Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online
ADJ-13
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
3. Select the Model no. according to the methods below and click [OK] button.
1) Check [Manual Select] and search the model name by input the all or part of model name in [keyword].
2) Check [Network Search...] and select the IP address of projector, when click the [Search] bottom, the network connec-
tion information of projector is displayed.
4. Select the connection method to the projector [LAN] or [Serial] with [Connection] menu and set up its connection informa-
tion.
Click the[Connection Check] button to check the connection of the projector.
LAN terminal connection
• Select [LAN] and set up IP Address, Username, Password and Command Port.
[Note] If the Username and Password has been changed, please select serial terminal connection.
Serial terminal connection
• Select [Serial] and set up the port, baudrate and parity.
Items
Initial value
LAN
IP Address
192.168.10.100
Username
admin1
Password
panasonic
Command Port
1024
Serial
Port
–
Baud Rate
9600bps
Parity
None
ADJ-14
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
"Check: OK" -> Click the [OK] button and step to the next.
"Check: NG" -> Check the setting in step 4.
5. Select the Microcomputer's firmware file,Click the [load] button.
6. Select the new firmware, and click [Open] button.
* The firmware combines
the Main, Sub and Net-
work firmware.
* DIGITAL LINK can be
updated via serial con-
nection only.
Display example of Serial terminal connection
Display example of LAN terminal connection
ADJ-15
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
7. After loading the firmware, a checkmark and path name to the firmware and the version will be displayed on the window.
Click [Update] button to start updating of the firmware if the all information is right .
8. Click [OK] button to start updating if the software version is right.
9. During updating, the message "Now updating....." appears and all the LED are blinking. After finishing updating, the mes-
sage "Waiting for Projector reboot..." appears and the projector sets into standby mode when turn it on again. (The LED
stops blinking.)
* Don't operate the projector
during updating.
* Never disconnect the
AC cord during updating.
* Please disconnect the AC cord then plug it, if the message "Waiting for
Projector reboot" appears or the pop-up OSD disappears and the LED
don't blink after waiting for about 1 minute .
ADJ-16
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
10. When the tool detects that the projector has rebooted, the conformation window will appear. Click the [OK] button to close
the window.
* If the version of the firmware is the same, its updating will be skipped.
11 Click the [EXIT] button to quit the application.
12. Turn the projector on and display the [EXTRA OPTION] menu. Confirm that the version of the Main CPU is updated cor-
rectly on the [SELF CHECK] item.
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.