DOWNLOAD Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ↓ Size: 21.33 MB | Pages: 100 in PDF or view online for FREE

Model
PT-VZ585N PT-VW545N PT-VX615N PT-VZ580 PT-VW540 PT-VX610 (serv.man3)
Pages
100
Size
21.33 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vz585n-pt-vw545n-pt-vx615n-pt-vz580-pt-vw540-pt.pdf
Date

Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online

5
PREFACE
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
Table of Contents
1. Safety Precautions
2. Specifications
3. Dimensions
SECTION 1 SERVICE INFORMATION
1. The name of each part
2. Menu Navigation
3. Service Mode
4. Notes on service
5. Lamp and Temperature indicators
SECTION 2 DISASSEMBLY PROCEDURES
1. Parts Locations
2. Mechanical and Electrical Parts Disassembly
3. Optical Parts Disassembly
<Cable reforming>
SECTION 3 ADJUSTMENTS
1. Adjustment Items and Procedures
2. Firmware Update Procedure
For the block diagrams, schematic diagrams and parts list, refer to each separated booklet "Block and Schematic 
diagrams" and "Parts List" respectively.
6
PREFACE
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
1. Safety Precautions
1.1. General Guidelines
  - For continued safety, no modification of any circuit must be attempted.
  - Unplug the power cord from the power outlet before disassembling this projector.
  - Use correctly the supplied power cord and must ground it.
  - It is advisable to use an isolation transformer in the AC power line before the service.
  -  Be careful not to touch the rotation part (cooling fan, etc.) of this projector when you service with the upper case removed and the power 
supply turned ON.
  -  Observe the original lead dress during the service. If a short circuit is found, replace all the parts overheated or damaged by the short 
circuit.
  -  After the service, all the protective devices such as insulation barriers, insulation papers, shields, and isolation R-C combinations must 
be properly installed.
  - After the service, check the leakage current to prevent the customer from getting an electric shock.
1.2. Leakage Current Check
  1. Prepare the measuring circuit as shown in Fig.1.
    Be sure to use a voltmeter having the performance described in Table 1.
  2. Assemble the circuit as shown in Fig. 2. Plug the power cord in a power outlet.
  3. Connect M1 to T1 according to Fig. 2 and measure the voltage.
  4. Change the connection of M1 from T1 to T2 and measure the voltage again.
  5.  The voltmeter must read 0.375 V or lower in both of steps 3 and 4. This means that the current must be 0.75mA or  less.
  6.  If the reading is out of the above standard, the projector must be repaired and rechecked before returning to the customer because of a 
possibility of an electric shock.
 
 
 
  
  
M1
M2
Rs
Cs
Rb
10KΩ ±0.1%
0.022µF
±1.0%
Vb
(V) V
Rs: 1500 Ω±0.1%
Cs: 0.22 µF±1.0%
Rb: 500 Ω±0.1%
to T1
or T2
in FIg.2
Weighted leakage current=Vb / 500 (A)
Fig. 1
Isolation transformer
T1
T2
connection
to power outlet
M1
M2
Fig.2
Projector
Measuring
Circuit (Fig.1)
Performance
Voltmeter
(rms reading)
Accurancy: 
≤ 2%
Input resistance: 
≥ 1 MΩ
Input capacitance:  ≤ 200 pF
Frequency range:  15 Hz to 1 MHz
Table. 1
1.3. UV Precaution and UHM Lamp Precautions
  - Be sure to unplug the power cord from the power outlet when replacing the lamp.
  -  Because the lamp reaches a very high temperature during its operation, wait until it cools completely when replacing the Lamp Unit.
  -  The lamp emits small amounts of UV-radiation, avoid direct-eye contact with the light.
  -  The lamp unit has high internal pressure. If improperly handled, explosion might result.
  - Because the high pressure lamp involves a risk of failure, never touch the lamp wire lead during the service.
7
PREFACE
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
2. Specifications
For PT-VZ585N,PT-VW545N,PT-VX615N
Specifications
The specifications of this projector are as follows.
Power supply
120 V ~ (120 V alternating current), 50 Hz/60 Hz (For North America)  
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz (For other countries) 
Power consumption
PT-VZ585N
400 W (3.8 A) for North America
410 W (4.7 A - 2.0 A) for other countries
PT-VW545N, PT-VX615N
385 W (3.6 A) for North America
400 W (4.5 A - 2.0 A) for other countries
Power consumption (during standby)
When [STANDBY MODE] is 
set to [ECO]
approx. 0.3 W for North America
approx. 0.5 W for other countries
When [STANDBY MODE] is set to [NORMAL] and [IN STANDBY MODE] of [AUDIO SETTING] is 
set to [OFF]: approx. 14 W
LCD panel
Size
PT-VZ585N
1.63 cm (0.64") (aspect ratio 16 : 10)
PT-VW545N
1.63 cm (0.64") (aspect ratio 16 : 10)
PT-VX615N
1.6 cm (0.63") (aspect ratio 4 : 3)
Display system
Translucent screen LCD panel 3 panels, 3 primary color system
Drive system
Active matrix 
Number of pixels
PT-VZ585N
2 304 000 pixels (1 920 x 1 200 dots) x 3 panels
PT-VW545N
1 024 000 pixels (1 280 x 800 dots) x 3 panels
PT-VX615N
786 432 pixels (1 024 x 768 dots) x 3 panels
Lens
PT-VZ585N
Manual zoom: 1.6x
Focus: F 1.6 - 2.12, f 15.30 mm - 24.64 mm
PT-VW545N, PT-VX615N
Manual zoom: 1.6x
Focus: F 1.6 - 1.9, f 15.31 mm - 24.64 mm
Luminous lamp
280 W, UHM lamp
Light output *
1
PT-VZ585N
5 000 lm
PT-VW545N
5 500 lm 
PT-VX615N
5 500 lm 
(When [PICTURE MODE] is set to [DYNAMIC], [LAMP POWER] is set to [NORMAL], [DAYLIGHT 
VIEW] is set to [OFF], and [AUTO POWER SAVE] is set to [OFF])
Center to corner zone ratio
*1
85 %
Contrast ratio *
1
16 000:1  
(When [PICTURE MODE] is set to [DYNAMIC], [LAMP POWER] is set to [NORMAL], [IRIS] is set to 
[ON], [DAYLIGHT VIEW] is set to [OFF], and [AUTO POWER SAVE] is set to [OFF])
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projected image size
0.76 m -7.62 m (30"-300")
image aspect ratio
PT-VZ585N, PT-VW545N
16:10
PT-VX615N
 4:3
Projection method
[FRONT/CEILING], [FRONT/DESK], [REAR/CEILING], [REAR/DESK]
Speaker
4.0 cm, round, x 1
Maximum usable volume output
10 W (monaural)
Power cord length
2.0 m (78-3/4") 
Outer case
Molded plastic
Outer color
White
Dimensions
Width
389 mm (15-5/16")
Height
125 mm (4-29/32") (with legs at shortest position)
Depth
332 mm (13-1/16")
Weight
Approx. 4.9 kg (10.8 lbs.) *
2
Noise level *
1
When [LAMP POWER] is set to [NORMAL]: 37 dB
When [LAMP POWER] is set to [ECO1]: 35 dB
When [LAMP POWER] is set to [ECO2]: 29 dB
174 - ENGLISH
Chapter 7   Appendix - Specifications
8
PREFACE
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
Operating 
environment
Operating  
environment  
temperature
0 °C (32 °F) to 40 °C (104°F)
*3*4
Operating  
environment  
humidity
20 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operation range
Within approx. 7 m (22'11") (when operated directly in front of signal receiver)
Weight
102 g (3.6 ozs.) (including batteries)
Dimension
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 
Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2  This is an average value. It may differ depending on individual product.
*3  The operating environment temperature becomes 0 °C (32 °F) to 30 °C (86 °F) when using at a sea level between 1 200 m (3 937') ~  
2 700 m (8 858').
*4  When the projector is used with the [PROJECTOR SETUP] menu → [LAMP POWER] set to [NORMAL], the [LAMP POWER] will be 
forcibly switched to [ECO1] to protect the projector if the operating environment temperature exceeds 35 °C (95 °F).
Note
 
f
The part numbers of accessories and separately sold components are subject to change without notice.
 
r
Connecting terminals
<COMPUTER 1 IN>
1 set, high-density D-Sub 15 p (female)
RGB signal 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
  
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
YP
B
P
R
 signal 
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<COMPUTER 2 IN/ 1 
OUT>
1 set, high-density D-Sub 15 p (female), monitor output compatible
RGB signal 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
 
 HD/SYNC TTL high impedance, automatic positive/negative polarity compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
YP
B
P
R
 signal 
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN>
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN> / 
<HDMI 2 IN>
2 sets, HDMI 19 pin, HDCP and Deep Color compatible
Audio signal         Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1> / 
<AUDIO IN 2>
2 sets, M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more
<AUDIO IN 3>
1 set, Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more
<VARIABLE AUDIO 
OUT>
1 set, M3 stereo mini jack, monitor output and stereo compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less
<USB A (VIEWER)>
1 set, USB connector (type A), for Memory Viewer function / Pairing function
<USB B (DISPLAY)>
1 set, USB connector (type B), for USB display function
<SERIAL IN>
1 set, D-sub 9 pin (female), RS-232C compliant, for computer control use
<DIGITAL LINK/LAN>
1 set, RJ-45, for network, DIGITAL LINK connection (HDBaseT
TM
 compliant), PJLink compatible, 100Base-TX, 
HDCP compatible, Deep Color compatible
 
r
Wireless LAN
Specification 
standards
IEEE802.11a/b/g/n
Transmission formats DSSS, OFDM
Modulation
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission speed 
IEEE802.11b: Up to 11 Mbps
IEEE802.11g/a: Up to 54 Mbps
IEEE802.11n: Up to 300 Mbps 
Communication 
distance
Approx. 30 m (98′5") (depending on the operating environment)
ENGLISH - 175
Chapter 7   Appendix - Specifications
For PT-VZ585N,PT-VW545N,PT-VX615N
Page of 100
Display

Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.