Panasonic KX-TCD465UA / KX-TCD467UA / KX-A146UA Service Manual ▷ View online
9.3. Charger Unit
Shown in Fig.-
To Remove
Remove
6
Lower Cabinet
Screws (2.6 × 14)..........(E) × 2
7
Main P.C. Board
Tape and Solder
Main P.C. Board
Main P.C. Board
33
KX-TCD465UA / KX-TCD467U A / KX-A146UA
10 ASSEMBLY INSTRUCTIONS
10.1. Warning When Constructing the Base Unit
OK
NG
Rib
CHG terminal is properly fit in the cabinet.
CHG terminal comes out of rib by pulling black lead wire when opening the cabinet and turning
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
34
KX-TCD465UA / KX-TCD467U A / KX-A146UA
10.2. Processing of Ringer/Charge Terminal Lead
35
KX-TCD465UA / KX-TCD467U A / KX-A146UA
Flow Chart
Cross Reference:
Check Power (P.37)
Bell Reception (P.43)
Check Battery Charge (P.38)
Check Link (P.39)
Check Handset Transmission (P.41)
Check Handset Reception (P.41)
SIGNAL ROUTE (P.66)
TAM Voice Prompt Problems (P.42)
11 TROUBLESHOOTING GUIDE
36
KX-TCD465UA / KX-TCD467U A / KX-A146UA
Click on the first or last page to see other KX-TCD465UA / KX-TCD467UA / KX-A146UA service manuals if exist.