DOWNLOAD Panasonic WV-F565 Service Manual ↓ Size: 47.08 KB | Pages: 4 in PDF or view online for FREE

Model
WV-F565
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
47.08 KB
Type
PDF
Document
Service Manual / Supplement
Brand
Device
Provideo / CAMERA
File
wv-f565.pdf
Date

Panasonic WV-F565 Service Manual / Supplement ▷ View online

WV-F565
ORDER NO. BSD0001072S8
C
2 0 0 0   M a t s u s h i t a   C o m m u n i c a t i o n   I n d u s t r i a l   C o . ,   L t d .
A l l   r i g h t s   r e s e r v e d .   U n a u t h o r i z e d   c o p y i n g   a n d
d i s t r i b u t i o n   i s   a   v i o l a t i o n   o f   l a w .
Colour  Video  Camera
Drive Board (YWVBF565E1A)
1. The picture does not clear. Delete the Resistors R72 and R137, change the Resistor R134, and add the Resistors ,Capacitors
and Coil R71, R138, C67, C83 and L14 from the serial number 55AXXXX1.
2. The line scratch noise when operate the shutter. Delete the Resistor R56 rom the serial number 52AXXXX1.
3. Improve of the resolution. Change the Resistors R128 and R130, and add the Capacitors C80 and C81 from the serial number
52AXXXX1.
Preamp Board (YWVKCF565E1A)
Improve of the Streaking. Change the Resistors R118, R218 and R318 from the serial number 53AXXXX1.
Sync/Encoder Board (YWVKCF565E2A)
1. Out of the Phase of the subcarrier in the G/L when the Power ON/OFF. Change the Resistor and Capacitor R51 and C42 from
the serial number 53AXXXX1.
C107, and delete the Capacitors C312 and C313, and add the Capacitor C315 and IC35 from the serial number 52AXXXX1.
Preprocess Board (YWVKBF565E2A)
1. Out of the Black Balance when the Night Eye mode. Change the Resistors R158, R358 and R558 from the serial number
6YAXXXX1.
2. Rch input gain adjustment limit has been made wider. Change the Resistor R106 from the serial number 56AXXXX1.
3. The gain of the Night Eye mode (+12 dB) has been made wider. Change the Resistors R166, R366 and R566 from the serial
number 53AXXXX1.
4. Improve of the Streaking. Add the Resistors and Capacitors R6, R11, R241, R441, C151 and C351  from the serial number
53AXXXX1.
5. Improve of the Streaking. Change the Capacitors C7, C127, C327 and C527  from the serial number 51AXXXX1.
Supplement - 1 
This service information is designed for experienced repair technicians only and is not designed for use by the
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could
result in serious injury or death.
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage within 
the unit may have sufficient magnitude to cause electric 
shock. Therefore, it is dangerous to make any kind of contact 
with any inside part of this unit.
This symbol alerts the user that important literature concerning 
the operation and maintenance of this has been included.
Therefore,  it  should  be  read  carefully  in  order  to avoid 
any problems.
T
here are special components used in this equipment which are important for safety. These parts are indicated 
by the ”
 
Y
 
” mark on the schematic diagram and the replacement parts list. It is essential that these critical 
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
IMPORTANT SAFETY NOTICE
System Control Board (YWVKCF565E3A)
1. Out of the Black Balance when the Night Eye mode. Change the IC3 from the serial number 6YAXXXX1.
2. Out of the Character Position. Change the Capacitor C52 from the serial number 52AXXXX1.
Digital Board (YWVKBF565E3A)
1. Improve of the the Noise when low temperature. Change the Resistors R24, R52, R224, R226 and R273, and delete Resistors
R221 and R267, and add the Resistors and Capacitors R222, R243, C16 and C33 from the serial number 52AXXXX1.
2. Improve of the the Vertical Noise because of the DNR problem. Change the Resistor R15, and add the Transistor Q6 from the
serial number 52AXXXX1.
Mother Board (YWVKBF565P4A)
Improve of the Buzz sound. Change the Capacitor C13 from the serial number 4YAXXXX1.
Ref No.
Original Part Number
(YWVKBF565E1A) B-rank  Pattern
Drive  Board (YWVKBF565E1A)
New  Part  Number
Description
R56
R71
R72
R128,130
R134
R137
R138
C67
C83
L14
ERJ3GEYJ100
––––––––––––
ERJ3GEYJ330
ERJ3GEYJ220
ERJ3GEYJ220
ERJ3GEYJ220
––––––––––––
––––––––––––
––––––––––––
––––––––––––
––––––––––––
ERJ3GEYJ330
––––––––––––
YWR0816P101D
ERJ3GEYJ101
––––––––––––
ERJ3GEYJ220
YWSK1C106KRC
YW5CH220J5VB
ELJFC8R2MF
Carbon
33 ohms 1/16W
Metal
100 ohms 1/16W
Carbon
100 ohms 1/16W
Carbon
22 ohms 1/16W
Tantalum
10 
µ
F 16V
Ceramic
22 pF
Coil
8.2 
µ
H
(YWVKCF565E1A) B-rank  Pattern
Pre-amp.  Board (YWVKCF565E1A)
(YWVKCF565E2A) D-rank  Pattern
Sync/Encoder  Board (YWVKCF565E2A)
R118,218
R318
ERJ3GEYJ754
ERJ3GEYJ754
ERJ3GEYJ125
ERJ3GEYJ155
Carbon
1.2M ohms 1/16W
Carbon
1.5M ohms 1/16W
(YWVKBF565E2A) D-rank  Pattern
Preprocess  Board (YWVKBF565E2A)
IC35
R51
R618
R622,623
C29,32,107
C42
C312,313
C315
UPD74HC4053G
ERJ3GEYJ683V
ERJ3GEYJ101
YWR0816P102D
YW5CH220J5VB
SK21V474KRA
YW5CH330J5VB
––––––––––––
YWUPD4053BG
ERJ3GEYJ333
ERJ3GEYJ332
ERJ3GEY0R00
YW5CH100J5VB
YWSK1V104KRA
––––––––––––
YW5CH151J5VB
IC
Carbon
33K ohms 1/16W
Carbon
3.3K ohms 1/16W
Carbon
0 ohm 1/16W
Ceramic
10 pF
Tantalum
0.1 
µ
F 35V
Ceramic
150 pF
R6,11
R106
R166,336,566
R241,441
R158,358,558
C7
C127,327,527
C151,351
ERJ3GEYJ102
YWR0816P331D
YWR0816P302D
––––––––––––
ERJ3GEYJ223
YWRVS0J101M
YWRVS0J470M
––––––––––––
ERJ3GEYJ151
YWR0816P102D
YWR0816P472D
ERJ3GEYJ114
ERJ3GEYJ123
SK41A107ME
SK20G476KRC
F1H1H5R00002
Carbon
150 ohms 1/16W
Metal
1K ohms 1/16W
Metal
4.7K ohms 1/16W
Carbon
110K ohms 1/16W
Carbon
12K ohms 1/16W
Tantalum
100 
µ
F 6.3V
Tantalum
47 
µ
F 4V
Ceramic
5 pF
COMPARISON PARTS LIST
Printed  in  Japan
H-056
N
N
12,23,33
Ref No.
Original Part Number
New  Part  Number
Description
(YWVKBF565P3A) D-rank  Pattern
Digital  Board (YWVKBF565E3A)
Q6
R15
R24
R52
R222,243
R224
R226
R273
2SB1132-Q
YWR0816P273
YWR0816P132D
YWR0816P221D
ERJ3GEY0R00
ERJ3GEY0R00
YWR0816P112D
YWR0816P101D
––––––––––––
YWR0816P133D
YWR0816P102D
YWR0816P122D
––––––––––––
YWR0816Q220D
YWR0816P152D
YWR0816P152D
Metal
13K ohms 1/16W
Metal
1K ohms 1/16W
Metal
1.2K ohms 1/16W
Metal
220 ohms 1/16W
Metal
1.5K ohms 1/16W
Metal
1.5K ohms 1/16W
(YWVKCF565E3A) D-rank  Pattern
System Control Board (YWVKCF565E3A)
IC3
C52
YWM27C512F60
5CH150J5V
SK31A106B
M27C512F65
5CH040D5V
IC
Ceramic
4 pF
(YWVKBF565P4A) D-rank  Pattern
Mother  Board (YWVKBF565P4A)
C13
YWSK1V105KRB
Tantalum
µ
F 35V
Display

Panasonic WV-F565 Service Manual / Supplement ▷ Download

  • DOWNLOAD Panasonic WV-F565 Service Manual ↓ Size: 47.08 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Supplement for the Panasonic WV-F565 in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic WV-F565 Provideo. Information contained in Panasonic WV-F565 Service Manual / Supplement (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.