACGP000007
TRANSISTOR(SI)
Q4
PQVTBF822T7
TRANSISTOR(SI)
Q5
2SD0874AS
TRANSISTOR(SI)
Q8
B1ADGE000004
TRANSISTOR(SI)
Q9
B1ADGE000004
TRANSISTOR(SI)
Q10
UNR92A6J0L
TRANSISTOR(SI)
Q24
UN9219J TRANSISTOR(SI) S
Q25
UN9219J TRANSISTOR(SI) S
(DIODES)
D3
B0EDER000009
DIODE(SI)
D10
MA8033 DIODE(SI) S
D21
PQVDRLZ20A
DIODE(SI) S
DA801 B0DDCD000001
DIODE(SI)
DA802 B0DDCD000001
DIODE(SI)
(COILS)
L1
PQLQXF330K
COIL S
L2
PQLQXF330K
COIL S
L3
G1C220M00037
COIL S
L801
G1C27NJ00010
COIL
L802
G1C3N0ZA0063
COIL
L803
G1C3N0ZA0063
COIL
L804
G1C1N8Z00006
COIL
(RESISTOR ARRAYS)
RA1
D1H810240004
RESISTOR ARRAY
S
RA402 D1H410320002
RESISTOR ARRAY
RA80
D1H422120001
RESISTOR ARRAY
(VARISTOR)
SA1
J0LF00000026
VARISTOR
(SURGE
ABSORBER)
(RESISTORS)
R3
PQ4R10XJ184
180k S
R4
PQ4R10XJ105
1M S
R5
PQ4R10XJ184
180k S
R6
PQ4R10XJ105
1M S
R8
ERJ3GEYJ104
100k S
R10
ERJ3GEYJ104
100k S
R12
ERJ2GEJ103
10k S
R13
ERJ2GEJ681
680
S
R14
ERJ3GEYJ104
100k S
R15
PQ4R18XJ272
2.7k S
R16
ERJ2GEJ103
10k S
R17
ERJ2GEJ222
2.2k S
R18
ERJ2GEJ273X
27k S
R19
ERJ2GEJ822
8.2k S
R20
ERJ2GEJ272
2.7k S
R21
ERJ12YJ120
12
R22
ERJ12YJ270
27
R23
ERJ2GEJ104
100k S
R24
ERJ2GEJ473
47k S
R27
ERJ2GEJ104
100k S
R28
ERJ2GEJ474X
470k S
ǡ
Ǵ
ǡ
ǡ
ǴǴ
Addition
Addition