Panasonic KX-TG2521RUT / KX-TGA251RUT Service Manual ▷ View online
41
KX-TG2521RUT/KX-TGA251RUT
(K)* Frequency Offset Confir-
mation
-
Follow steps 1 to 3 of (I).
4.Confirm that the frequency Offset is < ± 50 kHz.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(L)* Frequency Drift Confir-
mation
-
Follow steps 1 to 3 of (I).
4.Confirm that the frequency Drift is < ± 35 kHz/ms.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(M)*
Sensitivity Receiver
Confirmation
-
Follow steps 1 to 3 of (I).
4.Set DECT tester power to -88 dBm.
5.Confirm that the BER is < 1000 ppm.
5.Confirm that the BER is < 1000 ppm.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(N)* Power RAMP Confirma-
tion
-
Follow steps 1 to 3 of (I).
4.Confirm that Power RAMP is matching.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(O) Audio Check and Confir-
mation
-
1. Link to BASE which is conected to Line Simulator.
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm(600Ω)/1kHz to MIC of Handset.
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm(600Ω)/1kHz to MIC of Handset.
Measure the Level at Line I/F and distortion level.
4. Confirm that the level is -2.5dBm ± 2dBm and that the distortion level is <5% at
TEL Line (600ΩLoad).
5. Input -20dBm(600Ω/1kHz to Line I/F.
Measure the Level at Receiver of Handset and distortion level (Receive volume
set to second position from minimum).
set to second position from minimum).
6. Confirm that the level is -23dBm ± 2 dBm and that the distortion level is <5% at
Receiver (150ΩLoad).
IC1, C12, C96,
C97, R215,
R27, RA4,
C11, C13,
R28, D3, D4,
MIC, R73, R74
(P) SP phone Audio Check
and Confirmation
-
1. Link to Base which is connected to Line Simulator.
2. Set line voltage to 48V and line current to 50mA.
3. Set the handset off-hook using SP-Phone key.
4. .Input -25 dBm(600Ω/1KHz to Line I/F and measure Receiving level at SP+
2. Set line voltage to 48V and line current to 50mA.
3. Set the handset off-hook using SP-Phone key.
4. .Input -25 dBm(600Ω/1KHz to Line I/F and measure Receiving level at SP+
and SP-.
5. Confirm that the level is -12 dBm ± 2 dBm and that the distortion level is < 5%.
(vol = 3)
IC1, C12, C73,
D13, D14,
R73, R74,
R73, R74,
MIC, C11,
C13, RA4,
R27, R28,
C96, C97,
C96, C97,
R215, C72
(Q) Charge Pump 3.0V Sup-
ply Confirmation
CP3.0V
1. Confirm that the voltage between testpoint CP3.0V and GND is 3.0V -0.1/
+0.3V.
C49, C52~C54
(R) Charge Pump 4.0V Sup-
ply Confirmation
CP4.0V
1. Confirm that the voltage between testpoint CP4.0V and GND is 4.0V -0.2V.
C50, C51,
C55
Items
Check
Point
Procedure
Check or
Replace Parts
42
KX-TG2521RUT/KX-TGA251RUT
10 Disassembly and Assembly Instructions
10.1. Disassembly Instructions
10.1.1. Base Unit
43
KX-TG2521RUT/KX-TGA251RUT
10.1.2. Handset
44
KX-TG2521RUT/KX-TGA251RUT
10.2. How to Replace the Handset LCD
Note:
The illustrations are simplified in this page.
They may differ from the actual product.
They may differ from the actual product.
Click on the first or last page to see other KX-TG2521RUT / KX-TGA251RUT service manuals if exist.