Panasonic KX-TCD205RU / KX-TCD207RU / KX-TCA120RU Service Manual ▷ View online
30.3. FLAT PACKAGE IC INSTALLATION PROCEDURE
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy of the IC setting with the corresponding soldering
foil.
foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction of the arrow.
30.4. BRIDGE MODIFICATION PROCEDURE
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
81
KX-TCD205RU / KX-TCD207R U / KX-TCA120RU
31 CABINET AND ELECTRICAL PARTS (BASE UNIT)
82
KX-TCD205RU / KX-TCD207R U / KX-TCA120RU
32 CABINET AND ELECTRICAL PARTS (HANDSET)
Note:
(*1) The rechargeable Ni-MH battery P03P (HHR-4EPT) is available through sales route of Panasonic.
(*2) Attach the spacer (No. 118) to the exact location described above.
(*3) This cable is fixed by welding. Refer to HOW TO REPLACE THE HANDSET LCD (P.32).
83
KX-TCD205RU / KX-TCD207R U / KX-TCA120RU
33 CABINET AND ELECTRICAL PARTS (CHARGER UNIT)
84
KX-TCD205RU / KX-TCD207R U / KX-TCA120RU
Click on the first or last page to see other KX-TCD205RU / KX-TCD207RU / KX-TCA120RU service manuals if exist.