DOWNLOAD Panasonic KX-TC1045RUB Service Manual ↓ Size: 3.1 MB | Pages: 64 in PDF or view online for FREE

Model
KX-TC1045RUB
Pages
64
Size
3.1 MB
Type
PDF
Document
Service Manual
Brand
Device
Telephone / TAM
File
kx-tc1045rub.pdf
Date

Panasonic KX-TC1045RUB Service Manual ▷ View online

5  DISASSEMBLY INSTRUCTIONS
10
KX-TC1045RUB
11
KX-TC1045RUB
6  ADJUSTMENTS (BASE UNIT)
If your unit have below symptoms, adjust each item using remedy column from the table.
Symptom
Remedy
The base unit dose not respond to a call from handset.
Make adjustments in item (A)
The base unit dose not transmit or the transmit frequency is off. Make adjustments in item (B)
The transmit frequency is off.
Make comfirmation in item (C)
The transmit power output is low, and the operating distance
between base unit and handset is less than normal.
Make adjustments in item (D)
The reception sensitivity of base unit is low with noise.
Make adjustments in item (E)
The transmit level is large or small.
Make adjustments in item (F)
The reception level is large or small.
Make adjustments in item (G)
The unit does not link.
Make comfirmation in item (H)
How to set the test mode.
CH10 Test Mode
12
KX-TC1045RUB
7  ADJUSTMENTS (HANDSET)
If your unit have below symptoms, adjust each item using remedy column from the table.
Symptom
Remedy
The movement of Battery Low Indicator is wrong.
Make confirmation in item (A)
The base unit does not respond to a call from handset.
Make adjustment in item (B)
The base unit does not transmit or the transmit frequency is off. Make adjustment in item (C)
The transmit frequency is off.
Make confirmation in item (D)
The transmit power output is low, and the operating
distancebetween base unit and handset is less than normal.
Make confirmation in item (E)
The reception sensitivity of base unit is low with noise.
Make adjustment in item (F)
Does not link between base unit and handset.
Make confirmation in item(G)
The reception level is high or low.
Make adjustment in item (H)
The transmit level is high or low.
Make adjustment in item (I)
Unit condltion:
 1. Remove the antenna lead wire from P.C Board of handset.
 2. Power Supply: DC 3.9V
 3. Speaker Load: 150
CH
TX Frequency
RX Frequency
CH10 40.000MHz
30.300MHz
How to set the test mode.
CH10 Test Mode
13
KX-TC1045RUB
Page of 64
Display

Click on the first or last page to see other KX-TC1045RUB service manuals if exist.