Panasonic KX-TG1105RUS / KX-TG1105RUT / KX-TG1106RUS / KX-TG1106RUT / KX-TGA110RUS / KX-TGA110RUT Service Manual ▷ View online
25.3. FLAT PACKAGE IC INSTALLATION PROCEDURE
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy of the IC setting with the corresponding soldering
foil.
foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction of the arrow.
25.4. BRIDGE MODIFICATION PROCEDURE
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
65
KX-TG1105RUS / KX-TG1105R UT / KX-TG1106R US / KX-TG1106R UT / KX-TGA110RUS / KX-TGA110RUT
26 CABINET AND ELECTRICAL PARTS (BASE UNIT)
66
KX-TG1105RUS / KX-TG1105R UT / KX-TG1106R US / KX-TG1106R UT / KX-TGA110RUS / KX-TGA110RUT
27 CABINET AND ELECTRICAL PARTS (HANDSET)
Note:
(*1) The rechargeable Ni-MH battery P03P (HHR-4EPT or HHR-55AAAB) is available through sales route of Panasonic.
(*2) This cable is fixed by welding. Refer to How to Replace the Handset LCD (P.16).
(*3) Attach the spacer (No. 117) to the exact location described above.
67
KX-TG1105RUS / KX-TG1105R UT / KX-TG1106R US / KX-TG1106R UT / KX-TGA110RUS / KX-TGA110RUT
28 CABINET AND ELECTRICAL PARTS (CHARGER UNIT)
68
KX-TG1105RUS / KX-TG1105R UT / KX-TG1106R US / KX-TG1106R UT / KX-TGA110RUS / KX-TGA110RUT
Click on the first or last page to see other KX-TG1105RUS / KX-TG1105RUT / KX-TG1106RUS / KX-TG1106RUT / KX-TGA110RUS / KX-TGA110RUT service manuals if exist.