Panasonic KX-TCD806UAT / KX-TCA180UAT Service Manual ▷ View online
25.3. FLAT PACKAGE IC INSTALLATION PROCEDURE
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy of the IC setting with the corresponding soldering
foil.
foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction of the arrow.
25.4. BRIDGE MODIFICATION PROCEDURE
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
73
KX-TCD806UAT / KX-TCA180UAT
26 CABINET AND ELECTRICAL PARTS LOCATION (BASE
UNIT)
74
KX-TCD806UAT / KX-TCA180UAT
27 CABINET AND ELECTRICAL PARTS LOCATION
(HANDSET)
Note:
(*1) The rechargeable Ni-MH battery P03P (HHR-4EPT) is available through sales route of Panasonic.
(*2) Attach the spacer (No. 129) to the exact location described above.
(*3) This cable is fixed by connector lock. Refer to Fix the LCD to the Main P.C.Board (Handset) (P.16).
75
KX-TCD806UAT / KX-TCA180UAT
28 CABINET AND ELECTRICAL PARTS LOCATION
(CHARGER UNIT)
76
KX-TCD806UAT / KX-TCA180UAT
Click on the first or last page to see other KX-TCD806UAT / KX-TCA180UAT service manuals if exist.