PT-VZ585N, PT-VW545N, PT-VX615N, PT-VZ580, PT-VW540, PT-VX610 (serv.man3) — Panasonic Projector Service Manual (repair manual). Page 8

View Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual online

8
PREFACE
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
Operating 
environment
Operating  
environment  
temperature
0 °C (32 °F) to 40 °C (104°F)
*3*4
Operating  
environment  
humidity
20 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operation range
Within approx. 7 m (22'11") (when operated directly in front of signal receiver)
Weight
102 g (3.6 ozs.) (including batteries)
Dimension
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 
Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2  This is an average value. It may differ depending on individual product.
*3  The operating environment temperature becomes 0 °C (32 °F) to 30 °C (86 °F) when using at a sea level between 1 200 m (3 937') ~  
2 700 m (8 858').
*4  When the projector is used with the [PROJECTOR SETUP] menu → [LAMP POWER] set to [NORMAL], the [LAMP POWER] will be 
forcibly switched to [ECO1] to protect the projector if the operating environment temperature exceeds 35 °C (95 °F).
Note
 
f
The part numbers of accessories and separately sold components are subject to change without notice.
 
r
Connecting terminals
<COMPUTER 1 IN>
1 set, high-density D-Sub 15 p (female)
RGB signal 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
  
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
YP
B
P
R
 signal 
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<COMPUTER 2 IN/ 1 
OUT>
1 set, high-density D-Sub 15 p (female), monitor output compatible
RGB signal 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
 
 HD/SYNC TTL high impedance, automatic positive/negative polarity compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
YP
B
P
R
 signal 
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN>
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN> / 
<HDMI 2 IN>
2 sets, HDMI 19 pin, HDCP and Deep Color compatible
Audio signal         Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1> / 
<AUDIO IN 2>
2 sets, M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more
<AUDIO IN 3>
1 set, Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more
<VARIABLE AUDIO 
OUT>
1 set, M3 stereo mini jack, monitor output and stereo compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less
<USB A (VIEWER)>
1 set, USB connector (type A), for Memory Viewer function / Pairing function
<USB B (DISPLAY)>
1 set, USB connector (type B), for USB display function
<SERIAL IN>
1 set, D-sub 9 pin (female), RS-232C compliant, for computer control use
<DIGITAL LINK/LAN>
1 set, RJ-45, for network, DIGITAL LINK connection (HDBaseT
TM
 compliant), PJLink compatible, 100Base-TX, 
HDCP compatible, Deep Color compatible
 
r
Wireless LAN
Specification 
standards
IEEE802.11a/b/g/n
Transmission formats DSSS, OFDM
Modulation
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission speed 
IEEE802.11b: Up to 11 Mbps
IEEE802.11g/a: Up to 54 Mbps
IEEE802.11n: Up to 300 Mbps 
Communication 
distance
Approx. 30 m (98′5") (depending on the operating environment)
ENGLISH - 175
Chapter 7   Appendix - Specifications
For PT-VZ585N,PT-VW545N,PT-VX615N
Page of 100
Display

Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.