Panasonic KX-NT511PRUW / KX-NT511PRUB Service Manual ▷ View online
25
KX-NT511PRUB/KX-NT511PRUW
9.4.
Speaker-Phone Does Not Work
9.4.1.
Receive
9.4.2.
Send
No
Yes
END
Confirm the Speakerphone communication.
Can it hear any sound from speakerphone speaker?
Related parts:
No
Yes
Confirm the waveform between TP CL-SPP and
TP CL-SPM. Is there any output waveform?
TP CL-SPM. Is there any output waveform?
Check the soldering.
Resolder or replace parts as needed.
Resolder or replace parts as needed.
L301, L302, R329, R330, C375,
C376
Related parts:
Speaker, Speaker-cable
No
Yes
No
Yes
END
Related parts: Microphone, Microphone-cable
Confirm the Speakerphone communication.
Can it hear any sound from speakerphone
microphone?
Confirm the Speakerphone communication.
Can it hear any sound from speakerphone
microphone?
Related parts: R320, R321, R322, R323, R325,
R326, R327, R328, C365, C366
Check the soldering.
Resolder or replace parts as needed.
Resolder or replace parts as needed.
No
Yes
Measure the voltage at C369.
(Between MICBIAS and AGND).
Is it 3.3V?
Related parts: R324
26
KX-NT511PRUB/KX-NT511PRUW
9.5.
Ethernet Does Not work
9.5.1.
PHY Data Error
Note:
Refer to waveform (2), (8),
(9) and (10) in Waveform (P.44), (P.45).
Connect LAN cables to SwitchingHUB.
Check the soldering.
Resolder or replace parts as needed.
Measure the voltage at Pin5 and Pin22 of IC201.
Is it 3.3V?
Measure the voltage at Pin7 and Pin32 of IC201.
Is it 1.8V?
Measure the 25MOUT signal at Pin14 of IC201.
Is it 25MHz?
See the communication waveform(2).
Confirm the waveform between Pin36 and Pin37 of IC201.
See the communication waveform (7).
Yes
Yes
Related parts: L201, L308
Related parts: L202
Related parts: X1, C101, C102, R108, R110,
R111, L105, IC101
R111, L105, IC101
Related parts: IC101, IC201, R101, R102, R217,
R218, RA202
R218, RA202
Confirm the waveform Pin23 and Pin30 of IC201.
Confirm the waveform Pin26 and Pin29 of IC201.
See the communication waveform (8).
Yes
Related parts: R214, R220, L204, L205, IC201
See the communication waveform (9).
Yes
Related parts: IC201, RA201
Confirm the waveform from Pin17 to 20 of IC201
See the communication waveform (10).
when sending a packet.
Yes
Related parts: IC201, RA101
Yes
END
No
No
No
No
No
No
No
Recheck the TEST POINT(ST0-ST3).
See Table-1. (P.19)
Is it L2SW initialization Error (No.11)?
Check the TEST POINT(ST0-ST3).
See Table-1. (P.19)
L2SW initialization Error (No.11) ?
Yes
Related parts: IC201
No
Yes
PHY(IC401) is working.
See 9.5.2 LAN port (P.2
See 9.5.2 LAN port (P.2
) or
9.5.3 PC port. (P.2
)
No
Yes
27
KX-NT511PRUB/KX-NT511PRUW
9.5.2.
LAN port
Note:
Refer to waveform (11) and (12) in Waveform (P.45).
Connect LAN cables to SwitchingHUB.
Connect LAN cables to SwitchingHUB.
9.5.3.
PC port
Note:
Refer to waveform (13) and (14) in Waveform (P.45).
Connect LAN cables to SwitchingHUB.
Check the soldering.
Resolder or replace parts as needed.
Confirm the waveform between LAN1 ans LAN2 land.
Confirm the waveform between LAN3 ans LAN4 land.
Confirm the waveform between LAN3 ans LAN4 land.
See the communication waveform (11)or(12).
Related parts: T2,L203,R203,R204,R209,R210,
R211,R212,C209,C210,C255,
C256,C202,Flat cable,JK2,R403,
R404
R211,R212,C209,C210,C255,
C256,C202,Flat cable,JK2,R403,
R404
END
No
Yes
Check the soldering.
Resolder or replace parts as needed.
Confirm the waveform between PC1 ans PC2 land.
Confirm the waveform between PC3 ans PC4 land.
Confirm the waveform between PC3 ans PC4 land.
See the communication waveform (13)or(14).
Related parts: T1,L203,R201,R202,R205,R206,
R207,R208,C207,C209,C201,
Flat cable,JK2,R401,R402
R207,R208,C207,C209,C201,
Flat cable,JK2,R401,R402
END
No
Yes
28
KX-NT511PRUB/KX-NT511PRUW
9.6.
LED Does Not Light
Check the soldering.
Resolder or replace parts as needed.
Does SP-PHONE_LED light?
Related parts: IC101,L401,LED406,Q105,
R171,R155
R171,R155
No
Yes
Related parts: IC101,LED407,Q105,R172,R156
No
Yes
Does RINGER LED(RED) light?
No
Yes
Does MUTE LED (RED) light?
Does FF1 LED (Function) light?
Related parts: IC101,L401,LED405,Q104,R170,
R154
R154
No
Yes
Related parts: IC101,L401,LED401,Q101,R163,
R164,R147,R148
R164,R147,R148
END
Click on the first or last page to see other KX-NT511PRUW / KX-NT511PRUB service manuals if exist.