Panasonic KX-TG1711CAB / KX-TG1711CAJ / KX-TG1712CAB / KX-TGA171RUB / KX-TGA171RUJ / KX-TG1711UAB / KX-TG1711UAJ / KX-TG1711UAW / KX-TGA171RUW / KX-TG1711RUB / KX-TG1711RUJ / KX-TG1711RUW Service Manual / Supplement ▷ View online
2
TABLE OF CONTENTS
PAGE
PAGE
1 ORIGINAL SERVICE MANUAL INFORMATION ----------2
2 REPLACEMENT PARTS LIST ---------------------------------2
2 REPLACEMENT PARTS LIST ---------------------------------2
2.1. REFERENCE CHART ------------------------------------2
3 Operating Instructions------------------------------------------ 3
3.1. For Service Hint -------------------------------------------- 3
1 ORIGINAL SERVICE MANUAL INFORMATION
2 REPLACEMENT PARTS LIST
2.1.
REFERENCE CHART
Model No. on S/M
Destinations
Order No. of S/M
Suffix Code
Base Unit Handset
KX-TG1711LFB/KX-TGA171LFB
Dominican Republic,
Jamaica,
Republic of Trinidad and
Tobago, Barbados,
Saint Christphor and Nevis,
Bahamas, Cayman Islands,
Bahamas, Cayman Islands,
Suriname
KM41309747CE
---
---
KX-TG1711AGB/KX-TG1712AGB/KX-TGA171AGB
Argentina
KM41110507CE
---
---
KX-TG1711LBB/KX-TG1712LBB/KX-TGA171LBB
Brazil
KM41109499CE
---
---
KX-TG1711ARB/KX-TGA171EXB
Austria
KM41109498CE
---
---
KX-TG1711MEB/KX-TG1712MEB/KX-TGA171MEB
Mexico
KM41108492CE
---
---
KX-TG1711LCB/KX-TG1712LCB/KX-TGA171LCB
Chile, Uruguay and Paraguay
KM41108477CE
---
---
KX-TG1711LAB/KX-TGA171LAB
Latin America
KM41107457CE
---
---
KX-TG1711CAB/KX-TG1711CAJ/KX-TG1712CAB/KX-TGA171RUB/
KX-TGA171RUJ
KX-TGA171RUJ
Kazakhstan, Tajikistan,
Uzbekistan, Turkmenistan and
Kyrgyzstan
KM41105376CE
---
---
KX-TG1711UAB/KX-TG1711UAJ/KX-TG1711UAW/KX-TGA171RUB/
KX-TGA171RUJ/KX-TGA171RUW
KX-TGA171RUJ/KX-TGA171RUW
Ukraine, Armenia, Moldova
and Azerbaijan
KM41105378CE
---
---
KX-TG1711RUB/KX-TG1711RUJ/KX-TG1711RUW/KX-TGA171RUB/
KX-TGA171RUJ/KX-TGA171RUW
KX-TGA171RUJ/KX-TGA171RUW
Russia, Belarus
KM41105380CE
---
---
KX-TG1711GB/KX-TG1712GB/KX-TGA171EXB
Germany
KM41106408CE
---
---
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance
Remarks:
7: Correction
7: Correction
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the Interchangeability. See the "Notes" column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
**The following items (V-Z) indicate the Interchangeability. See the "Notes" column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
V
W
X
Y
Z
Original
New
New
Early (before change)
Late (after
Late (after
change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
Original parts may be used in early production sets only. New parts may be used in
early or late production sets. Use original parts where possible, then stock new parts.
early or late production sets. Use original parts where possible, then stock new parts.
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Original parts may be used in early production sets only. New parts may be used in
late production sets only. Stock both original and new parts.
late production sets only. Stock both original and new parts.
Original
New
New
Early (before change)
Late (after
Late (after
change)
Original
New
New
Other
Early (before change)
Late (after
Late (after
change)
Original
New
New
Early (before change)
Late (after
Late (after
change)
3
3 Operating Instructions
3.1.
For Service Hint
MO
Items
Contents
PIN Code
Reset user changed PIN to factory default value.
1) Enter Base engineering mode.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
Reset to factory default settings.
1) Copy PNZZTG1611x to your PC including Batch and Reference files
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
2) Install Perl application to your PC
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
3) Connect Base unit/Handset and PC.
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
4) Execute “cte open com X” (“X” is Com port number that is connected to Serial JIG)
on DOS Window.
on DOS Window.
5) Execute "UserDef.bat" in each "Base"/"Handset" folder in CD-ROM.
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
6) Disconnect Base unit/Handset from PC.
7) Power off/on of base unit and handset.
Factory
reset
reset
3
3 Operating Instructions
3.1.
For Service Hint
MO
Items
Contents
PIN Code
Reset user changed PIN to factory default value.
1) Enter Base engineering mode.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
Reset to factory default settings.
1) Copy PNZZTG1611x to your PC including Batch and Reference files
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
2) Install Perl application to your PC
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
3) Connect Base unit/Handset and PC.
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
4) Execute “cte open com X” (“X” is Com port number that is connected to Serial JIG)
on DOS Window.
on DOS Window.
5) Execute "UserDef.bat" in each "Base"/"Handset" folder in CD-ROM.
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
6) Disconnect Base unit/Handset from PC.
7) Power off/on of base unit and handset.
Factory
reset
reset
3
3 Operating Instructions
3.1.
For Service Hint
MO
Items
Contents
PIN Code
Reset user changed PIN to factory default value.
1) Enter Base engineering mode.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
See 8 Service Mode/8.1. Engineering Mode/8.1.1. Base Unit
2) Change value to "30303030" of address “02AB” to “02AE” and “02CD” to “02D0”.
3) Power off/on of base unit and handset.
Reset to factory default settings.
1) Copy PNZZTG1611x to your PC including Batch and Reference files
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
You need to copy all batch files for Base unit to your PC. The folder should have
the same folder structure as CDROM like C:¥PNZZTG1611x¥01_Handset¥.....
2) Install Perl application to your PC
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
To check all value in EEPROM, you need to install “Active Perl” in your PC.
To install “Active Perl”, download “ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi”
from the ActivePerl Web page (http://www.activestate.com) to your PC and execute it.
Regarding the details of Active Perl, please see the above Active Perl Web page.
ActivePerl-5.14.2.1402-MSWin32-x86-295342.msi : Active Perl installer.
3) Connect Base unit/Handset and PC.
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
See 11.1. The Setting Method of JIG (Base Unit).
Or see 11.4. The Setting Method of JIG (Handset).
4) Execute “cte open com X” (“X” is Com port number that is connected to Serial JIG)
on DOS Window.
on DOS Window.
5) Execute "UserDef.bat" in each "Base"/"Handset" folder in CD-ROM.
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
For RU,UA, CA, LA, LB, LC, LF, AG, ME, TW models, use "UserDef3.bat".
<Base unit>
Usage:”UserDef.bat –FP"
Usage:”UserDef3.bat –FP xx” xx=LA/ LB/LC/LF/AG/ME/TW
<Handset>
Usage:”UserDef.bat –PP"
Usage:”UserDef3.bat –PP xx” xx=LA/ LB/LC/LF/AG/ME/TW
6) Disconnect Base unit/Handset from PC.
7) Power off/on of base unit and handset.
Factory
reset
reset
Display