PT-VZ575N, PT-VZ575ND, PT-VZ575NT, PT-VW535N, PT-VW535ND, PT-VW535NT, PT-VX605N, PT-VX605ND, PT-VX605NT — Panasonic Projector Service Manual (repair manual). Page 6

View Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT Service Manual online

6
PREFACE
Applicable 
scanning 
frequency 
For HDMI signal
525i(480i)*
2
, 625i(576i)*
2
, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/25p, 1125(1080)/30p, 1125(1080)/60p, 
1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: 25 MHz to 162 MHz
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
0.76 m -7.62 m (30"-300")
Screen aspect ratio
PT-VZ575N, PT-VW535N 16:10
PT-VX605N
4 : 3
Projection scheme
[FRONT/DESK], [FRONT/CEILING], [REAR/DESK], [REAR/CEILING]  
(Menu setting system)
Speaker
1 (4.0 cm round-type)
Maximum usable volume output 10 W
Terminals
<COMPUTER 1 IN>
1 set, high-density D-Sub 15 p (female)
[RGB signal] 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
  
HD/SYNC TTL high impedance, automatic positive/negative polarity  
compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
B
P
R
 signal]  Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
[Y/C signal] 
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<COMPUTER 2 IN/ 
1 OUT>
1 set, high-density D-Sub 15 p (female)
[RGB signal] 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
 
 HD/SYNC TTL high impedance, automatic positive/negative polarity 
compatible  
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
B
P
R
 signal]  Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN>
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN> / 
<HDMI 2 IN>
2 set (HDMI 19 pin, HDCP and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN>
2 set (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
(<AUDIO IN 2 (MIC IN)> terminal support MIC input)
1 set (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
<VARIABLE AUDIO 
OUT>
1 set (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
<USB A (VIEWER)> 1 set USB connector (type A x 1)
<USB B (DISPLAY)> 1 set USB connector (type B x 1)
<SERIAL IN>
1 set (D-sub 9 pin, RS-232C compliant, for computer control use)
<DIGITAL LINK/
LAN>
1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
Wireless 
LAN
Specification 
standards
For North America: 
IEEE802.11b/g/n : 2.412 GHz - 2.462 GHz
IEEE802.11a/n : 5.180 GHz - 5.825 GHz (except 5.600 GHz - 5.650 GHz)
For other counties:
IEEE802.11b/g/n : 2.412 GHz - 2.472 GHz
IEEE802.11a/n : 5.180 GHz - 5.850 GHz
Wireless channel
For North America: 
IEEE802.11b/g/n: 1~11 channel
IEEE802.11a/n:  36/40/44/48/52/56/60/64/100/104/108/112/116/132/136 
/140/149/153/157/161/165 channel 
For other counties:
IEEE802.11b/g/n: Passive scanning
IEEE802.11a/n: Passive scanning
Communication 
distance
Approx. 30 m (depending on the operating environment)
ENGLISH - 147
Chapter 7   Appendix - Specifications
Page of 111
Display

Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT service manuals if exist.