Panasonic KX-TCD825RUS / KX-TCD825RUT / KX-TCA181RUS / KX-TCA181RUT Service Manual ▷ View online
Address
Initial
Type
Name
Description
Default
value
Country
Setting
03D4
1
EEP_CasMinDuration
CAS minimum duration
Unit: 10ms, Default: 60ms
Unit: 10ms, Default: 60ms
0x06
x
03D5
1
EEP_CasMaxDuration
CAS maximum duration
Unit: 10ms, Default: 130ms
Unit: 10ms, Default: 130ms
0x0D
x
03D6
1
EEP_DtmfMinDuration
DTMF minimum duration
Unit: 10ms, Default: 20ms
Unit: 10ms, Default: 20ms
0x02
x
03D7
1
EEP_DtmfMaxDuration
DTMF maximum duration
Unit: 10ms, Default: disable(0xFF)
Unit: 10ms, Default: disable(0xFF)
0xFF
x
03D8
1
EEP_RuDtmfDurationMin
RU_DTMF minimum duration
Unit: 10ms, Default: 10ms
Unit: 10ms, Default: 10ms
0x01
x
03D9
1
EEP_RuDtmfDurationMax
RU_DTMF maximaum duration
Unit: 10ms, Default: 70ms
Unit: 10ms, Default: 70ms
0x07
x
03DA
1
EEP_RuDtmfDurationOff
RU_DTMF Off duration
Unit: 10ms, Default: 50ms
Unit: 10ms, Default: 50ms
0x05
x
0D4B
3
EEP_RuClipReqLength
Length of REQ signal
Unit: 10ms, Default: 140ms
Unit: 10ms, Default: 140ms
0x0E
x
0D4C
3
EEP_RuClipDelayBetweenReq
Delay between REQ signal
Unit: 10ms, Default: 200ms
Unit: 10ms, Default: 200ms
0x14
x
0D4D
3
EEP_RuClipRepeatReq
Number of repeat REQ request Sent
Default: 3 repeat
Default: 3 repeat
0x03
x
0D4E
3
EEP_RuClipDelayBeforeReq
Delay before Send REQ signal
Unit: 10ms, Default: 200ms
Unit: 10ms, Default: 200ms
0x14
x
0D4F
3
EEP_RuClipOnOff
Russian CLIP On/Off
0x01
x
0D50
3
EEP_RuClipRingNumBeforeSequence
Number Of Rings Patterns Before Start
Sequence
Default: 1
Sequence
Default: 1
0x01
x
0D7B
3
EEP_RuClipDisplayDigit
Number Of digits to be displayed
Default:7 digits
Default:7 digits
0x07
x
69
KX-TCD825RUS / KX-TCD825R UT / KX-TCA181RUS / KX-TCA181RUT
24 FLASH LAYOUT (HANDSET)
24.1. Scope
The purpose ofthis section is to describe the layout ofthe FLASH (IC11) for the KX-TCA181 Handset.
The FLASH contains hardware, software, and user specific parameters. Some parameters are set during production of the
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
24.2. Introduction
The handset uses a 32k bit serial FLASH (IC11) for storing volatile parameters. All parameters are set up before the handset
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
This document lists all default parameters with a short description.
Initial Type
Description
F
The data initialized by only F command
0
The data initialized by F and 0 command
1
The data initialized by F, 0 and 1 command
2
The data initialized by F, 0, 1 and 2 command
3
The data initialized by all command (F, 0, 1, 2, 3)
Country Setting
Description
x
Default - no specific country setting, so revert to default value.
24.3. FLASH contents
24.3.1. General Setup
Address
Initial
Type
Name
Description
Default value
Country
Setting
0001
F
EEP_FreqTrim_L
Setting value of FREQ_TRIM_REG
0x75
x
0002
F
EEP_BandGap
Setting value of BandGap REG
0x08
x
0010
-
EEP_Ipei
International Portable Part Equipment Identities.
A concatenation ofan EMC and a unique 20 bit Serial
Number.
A concatenation ofan EMC and a unique 20 bit Serial
Number.
0x00, 0x00,
0x00, 0x00,
0x00, 0x00,
0x00
x
01C2
1
EEP_LowQualityLevel
Signal quality level at which handover is initiated (CRC
error count).
error count).
0x02
x
01C9
1
EEP_RxMuteSyncError
Continuous SYNC error times for the Rx Mute (0-0xFF:
Error times)
Error times)
0x01
x
001D
0
EEP_HandsetNumber
HandsetNumber ofSubscription0.
0xFF, 0xFF
x
001F
0
EEP_HandsetNumber1
HandsetNumber ofSubscription1.
0xFF, 0xFF
x
0021
0
EEP_HandsetNumber2
HandsetNumber ofSubscription2.
0xFF, 0xFF
x
0023
0
EEP_HandsetNumber3
HandsetNumber ofSubscription3.
0xFF, 0xFF
x
0025
0
EEP_Subscription0
GAP Subscription Data. Storage for 4 subscriptions each
with 53bytes.
<Subscription>
020 : SUB_boAssignedIPUI
021 : SUB_abIPUI[14]
02F : SUB_abPARK[5]
034 : SUB_abSARI[4]
038 : SUB_bPLI
039 : SUB_bLAL
03A : SUB_abARIplusRPN[5]
03F : SUB_boZAP
040 : SUB_bZAP
041 : SUB_boServiceClass
042 : SUB_bServiceClass
043 : AK_boUAKavailable
044 : AK_boUAKproven
045 : AK_abUAK_or_AC [16]
with 53bytes.
<Subscription>
020 : SUB_boAssignedIPUI
021 : SUB_abIPUI[14]
02F : SUB_abPARK[5]
034 : SUB_abSARI[4]
038 : SUB_bPLI
039 : SUB_bLAL
03A : SUB_abARIplusRPN[5]
03F : SUB_boZAP
040 : SUB_bZAP
041 : SUB_boServiceClass
042 : SUB_bServiceClass
043 : AK_boUAKavailable
044 : AK_boUAKproven
045 : AK_abUAK_or_AC [16]
All 0x00
x
03EF
3
EEP_HSPinCode
Handset Pin : 4 BCD Digits
0x00, 0x00
x
70
KX-TCD825RUS / KX-TCD825R UT / KX-TCA181RUS / KX-TCA181RUT
24.3.2. MMI Setting
Address
Initial
Type
Name
Description
Default value
Country
Setting
01DC
1
EEP_FactoryLanguageSetting
Selected Language for LCD
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17
CROATIAN:18
CATALAN:19
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17
CROATIAN:18
CATALAN:19
0x01
0x0E
01DD
1
EEP_Available_Language
Select Available Language
0:Disable, 1:Enable
Bit0:German
Bit1:English
Bit2:Spanish
Bit3:Norwegian
Bit4:French
Bit5:Italian
Bit6:Danish
Bit7:Dutch
0:Disable, 1:Enable
Bit0:German
Bit1:English
Bit2:Spanish
Bit3:Norwegian
Bit4:French
Bit5:Italian
Bit6:Danish
Bit7:Dutch
0xFF
0x17
01DE
Select Available Language
0:Disable, 1:Enable
Bit0:Swedish
Bit1:Finnish
Bit2:Greek
Bit3:Turkish
Bit4:Hungarian
Bit5:Portuguese
Bit6:Russian
Bit7:Polish
0:Disable, 1:Enable
Bit0:Swedish
Bit1:Finnish
Bit2:Greek
Bit3:Turkish
Bit4:Hungarian
Bit5:Portuguese
Bit6:Russian
Bit7:Polish
0x2F
0x40
01DF
Select Available Language
0:Disable, 1:Enable
Bit0:Slovakian
Bit1:Czechs
Bit2:Croatian
Bit3:Catalan
Bit4:Ukrinian
Bit5:Spanish for Mexico
Bit6:Slovenian
Bit7:Estonian
0:Disable, 1:Enable
Bit0:Slovakian
Bit1:Czechs
Bit2:Croatian
Bit3:Catalan
Bit4:Ukrinian
Bit5:Spanish for Mexico
Bit6:Slovenian
Bit7:Estonian
0x08
0x10
01E0
Select Available Language
0:Disable, 1:Enable
Bit0:Lithuanian
Bit1:Latvian
Bit2:Romanian
Bit3:Bulgarian
Bit4:Seribian
Bit5:Macedonian
Bit6:Albanian
Bit7:Reserve
0:Disable, 1:Enable
Bit0:Lithuanian
Bit1:Latvian
Bit2:Romanian
Bit3:Bulgarian
Bit4:Seribian
Bit5:Macedonian
Bit6:Albanian
Bit7:Reserve
0x00
x
0414
3
EEP_Language
User_Setting Language
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5
DENISH:6
DUTCH:7
SWEDISH:8
FINNISH:9
GREEK:10
GREEK:10
TURKISH:11
HUNGARIAN:12
PORTUGUESE:13
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
0x01
0x0E
0415
3
EEP_SmsEatoniLanguage
Eatoni Setting Language
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5
GERAM:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5
DENISH:6
DUTCH:7
SWEDISH:8
FINNISH:9
GREEK:10
GREEK:10
TURKISH:11
HUNGARIAN:12
PORTUGUESE:13
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
0x01
0x0E
71
KX-TCD825RUS / KX-TCD825R UT / KX-TCA181RUS / KX-TCA181RUT
Address
Initial
Type
Name
Description
Default value
Country
Setting
0362
1
EEP_CountryFunction
Country parameter
0bit: Reset Ear-SP Vol. after Talk...0: Hold, 1: Reset
1bit: PBX Phone-Book...0: Enable, 1: Disable
2bit: Ringer Option Menu (Base Setting)...0: Off, 1:
On
3bit: SMS Print...0: Off, 1: On
4-7bit: Reserve
0bit: Reset Ear-SP Vol. after Talk...0: Hold, 1: Reset
1bit: PBX Phone-Book...0: Enable, 1: Disable
2bit: Ringer Option Menu (Base Setting)...0: Off, 1:
On
3bit: SMS Print...0: Off, 1: On
4-7bit: Reserve
0x02
x
24.3.3. MMI1 Setting
Address
Initial
Type
Name
Description
Default value
Country
Setting
0102
1
EEP_DspSdtLevel
DSP Parameter SideTone2
Main:SideTone2 Main route level
MictoRcv:SideTone2 MIc to Receiver level
Main:SideTone2 Main route level
MictoRcv:SideTone2 MIc to Receiver level
0x00, 0x0E
x
0104
1
EEP_DspToneLevel
DSP Parameter ToneLevel
Talk:Tone Level in Talk mode
Spp:Tone Level in Spp mode
Talk:Tone Level in Talk mode
Spp:Tone Level in Spp mode
0x00, 0x20,
0x00, 0x30
x
000E
F
EEP_LcdContrast
LCD contrast
0x20
x
01A4
1
EEP_CountryFunction01
Country parameter
Bit0:Call waiting Tone on/off...1:on, 0:off
Bit1:Clock Back Up...1:on, 0:off
Bit2:Charge ON Tone...1:Tone on, 0:KeyTone operating
Bit3:BackUpTime revise...1:on, 0:off
Bit4:On Charge Partial...1:none, 0:Partial Display
Bit5:Start Talk Count Delay on/off...1:on, 0:off
Bit6:Russian Model 1: Russian Model 0: Not Russian Model
Bit7:Reserve
Bit0:Call waiting Tone on/off...1:on, 0:off
Bit1:Clock Back Up...1:on, 0:off
Bit2:Charge ON Tone...1:Tone on, 0:KeyTone operating
Bit3:BackUpTime revise...1:on, 0:off
Bit4:On Charge Partial...1:none, 0:Partial Display
Bit5:Start Talk Count Delay on/off...1:on, 0:off
Bit6:Russian Model 1: Russian Model 0: Not Russian Model
Bit7:Reserve
0x3E
0x7E
01A7
3
EEP_EEToneConfig
Tone Option Data
Bit0:Keytone on/off00 - 0000 = Off / 0001 = Tone On
Bit1:Keytone on/off01 - Reserve
Bit2:Keytone on/off02 - Reserve
Bit3:Keytone on/off03 - Reserve
Bit4:Call waiting on/off - 1/0
Bit5:Range alarm on/off - 1/0
Bit6:Battery low alarm on/off - 1/0
Bit0:Keytone on/off00 - 0000 = Off / 0001 = Tone On
Bit1:Keytone on/off01 - Reserve
Bit2:Keytone on/off02 - Reserve
Bit3:Keytone on/off03 - Reserve
Bit4:Call waiting on/off - 1/0
Bit5:Range alarm on/off - 1/0
Bit6:Battery low alarm on/off - 1/0
0x51
x
24.3.4. Battery Paramters
Address
Initial
Type
Name
Description
Default value
Country
Setting
0004
F
EEP_LowVoltage
ADC value for battery low detection
0x25
x
0005
F
EEP_NoVoltage
ADC value for shutdown voltage
0x08
x
72
KX-TCD825RUS / KX-TCD825R UT / KX-TCA181RUS / KX-TCA181RUT
Click on the first or last page to see other KX-TCD825RUS / KX-TCD825RUT / KX-TCA181RUS / KX-TCA181RUT service manuals if exist.