DOWNLOAD Panasonic KX-TG1711UAB / KX-TG1711UAJ / KX-TG1711UAW / KX-TGA171RUB / KX-TGA171RUJ / KX-TGA171RUW Service Manual ↓ Size: 2.05 MB | Pages: 60 in PDF or view online for FREE

Model
KX-TG1711UAB KX-TG1711UAJ KX-TG1711UAW KX-TGA171RUB KX-TGA171RUJ KX-TGA171RUW
Pages
60
Size
2.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Telephone / DIGITAL CORDLESS PHONE
File
kx-tg1711uab-kx-tg1711uaj-kx-tg1711uaw-kx-tga171ru.pdf
Date

Panasonic KX-TG1711UAB / KX-TG1711UAJ / KX-TG1711UAW / KX-TGA171RUB / KX-TGA171RUJ / KX-TGA171RUW Service Manual ▷ View online

16
KX-TG1711UAB/KX-TG1711UAJ/KX-TG1711UAW/KX-TGA171RUB/KX-TGA171RUJ/KX-TGA171RUW
8.1.2.
Handset
Note:
(*1) Refer to For Service Hint (P.13).
H/S key operation
H/S LCD
Important:
  Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
5).  Repeat from Step 3).
2).  Press "#003". 
      A is Address   D is data     
3).  Press "XXXX"(Address) ,
      then press 
{j/OK}
 (Menu/OK) key.
      D is current setting data    
4).  Press "YY"(Data) ,
      then press 
{j/OK}
 (Menu/OK) key.
      D is new setting data 
      
If press 
{ic}
 (Off/
Power
) twice anytime, return to standby mode.
Ringer Setup
w
1
A:0000   D:00
w
1
A:XXXX   D:XX
1
w
1
A:XXXX   D:YY
w
1
A:XXXX   D:YY
w
1).   Press 
{j/OK}
 (Menu/OK) key.
{C} (Clear)
Dial keypad
{j/OK} (Menu/OK)
Navigator key
{^} {V} {<} {>}
{ic} (Off/Power)
17
KX-TG1711UAB/KX-TG1711UAJ/KX-TG1711UAW/KX-TGA171RUB/KX-TGA171RUJ/KX-TGA171RUW
Frequency Used Items (Handset)
Note:
*: When you enter the address, please refer to the table in Note: (P.14) of Engineering Mode.
ex.)
(*1) This model has already been setting Max.
(*2) Each Volume level is different by 3dB, (l.e Volume 3 and Volume 2..) If one of Receiving level is changed it is highly
recommended changing other Receiving levels as well.
(*3) Use these items in a READ-ONLY mode to confirm the contents. Careless rewriting may cause serious damage to the
Handset.
(*4)
Items (*4)
Address
Default Data
New Data
Remarks
Sending level
01 31
07 (36 dB)
06 (30 dB)
05 (24 dB)
04 (18 dB)
03 (12 dB)
(*1)
Receiving level
01 3D
BB4A (-2.4 dB)
Volume 5
01 3B
AA33 (-5.4 dB)
Volume 4
01 39
9995 (-8.4 dB)
Volume 3... default setting
01 37
99C2 (-11.4 dB)
Volume 2
01 35
A8A5 (-14.4 dB)
Volume 1 (*2)
Items
Description
Sending level
Analog Front End MIC Setting for Handset Mode
Receiving level
Analog Front End LSR Setting for Handset Mode
Battery Low
ADC value for battery low detection
Frequency
Setting value of FREQ_TRIM_REG
ID
International Portable Part Equipment Identities
18
KX-TG1711UAB/KX-TG1711UAJ/KX-TG1711UAW/KX-TGA171RUB/KX-TGA171RUJ/KX-TGA171RUW
9 Troubleshooting Guide
9.1.
Troubleshooting Flowchart
Flow Chart
Cross Reference:
Check Power (P.19)
Bell Reception (P.23)
Check Battery Charge (P.20)
Check Link (P.21)
Check Handset Transmission (P.23)
Check Handset Reception (P.23)
Signal Route (P.12)
Check Caller ID (P.23)
Power ON Base Unit
Bell
Link
Battery Charge
Handset Voice Transmission
Handset Voice Reception
DTMF dial
OK
OK
Not Link
OK
OK
OK
OK
Not Work
No Bell
No Voice
Not Charge
No Voice
No Signal
Check Handset Transmission
Check Handset Reception
Signal Route
Check Battery Charge
Bell Reception
Check Power
Check Link
Caller ID Reception
OK
No Signal
Check Caller ID
19
KX-TG1711UAB/KX-TG1711UAJ/KX-TG1711UAW/KX-TGA171RUB/KX-TGA171RUJ/KX-TGA171RUW
9.1.1.
Check Power
9.1.1.1.
Base Unit
Is the AC Adaptor inserted into AC outlet? (Check AC Adaptor’s specification.)
Cross Reference
Power Supply Circuit (P.8)
9.1.1.2.
Handset
Cross Reference
Power Supply Circuit/Reset Circuit (P.11)
Is input of IC2 (pin3) about 5.5V?
Check F1 is not opened, C34, C35, C58, C60 is 
not shorted.
Check AC Adaptor.
Check Power Supply Circuit.
Is the output voltage of IC2 (pin2) about 2.65V?
Check X1, C23.
Check Career PCB 
Is C48(RESETQ) High?
Check Career PCB.
YES
YES
YES
YES
YES
YES
NO
NO
NO
Check Power Supply Circuit/Reset Circuit.
Is the voltage of VDDDCDC2 about 3.3 V?
Is the voltage of battery between battery    
and battery     2.3V more?
Check the battery and around Battery Holder are 
not shorted.
Is the battery inserted to Battery Holder?
Is C109 (VDDBAT) voltage about 2.3V more?
YES
YES
YES
NO
NO
NO
+
Page of 60
Display

Click on the first or last page to see other KX-TG1711UAB / KX-TG1711UAJ / KX-TG1711UAW / KX-TGA171RUB / KX-TGA171RUJ / KX-TGA171RUW service manuals if exist.