Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT Service Manual ▷ View online
7
PREFACE
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 This is an average value. It may differ depending on individual product.
*4 [LAMP POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C (95 °F) to
40 °C (104 °F).
Note
f
The part numbers of accessories and separately sold components are subject to change without notice.
Power cable length
2.0 m (78-3/4")
Cabinet
Molded plastic
Dimensions
Width: 389 mm (15-5/16")
Height: 125 mm (4-29/32") (when adjustable feet shortened)
Depth: 332 mm (13-1/16")
Weight
Approx. 4.9 kg (10.8 lbs.) *
3
Noise level *
1
When set to [NORMAL] in [LAMP POWER] : 37 dB
When set to [ECO] in [LAMP POWER] : 29 dB
Operating environment
Operating environment temperature*
4
:
0 °C (32 °F) to 40 °C (104 °F) (Elevation: below 1 200 m (3 937'))
0 °C (32 °F) to 30 °C (86 °F) (Elevation: 1 200 m (3 937') ~ 2 700 m (8 858'))
Operating environment humidity: 20 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range
Approx. 7 m (22'11-5/8") (when operated directly in front of receiver)
Weight
102 g (3.60 ozs.) (including batteries)
Dimensions
Width : 48 mm (1-7/8"), Length : 145 mm (5-23/32"), Height : 27 mm (1/16")
148 - ENGLISH
Chapter 7 Appendix - Specifications
8
PREFACE
INF-1
CONTENTS
Service Information
Model No. PT-VZ575N series
PT-VW535N series
PT-VX605N series
SECTION 1 SERVICE INFORMATION
Rev.-1 (2014-09)
SECTION 1 SERVICE INFORMATION
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote controls
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote controls
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
4. External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-18
5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts
5. 2. Service
5. 3. Replacement of consumable parts
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-23
6. 1. Shutdown system
6. 2. Lamp log data acquisition method
6. 3. Troubleshooting
6. 2. Lamp log data acquisition method
6. 3. Troubleshooting
INF-2
SECTION 1 SERVICE INFORMATION
1. The name of each part
1. 1. Projector body
Attention
f
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f
In addition, please read the contents that are related to batteries in the "Read this first!".
Note
f
The remote control can be used within a distance of about 7 m (22′11-5/8″) if pointed directly at the remote control signal
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not
operate correctly.
f
You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to
the loss of light caused by the properties of the screen.
f
When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become
inoperative. Set the projector as far from the luminous source as possible.
Projector body
4
1
2
3
5
4
12
13
6
6
6 6
7
8 9 10 11
r
Front
r
Side
r
Rear
Projection direction
WARNING
Keep your hands and other objects away from the air
exhaust port.
f
Keep your hands and face away.
f
Do not insert your fingers.
f
Keep heat-sensitive objects away.
Heated air from the air exhaust port can cause burns,
injury, or deformations.
1 Remote control signal receiver
2 Focus Lever
2 Focus Lever
Adjusts the focus.
3 Zoom Lever
Adjusts the zoom.
4 Adjustable feet
Adjusts the projection angle.
5 Projection Lens
6 Air exhaust port
7 Speaker
8 <AC IN> terminal
6 Air exhaust port
7 Speaker
8 <AC IN> terminal
Connects the supplied power cord.
9 Security slot
This security slot is compatible with the Kensington security
cables.
10 Connecting terminals (
Æ
page 27)
11 Burglar hook port
Attaches a burglar prevention cable, etc.
12 Air filter cover
The air filter unit is inside.
13 Air intake port
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
原产地:中国
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
ENGLISH - 25
Chapter 1 Preparation - About your projector
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT service manuals if exist.