Panasonic KX-TCD225UA / KX-TCA122UA / KX-TCA121UA Service Manual ▷ View online
4 BATTERY
4.1. Battery Installation
1. Insert the batteries negative ( ) terminal first.
2. Close the handset cover.
Note:
·
Use only rechargeable Ni-MH batteries P03P (HHR-4EPT).
4.2. Battery Charge
Place the handset on the base unit for about 7 hours before initial use.
When charging, the battery icon is shown as follows. When the batteries are fully charged,
remains on the display.
Note:
·
It is normal for the handset to feel warm during charging.
·
It takes 7 hours to fully charge the batteries, however, you can use the handset before the batteries are fully charged.
·
Clean the charge contacts of the handset and base unit with a soft, dry cloth, otherwise the batteries may not charge
properly. Clean if the unit is exposed to grease, dust or high humidity.
properly. Clean if the unit is exposed to grease, dust or high humidity.
·
When
flashes, recharge the handset batteries.
will continue to flash until the batteries have been charged for at
least 15 minutes.
·
If the handset is turned off, it will be turned on automatically when it is placed on the base unit.
6
KX-TCD225UA / KX-TCA122UA / KX-TCA121UA
4.3. Battery Life
After your Panasonic batteries are fully charged, you can expect the following performance:
Ni-MH batteries (700 mAh)
Operation
Operating Time
While in use (talking)
20 hours max.
While not in use (standby)
170 hours max.
Note:
·
Actual battery performance depends on a combination of how often the handset is in use (talking) and how often it is not
in use (standby).
in use (standby).
·
Battery operating time may be shortened over time depending on usage conditions and ambient temperature.
4.4. Battery Replacement
If
flashes even after the handset batteries have been charged for 7 hours, the batteries must be replaced.
Important:
·
We recommend the use of Panasonic rechargeable Ni-MH batteries P03P (HHR-4EPT). If you install non-rechargeable
batteries and start charging, the batteries may leak electrolyte.
batteries and start charging, the batteries may leak electrolyte.
·
Do not mix old and new batteries.
1. Press the notch on the handset cover firmly and slide it in the direction of the arrow.
2. Remove the old batteries positive (
) terminal first and install the new ones.
Note for Service:
·
You could use other rechargeable batteries on sale, but the unit is not guaranteed to work properly.
7
KX-TCD225UA / KX-TCA122UA / KX-TCA121UA
5 LOCATION OF CONTROLS
5.1. Base Unit
5.2. Handset
Note:
·
Up to 3 menu items can be displayed at a time. To select a menu item not shown on the current page, scroll up or down
by pressing the navigator key,
by pressing the navigator key,
or
, respectively.
8
KX-TCD225UA / KX-TCA122UA / KX-TCA121UA
6 SETTINGS
Important Information
General
·
Use only the AC adaptor included with this product.
·
Do not connect the AC adaptor to any AC outlet other than a standard 220 - 240 V AC outlet.
·
This product is unable to make calls when:
−
−
−
−
The portable handset battery(ies) need recharging or have failed.
−
−
−
−
There is a power failure.
−
−
−
−
The key lock feature is turned on.
−
−
−
−
The call bar feature is turned on (only phone numbers stored in the unit as emergency numbers can be called).
·
Do not open the base unit or handset other than to replace the battery(ies).
·
This product should not be used near emergency/intensive care medical equipment and should not be used by people with
pacemakers.
pacemakers.
·
Care should be taken that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this product to
excessive smoke, dust, mechanical vibration or shock.
excessive smoke, dust, mechanical vibration or shock.
Environment
·
Do not use this product near water.
·
This product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in
rooms where the temperature is less than 5 °C or greater than 40 °C.
rooms where the temperature is less than 5 °C or greater than 40 °C.
·
The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily
accessible.
accessible.
Warning:
·
To prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture.
Location
·
For maximum distance and noise-free operation, place your base unit:
−
−
−
−
Away from electrical appliances such as TVs, radios, personal computers or other phones.
−
−
−
−
In a convenient, high, and central location.
9
KX-TCD225UA / KX-TCA122UA / KX-TCA121UA
Click on the first or last page to see other KX-TCD225UA / KX-TCA122UA / KX-TCA121UA service manuals if exist.